Makita LS1040 10" Compound Miter Alternatives: 6 Similar Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for makita ls1040 10 compound miter alternatives that match your specific needs. The original Makita LS1040 offers a 15-amp motor running at 4,600 RPM with a 10-inch blade. It weighs 27 pounds and features a dual post compound pivoting arm. This design allows for miter cuts up to 52 degrees right and 47 degrees left. It also provides bevel cuts up to 45 degrees to the left. You might want a different tool if you need more cutting capacity or portability. Some buyers prefer sliding mechanisms for wider boards. Others prioritize a lighter frame for job site transport. You may also need dual bevel capability for complex angles.
The 6 alternatives listed here were chosen because their specifications overlap with the Makita LS1040. Each option shares key traits like a 10-inch blade diameter or a 15-amp motor. We compared weight, dimensions, and cutting angles to find suitable matches. The list includes compact single-bevel saws for those who value lightness. It also features sliding compound miter saws for users needing extended reach. Some picks offer dual bevel functions for greater flexibility. You will find options tailored for jobsite mobility or workshop stability. Review the specs to see which tool fits your workflow best.
Our top pick: Makita 10-Inch Compound Miter Saw.
Comparing these miter saws
Metabo HPT 10-Inch Compound Miter Saw
The Metabo HPT C10FCG2 weighs 24.2 pounds, making it 2.8 pounds lighter than the Makita LS1040. This reduction in mass improves portability for job site transport. It retains the standard 15-amp motor and 10-inch blade size found in the original. However, it lacks the dual post compound arm design. You get a single-bevel cutting capability instead. The footprint is slightly larger at 23.6 inches in length. This model suits users who prioritize weight savings and basic durability over the extended miter range of the Makita. It is a solid choice for simple compound cuts where every pound counts.
SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand
The SKIL TS6307-00 is a jobsite table saw, not a miter saw. It weighs 51.2 pounds and includes a stand for stability. This tool offers rip cutting capabilities that a miter saw cannot provide. It uses a 10-inch blade and a 15-amp motor. The fence system is designed for accuracy on long boards. You should choose this if you need to rip sheet goods or wide lumber. It sacrifices the angled cutting precision of the LS1040. The stand adds mobility but increases the total weight significantly. This is for contractors who need a versatile saw for breakdown cuts rather than trim work.
SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw
The SKIL MS6305-00 is a sliding compound miter saw. It weighs 39.4 pounds, which is 12.4 pounds heavier than the Makita. It features dual bevel cuts, allowing you to change bevel angles without flipping the workpiece. The sliding mechanism extends its cutting width significantly. It includes an LED shadow line for better visibility. You gain the ability to cut wider boards and more complex bevel angles. You lose the lightweight portability of the LS1040. The larger footprint requires more workspace. This saw is ideal for woodworkers who need dual bevel flexibility and extended reach for larger projects.
DEWALT 10-Inch Table Saw with Rolling Stand
The DEWALT DWE7491RS is a table saw with a rolling stand. It weighs 110 pounds, making it much heavier than the Makita. It provides a 32-1/2-inch rip capacity, which is far beyond the scope of a miter saw. The 15-amp motor drives a rack-and-pinion fence for precise alignment. You get mobility via the rolling stand, but it is not designed for quick transport like a miter saw. This tool is for wide ripping and sheet sizing. It replaces the need for a separate table saw. Choose this if your primary need is breaking down large panels rather than making angled crosscuts.
DOVAMAN 10-Inch 2-Speed Sliding Miter Saw
The DOVAMAN DMS01A is a sliding miter saw with a 2-speed motor. It weighs 37.5 pounds, which is 10.5 pounds heavier than the Makita. It features a sliding mechanism for wider cuts. The 2-speed setting allows for optimized cutting on different materials. It has a 15-amp motor and a 10-inch blade. The footprint is 34 inches in length. You gain versatility for multi-material cutting and extended sliding range. You lose the compact, lightweight design of the LS1040. This saw is better suited for workshop use. It is not ideal for frequent job site transport. Pick this if you need material-specific speed settings and wider cutting capacity.
VEVOR 10-Inch Dual Bevel Sliding Miter Saw
The VEVOR J1G-ZP33-K255D is a dual bevel sliding miter saw. It weighs 39.7 pounds, making it 12.7 pounds heavier than the Makita. It offers dual bevel cuts and a sliding range for wider boards. The design supports wall-mounting for space savings. It includes an LED for precision alignment. You get advanced bevel flexibility and mounting options. You sacrifice the lightweight portability of the LS1040. The larger base requires more floor space. This saw is for users who prioritize sliding width and dual bevel capability. It is suitable for fixed workshop setups where mobility is less important than cutting capacity.
Quick picks
Our 7 picks
Makita 10-Inch Compound Miter Saw
Best for: Standard miter and bevel cutting tasks
- Blade Diameter
- 10"
- Amperage
- 15 AMP
- No-Load Speed
- 4,600 RPM
- Dimensions
- 20 × 10 × 21 inches
- Weight
- 27 pounds
This Makita LS1040 is a 10-inch compound miter saw with a 15-amp motor running at 4,600 RPM. It features a dual post pivoting arm and a machined aluminum base. The saw handles miter cuts from 52 degrees right to 45 degrees left, with nine positive stops. It offers 45-degree left bevel cuts. This tool suits users needing reliable single-bevel capability for general woodworking tasks.
Pros
- 15-amp direct drive motor delivers 4,600 RPM
- Miter cuts range from 52 degrees right to 45 degrees left
- Nine positive miter stops for common angles
- Durable machined aluminum base and dual slide rails
Cons
- Single bevel design limits cutting flexibility compared to dual bevel models
- Non-sliding head restricts maximum cut width
- No digital angle display for precise setting verification
Good fit if
- You need a reliable saw for standard miter and bevel cuts
- You prefer a lightweight tool under 30 pounds for portability
- You value positive stops for quick setup of common angles
Skip if
- You frequently cut wide boards requiring a sliding mechanism
- You require dual bevel capability for complex crown molding
- You need digital readouts for high-precision angle adjustments
Verdict: Makita 10-Inch Compound Miter Saw provides solid performance for basic miter and bevel tasks. It fits woodworkers who prioritize a lightweight, durable tool with essential positive stops over advanced sliding or dual-bevel features.
Metabo HPT 10-Inch Compound Miter Saw
Best for: Portable single-bevel compound cutting tasks
- Blade Diameter
- 10-Inch
- Amperage
- 15-Amp
- No-Load Speed
- 5,000 RPM
- Dimensions
- 23.6 × 18.3 × 21.8 inches
- Weight
- 24.2 pounds
The Metabo HPT C10FCG2 is a 10-inch single bevel compound miter saw with a 15-amp motor. It reaches 5,000 RPM for precise cuts. Weighing 24.2 lbs, it offers portability. The 0-52 degree miter range and 0-45 degree bevel range provide versatility. It includes a vice clamping system for workpiece security. This tool suits users needing a lightweight, durable saw for various woodworking projects.
Pros
- 15-amp motor delivers high power for effortless cutting
- Lightweight 24.2 lb design for easy transport
- 0-52 degree left and right miter angle range
- Vice clamping system secures workpieces for safety
Cons
- Single bevel capability limits angled cut options
- No-Load speed of 5,000 RPM is standard for this class
- Lacks sliding mechanism for wider material cuts
Good fit if
- You need a lightweight saw for job site mobility
- You require a durable tool with a 5-year warranty
- You primarily make single bevel compound cuts
Skip if
- You need double bevel cutting capabilities
- You require a sliding miter saw for wide boards
- You prefer a heavier, more stable stationary saw
Verdict: Metabo HPT C10FCG2 10-Inch Miter Saw is a portable, single-bevel option for woodworkers who prioritize weight savings and durable construction over sliding capacity or double bevel flexibility.
SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand
Best for: portable jobsite rip cutting
- Blade Diameter
- 10-Inch
- Amperage
- 15 Amp
- Intended Use
- Jobsite
- Dimensions
- 1 × 1 × 1 inches
- Weight
- 51.2 pounds
View on Amazon: SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand
This SKIL model is a 15-amp, 10-inch jobsite table saw designed for portability and accuracy on site. It features a rack and pinion fence system to keep cuts parallel and an integrated folding stand for easy transport. The saw handles 4x4 material at 90 degrees and offers a 2-47 degree bevel range. It weighs 51.2 pounds and includes a dust port for cleanup. This tool suits contractors who need reliable rip cuts in a mobile setup.
Pros
- 15-amp motor delivers consistent power for jobsite tasks
- Rack and pinion fence rails ensure parallel blade alignment
- Integrated folding stand aids portability and storage
- 4x4 cutting capacity at 90 degrees handles large lumber
Cons
- 51.2-pound weight adds bulk for frequent moving
- Single bevel limit restricts complex angled cuts
- No data confirms maximum rip capacity beyond 4x4 height
Good fit if
- You need a portable saw for on-site rip cuts
- You value fence accuracy for parallel cuts
- You require a folding stand for easy transport
Skip if
- You require dual bevel cutting capabilities
- You need a sliding table saw for wider boards
- You prioritize a lightweight tool under 40 pounds
Verdict: SKIL 10-Inch Jobsite Table Saw offers a sturdy, portable solution for contractors who prioritize fence accuracy and easy transport over dual bevel features or extreme lightness.
SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw
Best for: Dual bevel cuts and 2x12 capacity
- Blade Diameter
- 10"
- Amperage
- 15 AMP
- No-Load Speed
- 4,800 RPM
- Dimensions
- 35.4 × 22.4 × 14.2 inches
- Weight
- 39.4 pounds
View on Amazon: SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw
The SKIL MS6305-00 is a 10-inch dual bevel sliding compound miter saw. It features a 15-amp motor running at 4,800 RPM. The dual bevel design allows cuts at 45 degrees left and right. It offers a 2x12 cross-cut capacity at 90 degrees. An LED shadow line improves cut accuracy. This saw suits users needing versatile bevel angles and sliding reach.
Pros
- Dual bevel capability for left and right 45-degree cuts
- 15-amp motor delivers 4,800 RPM for efficient cutting
- LED shadow line provides precise cut alignment
- 2x12 cutting capacity at 90 degrees
Cons
- Heavier at 39.4 pounds compared to lighter jobsite models
- Larger footprint with a 35.4-inch length
- Single bevel options in the same product line may be lighter
Good fit if
- You need dual bevel cuts for complex joinery
- You require a 2x12 cross-cut capacity
- You prefer LED shadow lines over lasers for accuracy
Skip if
- You need a compact tool for tight job sites
- You only make single bevel cuts
- You prioritize a lighter weight under 30 pounds
Verdict: SKIL 10" Dual Bevel Sliding Miter Saw is a solid choice for woodworkers who need dual bevel angles and sliding reach. It fits those who value the LED shadow line and 2x12 capacity over portability.
DEWALT 10-Inch Table Saw with Rolling Stand
Best for: wide ripping capacity with jobsite mobility
- Blade Diameter
- 10 Inch
- Rip Capacity
- 32-1/2-Inch
- Amperage
- 15 Amp
- No-Load Speed
- 4800 RPM
- Cutting Depth 90
- 3-1/8"
- Dimensions
- 12.2 × 9.65 × 12.2 inches
This DEWALT 10-inch table saw provides a ripping alternative to traditional miter saws. It features a 15-amp motor running at 4,800 RPM, paired with a 32-1/2-inch rip capacity. The rack-and-pinion telescoping fence system allows precise adjustments, while the included folding rolling stand assists mobility. It suits you if you need wide rip cuts alongside standard crosscuts.
Pros
- 32-1/2-inch rip capacity accommodates wide boards
- 15-amp motor delivers 4,800 RPM cutting speed
- Rack and pinion telescoping fence allows smooth adjustments
- Integrated folding rolling stand eases site mobility
Cons
- 110-pound total weight makes solo vehicle loading heavy
- Maximum cut depth limits vertical capacity to 3-1/8 inches
Good fit if
- You need rip-cutting capacity up to 32-1/2 inches instead of miter cuts only.
- You want a wheeled stand for rolling across job sites.
- You cut stock up to 3-1/8 inches thick at 90 degrees.
Skip if
- You require a lightweight cutting tool under 100 pounds for easy lifting.
- You only make angled trim cuts and do not rip boards.
Verdict: DEWALT 10-Inch Table Saw with Rolling Stand suits woodworkers needing wide 32-1/2-inch rip capacity and mobile site transport instead of a dedicated chop saw. Its 15-amp motor and rack-and-pinion fence handle board breakdown and sheet sizing cleanly.
DOVAMAN 10-Inch 2-Speed Sliding Miter Saw
Best for: Multi-material cutting with extended sliding range
- Blade Diameter
- 10-Inch
- Amperage
- 15A
- No-Load Speed
- 5000RPM and 3200RPM
- Feed Speed
- 2-Speed
- Dimensions
- 34 × 20 × 15 inches
- Weight
- 37.5 pounds
The DOVAMAN 10-Inch Sliding Miter Saw offers a 15-amp motor with dual-speed settings at 5000 RPM and 3200 RPM. It features a 13-inch sliding rail for extended cutting range and includes three blades for multi-material use. The ambidextrous design and laser guide aid precision. This tool suits users needing versatility for wood, PVC, and soft metals.
Pros
- Dual-speed motor allows 5000 RPM and 3200 RPM operation
- 13-inch sliding rail provides extended cutting capacity
- Includes two 40-tooth and one 48-tooth TCT blades
- Ambidextrous design supports left and right-handed use
Cons
- Single-bevel configuration limits angle versatility
- 37.5-pound weight is heavy for frequent transport
- No laser guide brightness adjustment specified
Good fit if
- You need to cut multiple materials like wood and PVC
- You require a wide sliding range for larger stock
- You prefer an ambidextrous tool layout
Skip if
- You need dual-bevel cutting capabilities
- You prioritize a lightweight portable design
- You require a laser guide with adjustable brightness
Verdict: DOVAMAN 10-Inch 2-Speed Miter Saw fits users who need a versatile, heavy-duty saw for various materials and wider cuts. It is ideal for workshop use rather than frequent job site transport.
VEVOR 10-Inch Dual Bevel Sliding Miter Saw
Best for: Dual bevel cuts and wall-mounting
- Blade Diameter
- 10"
- Amperage
- 15 Amp
- No-Load Speed
- 5000 RPM
- Dimensions
- 30.3 × 20.9 × 27.6 inches
- Weight
- 39.7 pounds
The VEVOR 10-inch sliding compound miter saw offers 15-amp power and a 5000 RPM no-load speed for cutting hardwoods. Its dual bevel capability allows bi-directional angled cuts for detailed projects. The axial sliding system enables wider crosscuts, while an LED guide projects crisp lines. Weighing 39.7 pounds, it features an upgraded aluminum base for mobility and heat dissipation. This tool suits woodworkers needing precision and flexibility in a compact, wall-mountable design.
Pros
- 15-amp motor delivers 2300W straight-cut and 2800W bevel-cut power
- Dual bevel capability for bi-directional angled cuts
- LED guide projects crisp cut lines for alignment
- Axial sliding system allows wider crosscuts
- Upgraded aluminum base is lighter than cast iron
Cons
- 5000 RPM is lower than many competitors
- 39.7 pounds is heavier than some jobsite models
- No mention of a laser shadow or dust port
Good fit if
- You need dual bevel cuts for complex assemblies
- You want a wall-mountable saw to save floor space
- You prioritize LED precision guides over high RPM
Skip if
- You require single-bevel only simplicity
- You need a saw lighter than 30 pounds
- You prefer cast iron base stability
Verdict: VEVOR 10-Inch Dual Bevel Sliding Miter Saw fits woodworkers who need dual bevel cuts and LED precision in a wall-mountable package. It suits those prioritizing sliding width and base mobility over maximum RPM.
Specifications side by side
| Spec | Makita 10-Inch Compound Miter Saw | Metabo HPT 10-Inch Compound Miter Saw | SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand | SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw | DEWALT 10-Inch Table Saw with Rolling Stand | DOVAMAN 10-Inch 2-Speed Sliding Miter Saw | VEVOR 10-Inch Dual Bevel Sliding Miter Saw |
|---|---|---|---|---|---|---|---|
| Blade Diameter | 10" | 10-Inch | 10-Inch | 10" | 10 Inch | 10-Inch | 10" |
| Rip Capacity | not specified | not specified | not specified | not specified | 32-1/2-Inch | not specified | not specified |
| Amperage | 15 AMP | 15-Amp | 15 Amp | 15 AMP | 15 Amp | 15A | 15 Amp |
| No-Load Speed | 4,600 RPM | 5,000 RPM | not specified | 4,800 RPM | 4800 RPM | 5000RPM and 3200RPM | 5000 RPM |
| Cutting Depth 90 | not specified | not specified | not specified | not specified | 3-1/8" | not specified | not specified |
| Intended Use | not specified | not specified | Jobsite | not specified | not specified | not specified | not specified |
| Feed Speed | not specified | not specified | not specified | not specified | not specified | 2-Speed | not specified |
| Dimensions | 20 × 10 × 21 inches | 23.6 × 18.3 × 21.8 inches | 1 × 1 × 1 inches | 35.4 × 22.4 × 14.2 inches | 12.2 × 9.65 × 12.2 inches | 34 × 20 × 15 inches | 30.3 × 20.9 × 27.6 inches |
| Weight | 27 pounds | 24.2 pounds | 51.2 pounds | 39.4 pounds | 110 pounds | 37.5 pounds | 39.7 pounds |
| Size | Makita LS1040 10 Compound Miter Saw | not specified | 10'' | 10'' | One Size | 10 Inch | 10 in |
| Color | Beige | Green | 10" Table Saw | Multi | Yellow/Black/Silver Table Saw/Stand | A-black | Black |
| Model | LS1040 | C10FCG2 | TS6307-00 | MS6305-00 | DWE7491RS | DMS01A | J1G-ZP33-K255D |
If you evaluate other equipment for your workspace, examine specs for hisense 10 alternatives to compare features directly.
Frequently asked questions
Which alternative is the lightest option?
The Metabo HPT C10FCG2 is the lightest pick at 24.2 pounds. This makes it 2.8 pounds lighter than the Makita LS1040. Its compact design at 18.3 inches wide aids job site transport. You get a 15-amp motor and 10-inch blade in a portable package.
Do any alternatives offer dual bevel cutting?
Yes, the SKIL MS6305-00 and VEVOR J1G-ZP33-K255D both feature dual bevel capabilities. The SKIL model weighs 39.4 pounds and includes an LED shadow line. The VEVOR option weighs 39.7 pounds and supports wall mounting. These models provide flexibility for complex angled cuts.
Which saw has the best sliding capacity?
The SKIL MS6305-00 offers a 2x12 capacity for wide boards. It slides to 35.4 inches long. The DOVAMAN DMS01A also provides an extended sliding range. It weighs 37.5 pounds and features a 2-speed motor for various materials. Both suits workshop use over frequent transport.
Can I use these for ripping wide lumber?
The DEWALT DWE7491RS provides a 32-1/2-inch rip capacity. It includes a rolling stand for mobility. The SKIL TS6307-00 is also designed for jobsite rip cutting. Both table saws handle board breakdown better than standard miter saws. They use 15-amp motors for consistent power.
Which option is best for multi-material cutting?
The DOVAMAN DMS01A is rated for multi-material cutting. It features a 2-speed feed mechanism. This allows you to adjust performance for different densities. The saw weighs 37.5 pounds and measures 34 inches long. It is ideal for workshop environments rather than frequent job site moves.
How do the dimensions compare to the Makita?
The Makita LS1040 measures 20 inches long and 21 inches high. The Metabo HPT is longer at 23.6 inches but slightly taller. The SKIL sliding saw is much longer at 35.4 inches. The DEWALT table saw setup is heavier at 110 pounds. Choose based on your workspace constraints.