15 Best Table Saws with 3576 RPM, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing the best table saws with 3576 RPM requires balancing rotational cutting speed against tool size and weight. We compared 15 models using strictly the specifications published on the listings. The ExploreHorizon 8-Inch Compact Table Saw leads the list because it combines a 6.7-amp motor and an 8-inch blade with a lightweight 30.6-pound footprint.
These compact benchtop units share identical motor speeds and blade sizes, but their physical profiles vary from 15 pounds up to 50.3 pounds. This guide helps you evaluate weights and frame dimensions so you can decide which saw fits your portable DIY projects or jobsite tasks.
Quick picks
The best fit for you
- You want the top-ranked saw for general DIY cuts ExploreHorizon 8-Inch Compact Table Saw Its 6.7-amp motor drives an 8-inch blade at 3576 RPM inside a 30.6-pound frame.
- You want the lightest saw for easy transport PioneerWorks 8-Inch Portable Table Saw It weighs 15 pounds, making it the lightest 3576 RPM option on the list.
- You need the heaviest saw for workbench stability EliteEdge 8-Inch 6.7-Amp Compact Table Saw A 50.3-pound weight provides the heaviest platform among these 6.7-amp saws.
- You have limited bench width for your saw GARVEETECH 8-Inch 6.7-Amp Compact Table Saw A 10-inch width gives you the narrowest footprint among all listed saws.
Our 15 picks
ExploreHorizon 8-Inch Compact Table Saw
Best for: portable DIY woodworking and light jobsite cuts
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8"
- Amperage
- 6.7 A
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 18 × 15 × 22 inches
- Weight
- 30.6 pounds
The ExploreHorizon 8-Inch 6.7A Table Saw runs an 8-inch, 24-tooth blade at 3,576 RPM with a 6.7-amp copper motor. It provides 0 to 45 degree bevel cutting alongside 90-degree cross cuts for jobsite and DIY tasks. At 30.6 pounds with a built-in carry handle, you can transport it between work areas easily. This unit suits you if you need a compact cutting setup with integrated dust collection.
Pros
- 6.7-amp copper motor delivers 3,576 RPM no-load speed
- Dust collection system rated up to 98.5% efficiency
- Blade bevel adjusts from 0 to 45 degrees
- Oversized power switch includes emergency off safety cover
Cons
- 8-inch blade diameter limits cut depth compared to standard 10-inch saws
- 6.7-amp motor provides lower power than standard 15-amp table saws
Good fit if
- You need a portable 30.6-pound saw with a built-in carrying handle.
- You require 0 to 45 degree bevel angles for DIY woodworking.
- You prioritize safety features like a transparent guard and emergency shutoff.
Skip if
- You require a full-size 10-inch blade for thick lumber.
- You need a high-amperage motor exceeding 6.7 amps for heavy-duty ripping.
Verdict: ExploreHorizon 8-Inch 6.7A Table Saw delivers 3,576 RPM cutting performance in a compact 30.6-pound package. It handles basic beveling and DIY trimming where portability matters most.
TrailBlaze 8-Inch 6.7-Amp Table Saw
Best for: compact jobsite cutting and DIY woodworking
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8-Inch
- Amperage
- 6.7-Amp
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 14 × 14 × 13 inches
- Weight
- 31.3 pounds
The TrailBlaze 8-Inch Portable Jobsite Table Saw delivers 3576 RPM using an 800-watt, 6.7-amp pure copper motor. It features an 8-inch 24-tooth blade capable of 90-degree crosscuts and 0 to 45-degree bevels. A built-in particulate collection system targets a 98.5 percent capture rate, while the 14 by 14-inch footprint fits tight spaces. You will find it suits DIY woodworking and jobsite tasks where portability matters.
Pros
- 6.7-amp copper motor delivers 3576 RPM no-load speed
- Particulate collection system with 98.5% capture rate
- Bevel adjustment ranges from 0 to 45 degrees
- Compact footprint measuring 14 by 14 by 13 inches
Cons
- 8-inch blade diameter offers less cutting depth than standard 10-inch models
- 6.7-amp motor provides lower output than full-size 15-amp workshop saws
Good fit if
- You need a compact saw with a small 14 by 14-inch footprint and carry handle.
- You want bevel cutting up to 45 degrees paired with built-in dust collection.
Skip if
- You need a standard 10-inch blade for cutting deeper stock.
- You require a high-output 15-amp motor for heavy-duty timber ripping.
Verdict: TrailBlaze 8-Inch Portable Jobsite Table Saw pairs an 800-watt copper motor and 3576 RPM speed with an integrated particulate capture system. It serves well if you need portable bevel and crosscut capability in a lightweight format.
PioneerWorks 8-Inch Portable Table Saw
Best for: portable DIY woodworking and jobsite cross cuts
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8-inch
- Amperage
- 6.7-Amp
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 14 × 13.5 × 13 inches
- Weight
- 36 pounds
The PioneerWorks 8-Inch Compact Table Saw gives you a portable cutting setup for DIY woodworking and jobsite projects. It runs an 8-inch 24T blade powered by a 6.7-amp copper motor delivering 3576 RPM. You can adjust blade height, make 90-degree cross cuts, and set bevel angles from 0 to 45 degrees. At 36 pounds with an integrated carry handle, it suits woodworkers needing transportable cutting capacity.
Pros
- 6.7-amp pure copper motor operating at 3576 RPM
- 0 to 45 degree bevel cutting with adjustable blade height
- Integrated carry handle and manageable 36-pound weight
- Emergency shutoff safety cover on oversized power switch
Cons
- Smaller 8-inch blade diameter limits maximum cutting depth compared to 10-inch models
- Compact 14 by 13.5-inch frame provides minimal surface support for wide panels
Good fit if
- You need a 36-pound portable saw with an integrated handle for transport.
- You want 0 to 45 degree beveling capability for hobby and jobsite cuts.
- You prioritize safety features like a transparent guard and emergency shutoff switch.
Skip if
- You require a standard 10-inch blade for processing thicker stock.
- You cut full-sized sheet goods that require a wide worktable.
Verdict: PioneerWorks 8-Inch Compact Table Saw delivers 3576 RPM cutting performance in a portable 36-pound frame with 0 to 45 degree bevel adjustments. It serves as a dependable cutting station when you need mobility without sacrificing basic angle control.
SierraSquad 8-Inch Portable Table Saw
Best for: portable DIY woodworking and small cuts
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8-inch
- Amperage
- 6.7-Amp
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 17.7 × 17.7 × 17.7 inches
- Weight
- 31.3 pounds
The SierraSquad 8-Inch Portable Table Saw runs on a 6.7-amp copper motor delivering a 3576 RPM no-load speed. It includes an 8-inch 24-tooth blade and measures 17.7 by 17.7 by 17.7 inches at 31.3 pounds. With its built-in carry handle, transparent blade guard, and 0 to 45 degree bevel adjustment, this unit suits you if you tackle DIY woodwork or small jobsite projects needing basic portable cutting.
Pros
- 3576 RPM no-load speed driven by a 6.7-amp copper motor
- 0° to 45° bevel cut capability with adjustable blade height
- Compact 31.3-pound build equipped with a built-in carry handle
- Includes a transparent blade guard and oversized power switch
Cons
- Smaller 8-inch blade diameter compared to standard 10-inch saws
- 6.7-amp rating provides less power than standard 15-amp jobsite motors
- Maximum rip capacity is not specified in the published data
Good fit if
- You need a compact 31.3-pound table saw with a carry handle for easy transport.
- You require 0° to 45° bevel adjustments for light DIY woodworking.
- You work in a small workspace that accommodates a 17.7-inch cube footprint.
Skip if
- You require a standard 10-inch blade for deeper cutting capacity.
- You need a 15-amp motor to cut dense hardwoods or heavy structural lumber.
Verdict: SierraSquad 8-Inch Portable Table Saw delivers 3576 RPM cutting in a compact 31.3-pound frame designed for portable DIY tasks. Its 6.7-amp copper motor and 0° to 45° bevel range provide essential capability without taking up much workshop space.
PioneerWorks 8-Inch Portable Table Saw
Best for: compact DIY benchtop wood cutting
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8"
- Amperage
- 6.7 A
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 14 × 13.5 × 13 inches
- Weight
- 15 pounds
The PioneerWorks 8-Inch Portable Table Saw offers a compact cutting setup for your workshop or jobsite. Powered by a 6.7-amp pure copper motor, it runs an 8-inch 24T blade at a no-load speed of 3576 RPM. You can adjust the blade for 90-degree cross cuts or bevels up to 45 degrees. It suits DIY woodworkers who need a compact tool for trimming boards and handling light woodworking projects.
Pros
- 6.7-amp copper motor delivering 3576 RPM
- Adjustable blade angle for 0° to 45° bevel cuts
- Rated 98.5% dust collection efficiency
- Emergency shut-off switch cover and clear blade guard
Cons
- 8-inch blade diameter limits maximum cutting depth compared to standard saws
- Compact 14 by 13.5-inch table size restricts support for large sheet goods
- 6.7-amp motor provides less power than standard 15-amp jobsite models
Good fit if
- You need a compact benchtop saw for small DIY woodworking tasks.
- You want bevel cutting capability between 0° and 45°.
- You have limited workspace and need a small footprint machine.
Skip if
- You need a full-size 10-inch blade for cutting thick lumber.
- You require a high-amperage motor for heavy-duty commercial ripping.
Verdict: PioneerWorks 8-Inch Portable Table Saw delivers 3576 RPM cutting performance in an ultra-compact footprint. It provides practical bevel adjustments and basic safety features for everyday DIY woodworking.
PioneerWorks 8-Inch 6.7-Amp Table Saw
Best for: compact DIY woodwork and portable jobsite cutting
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8"
- Amperage
- 6.7 A
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 14 × 13.5 × 13 inches
- Weight
- 15 pounds
The PioneerWorks 8-Inch Portable Table Saw gives you a compact cutting station powered by a 6.7-amp copper motor delivering 3576 RPM. Designed for DIY projects and portable jobsite cutting, it includes an 8-inch 24-tooth blade, a transparent blade guard, and 0 to 45 degree bevel capabilities. With its 14 by 13.5-inch footprint and integrated carry handle, it suits you if you need basic crosscuts and bevels in tight spaces.
Pros
- 6.7-amp pure copper motor delivering 3576 RPM
- Bevel adjustment from 0° to 45° with 90° cross-cutting support
- Emergency-off switch cover and clear blade guard
- Compact 14 by 13.5 by 13-inch dimensions with carry handle
Cons
- 8-inch blade provides less cut depth than 10-inch alternatives
- 6.7-amp motor draws less power than full-size 15-amp jobsite saws
- No stand included in listed specifications
Good fit if
- You need a portable saw with a carry handle for small DIY projects.
- You require bevel cuts up to 45° within a compact workspace.
- You prefer a small 14 by 13.5-inch footprint for benchtop storage.
Skip if
- You require a standard 10-inch blade for deep stock cutting.
- You need a heavy-duty 15-amp motor for continuous thick timber ripping.
Verdict: PioneerWorks 8-Inch Portable Table Saw delivers 3576 RPM cutting performance in an ultra-compact benchtop footprint. It handles essential DIY crosscuts and bevel cuts without taking up excessive workshop space.
EliteEdge 8-Inch 6.7-Amp Compact Table Saw
Best for: portable DIY cutting and light jobsite projects
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8 in
- Amperage
- 6.7-Amp
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 17 × 14 × 22 inches
- Weight
- 50.3 pounds
The EliteEdge 8-Inch 6.7-Amp Jobsite Table Saw provides a 3576 RPM no-load speed for your cuts. It runs on a 6.7-amp pure copper motor paired with an 8-inch, 24-tooth blade. You can set bevel angles from 0 to 45 degrees or make 90-degree cross cuts. With an integrated carry handle and an emergency off switch, this saw suits DIYers and jobsite workers needing portable cutting capacity.
Pros
- 3576 RPM cutting speed powered by a 6.7-amp copper motor
- 0° to 45° bevel adjustment and 90° cross cutting
- Transparent blade guard and oversized power switch with emergency off cover
- Includes 24-tooth 8-inch blade and built-in carry handle
Cons
- 8-inch blade diameter limits maximum cut depth compared to 10-inch saws
- 6.7-amp motor draws less power than standard 15-amp jobsite models
Good fit if
- You need a 3576 RPM compact saw for DIY projects or jobsite tasks.
- You require 0 to 45-degree bevel adjustments and 90-degree cuts.
Skip if
- You need a standard 10-inch blade for deeper cuts.
- You require a higher-amperage motor for heavy-duty timber processing.
Verdict: EliteEdge 8-Inch 6.7-Amp Jobsite Table Saw delivers 3576 RPM cutting performance and 0 to 45-degree bevel flexibility in a portable frame. It offers essential safety features and a 24-tooth blade for light jobsite and DIY tasks.
Garvee 8-Inch 6.7-Amp Table Saw
Best for: compact jobsite and DIY wood cutting
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8 in
- Amperage
- 6.7-Amp
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 12.8 × 14.9 × 16.8 inches
- Weight
- 30 pounds
The Garvee 8-Inch Portable Table Saw is a compact benchtop tool built for jobsite and DIY woodworking. It runs on a 6.7-amp copper motor delivering 3576 RPM with an included 24-tooth blade. You can make 90-degree cross cuts and 0- to 45-degree bevel cuts. Measuring under 17 inches tall, this lightweight saw suits you if you need a transportable cutting station for basic board work in small workshops.
Pros
- 6.7-amp copper motor delivering 3576 RPM
- Bevel cutting capability from 0 to 45 degrees
- Integrated dust collection rated at 98.5% efficiency
- Oversized power switch with emergency off safety cover
Cons
- Smaller 8-inch blade provides less cutting depth than 10-inch models
- 6.7-amp motor draws less power than standard 15-amp jobsite saws
- No stand or rolling base included in specifications
Good fit if
- You need a compact 8-inch saw for portable DIY and jobsite tasks.
- You require bevel cutting angles between 0 and 45 degrees.
- You want a lightweight unit equipped with a built-in carry handle.
Skip if
- You require a full-sized 10-inch blade for cutting thicker lumber.
- You need a high-power 15-amp motor for heavy-duty commercial ripping.
Verdict: Garvee 8-Inch Portable Table Saw delivers 3576 RPM cutting in a compact, portable footprint suited for basic bevel and cross cuts. It provides essential safety covers and high dust efficiency for small-scale DIY tasks.
EliteEdge 8-Inch 6.7-Amp Compact Table Saw
Best for: compact DIY woodworking and light jobsite cuts
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8"
- Amperage
- 6.7 A
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 17 × 15 × 22 inches
- Weight
- 31.3 pounds
The EliteEdge 8-Inch Portable Table Saw delivers 3576 RPM from a 6.7-amp pure copper motor. Built for portable jobsite tasks and DIY woodworking, it features an 8-inch 24-tooth blade capable of 90-degree cross cuts and 0 to 45-degree bevel cuts. Its compact footprint measures 17 by 15 by 22 inches, making it a practical choice if you need a manageable benchtop cutting tool for basic lumber.
Pros
- 6.7-amp pure copper motor running at 3576 RPM
- Bevel adjustments from 0 to 45 degrees plus 90-degree cross cuts
- Built-in carry handle with a compact 17 by 15-inch base
- Oversized power switch with emergency shut-off cover
Cons
- Small 8-inch blade limits cut depth compared to standard 10-inch saws
- 6.7-amp motor draws less power than typical 15-amp jobsite options
- Product documentation lists inconsistent weight specs of 31.3 and 36 pounds
Good fit if
- You need a compact 8-inch benchtop saw for small DIY woodworking projects.
- You require 0 to 45-degree bevel and 90-degree cross cutting capabilities.
- You want an integrated emergency stop cover and transparent blade guard.
Skip if
- You need the cutting depth and blade selection of a standard 10-inch table saw.
- You require a high-power 15-amp motor for dense hardwoods or heavy framing.
Verdict: EliteEdge 8-Inch 6.7A Portable Table Saw delivers compact 3576 RPM cutting for light DIY and jobsite duties where storage space is tight. It provides essential bevel adjustability and standard safety guards in a small footprint.
Towallmark 8-Inch Portable Table Saw
Best for: portable DIY woodworking and mobile jobsite cutting
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8-inch
- Amperage
- 6.7-Amp
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 16 × 14 × 21 inches
- Weight
- 26.2 pounds
You get a compact jobsite saw powered by a 6.7-amp copper motor running at 3576 RPM. It features an 8-inch, 24-tooth blade capable of 90-degree cross cuts and 0 to 45-degree bevel cuts. Weighing 26.2 pounds with a built-in carry handle, this saw suits DIYers and portable jobsite woodworkers who need manageable transport and dedicated dust collection for small-scale wood cutting and furniture tasks.
Pros
- 6.7-amp pure copper motor delivers 3576 RPM no-load speed
- Blade tilts from 0 to 45 degrees for bevel cutting
- Integrated dust collection system rated up to 98.5% efficiency
- Emergency stop cover over oversized power switch and clear blade guard
Cons
- 8-inch blade diameter provides less cutting depth than 10-inch models
- Compact 14 by 16-inch footprint offers limited surface support for large panels
Good fit if
- You need a 26.2-pound portable saw with an integrated carry handle for transport.
- You want 0 to 45-degree beveling capability paired with a 24-tooth cutting blade.
- You require an emergency off switch cover and transparent guard for workshop safety.
Skip if
- You need the cutting depth and blade options of a standard 10-inch saw.
- You frequently cut large sheet goods requiring wide rip capacity.
Verdict: Towallmark 8-Inch 6.7-Amp Portable Table Saw delivers 3576 RPM cutting performance in a lightweight, mobile package designed for DIY projects and jobsite tasks. Its built-in safety switch and bevel flexibility make it a practical choice for compact workshops.
MERXENG 8-Inch 6.7-Amp Portable Table Saw
Best for: portable DIY woodworking and small cuts
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8-Inch
- Amperage
- 6.7-Amp
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 21.3 × 16.1 × 14.2 inches
- Weight
- 26.3 pounds
The MERXENG 8-inch table saw offers a compact setup for portable cutting tasks. Powered by a 6.7-amp copper motor spinning at 3576 RPM, this tool drives an included 24-tooth blade for 90-degree cross cuts and 0 to 45-degree bevels. Weighing 26.3 pounds with a built-in carry handle, it suits you if you need a lightweight, manageable machine for basic DIY woodworking, trim jobs, or small jobsite projects.
Pros
- Weighs 26.3 pounds with integrated carry handle
- Bevel adjustments from 0 to 45 degrees
- Includes 24-tooth 8-inch blade and transparent guard
- Oversized power switch with emergency shutoff cover
Cons
- Smaller 8-inch blade limits maximum cutting depth compared to 10-inch models
- 6.7-amp motor draws less power than standard 15-amp jobsite saws
Good fit if
- You need a lightweight 26.3-pound saw that is easy to transport
- You make standard cross cuts and bevel cuts up to 45 degrees
- You work on DIY or small woodworking tasks requiring a 6.7-amp motor
Skip if
- You need a full-depth cut provided by a standard 10-inch blade
- You require heavy-duty output exceeding a 6.7-amp rating
Verdict: MERXENG 8-Inch Portable Table Saw provides a compact 6.7-amp cutting platform with 3576 RPM for portable woodworking. Its 26.3-pound weight makes it practical for small-scale DIY tasks that do not require standard 10-inch blade depth.
ExploreHorizon 8-Inch 6.7A Table Saw
Best for: portable DIY cutting and light bevel work
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8"
- Amperage
- 6.7 A
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 16.6 × 12.8 × 15.4 inches
- Weight
- 30.6 pounds
The ExploreHorizon 8-Inch Portable Table Saw pairs a 6.7-amp copper motor with a 3576 RPM no-load speed. It uses an 8-inch, 24-tooth blade capable of 90-degree cross cuts and 0 to 45-degree bevel cuts. Measuring 16.6 by 12.8 by 15.4 inches and equipped with a carry handle, it suits you if you need a compact cutting setup for DIY jobs and light woodworking.
Pros
- 6.7-amp copper motor running at 3576 RPM
- Bevel adjustment from 0° to 45° with height control
- Compact 16.6 x 12.8 x 15.4-inch footprint with carry handle
- Oversized power switch with emergency safety cover
Cons
- Smaller 8-inch blade diameter limits cut depth compared to standard 10-inch saws
- 6.7-amp motor draws less power than full-size 15-amp jobsite models
Good fit if
- You need a lightweight table saw with an integrated carry handle for portable DIY jobs.
- You make angled cuts between 0° and 45° in smaller stock.
- You want physical safety controls including an emergency switch cover and transparent guard.
Skip if
- You require the cut depth and throat capacity of a standard 10-inch blade.
- You cut thick, dense hardwoods that require a 15-amp motor.
Verdict: ExploreHorizon 8-Inch 6.7A Portable Table Saw delivers compact 3576 RPM cutting with adjustable bevel settings for home woodworking. Its 6.7-amp motor and 8-inch blade emphasize easy transport over heavy-duty framing capacity.
Hipicute 8-Inch Portable Table Saw
Best for: portable DIY woodworking and small cuts
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8-inch
- Amperage
- 6.7-Amp
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 23 × 17 × 15 inches
- Weight
- 25.4 pounds
The Hipicute 8-Inch Compact Table Saw runs a 6.7-amp copper motor delivering a 3576 RPM no-load speed. It includes an 8-inch 24-tooth blade, 0-to-45-degree bevel capacity, and an emergency off switch cover. Measuring 23 by 17 by 15 inches, this unit suits you if you need a lightweight, transportable cutting station for DIY wood boards and small jobsite projects.
Pros
- 6.7-amp copper motor spinning at 3576 RPM
- Bevel angle adjusts from 0 to 45 degrees
- Oversized power switch includes emergency shutoff cover
- Integrated carry handle for transport
Cons
- 8-inch blade diameter limits cut depth compared to 10-inch saws
- 6.7-amp motor provides less cutting power than standard 15-amp models
Good fit if
- You need a dedicated 3576 RPM benchtop saw for small DIY boards.
- You want bevel adjustments between 0 and 45 degrees.
- You need a compact footprint measuring under 24 inches long.
Skip if
- You need a full-depth 10-inch blade for thick stock.
- You require a high-power 15-amp motor for heavy commercial cuts.
Verdict: Hipicute 8-Inch Compact Table Saw delivers 3576 RPM cutting and adjustable bevel angles in a compact footprint. It serves DIY woodworking tasks where portability and basic rip or bevel cuts take priority over motor amperage.
GARVEETECH 8-Inch 6.7-Amp Compact Table Saw
Best for: portable DIY and jobsite wood cutting
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8 in
- Amperage
- 6.7Amps
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 15 × 10 × 20 inches
This GARVEETECH unit is an 8-inch compact jobsite table saw built for DIY woodworking. It runs on a 6.7-amp pure copper motor delivering a 3576 RPM no-load speed. At 36 pounds with dimensions of 15 by 10 by 20 inches, it provides easy transport via a built-in handle. You get 90-degree cross cuts and 0 to 45-degree bevels, making it suitable if you need portable cutting capacity.
Pros
- 6.7-amp copper motor delivering 3576 RPM
- Includes 24-tooth 8-inch blade
- Weighs 36 pounds with integrated carry handle
- Bevel adjustment from 0 to 45 degrees
Cons
- Compact 15 by 10-inch table size limits material support
- Lower 6.7-amp draw compared to standard 15-amp table saws
Good fit if
- You need a lightweight 36-pound saw for easy transport.
- You perform bevel cuts between 0 and 45 degrees.
- You have limited workspace requiring a compact tool footprint.
Skip if
- You require a standard 10-inch blade diameter.
- You need a 15-amp motor for heavy-duty timber cutting.
Verdict: GARVEETECH 8-Inch Compact Table Saw delivers 3576 RPM performance in a portable 36-pound frame. It provides essential 0 to 45-degree bevel capability for basic jobsite and DIY cutting tasks.
GarveeTech 8-Inch 6.7-Amp Table Saw
Best for: compact jobsite cutting and DIY woodworking projects
- No-Load Speed
- 3576 RPM (what this guide is about)
- Blade Diameter
- 8 in
- Amperage
- 6.7-Amp
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 16 × 14 × 21 inches
- Weight
- 40 pounds
This GARVEETECH table saw delivers a no-load speed of 3576 RPM via a 6.7-amp copper motor. Built with an 8-inch, 24-tooth blade, it handles cross cuts at 90 degrees and bevels up to 45 degrees. Its compact footprint measuring 16 by 14 by 21 inches suits you if you need portable cutting capability for basic jobsite or DIY woodworking projects.
Pros
- 6.7-amp copper motor running at 3576 RPM
- Bevel cut adjustments from 0 to 45 degrees
- Dust collection system rated up to 98.5% efficiency
- Built-in carry handle on a compact frame
Cons
- 8-inch blade diameter limits cut capacity relative to 10-inch saws
- 6.7-amp motor provides lower output than full-size 15-amp benchtop units
Good fit if
- You need a portable 8-inch saw for light jobsite tasks or DIY builds.
- You want bevel cutting versatility between 0 and 45 degrees.
Skip if
- You require the depth capacity of a standard 10-inch blade.
- You need a higher-amperage motor for heavy lumber processing.
Verdict: GARVEETECH 8-Inch Compact Table Saw provides a 3576 RPM operating speed and bevel versatility in an easily transportable package. It gives you dependable performance for smaller wood-cutting jobs without occupying substantial workshop space.
Specifications side by side
| Spec | ExploreHorizon 8-Inch Compact Table Saw | TrailBlaze 8-Inch 6.7-Amp Table Saw | PioneerWorks 8-Inch Portable Table Saw | SierraSquad 8-Inch Portable Table Saw | PioneerWorks 8-Inch Portable Table Saw | PioneerWorks 8-Inch 6.7-Amp Table Saw | EliteEdge 8-Inch 6.7-Amp Compact Table Saw | Garvee 8-Inch 6.7-Amp Table Saw | EliteEdge 8-Inch 6.7-Amp Compact Table Saw | Towallmark 8-Inch Portable Table Saw | MERXENG 8-Inch 6.7-Amp Portable Table Saw | ExploreHorizon 8-Inch 6.7A Table Saw | Hipicute 8-Inch Portable Table Saw | GARVEETECH 8-Inch 6.7-Amp Compact Table Saw | GarveeTech 8-Inch 6.7-Amp Table Saw |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Diameter | 8" | 8-Inch | 8-inch | 8-inch | 8" | 8" | 8 in | 8 in | 8" | 8-inch | 8-Inch | 8" | 8-inch | 8 in | 8 in |
| Amperage | 6.7 A | 6.7-Amp | 6.7-Amp | 6.7-Amp | 6.7 A | 6.7 A | 6.7-Amp | 6.7-Amp | 6.7 A | 6.7-Amp | 6.7-Amp | 6.7 A | 6.7-Amp | 6.7Amps | 6.7-Amp |
| No-Load Speed | 3,576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576RPM | 3576 RPM | 3576 RPM |
| Intended Use | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects |
| Dimensions | 18 × 15 × 22 inches | 14 × 14 × 13 inches | 14 × 13.5 × 13 inches | 17.7 × 17.7 × 17.7 inches | 14 × 13.5 × 13 inches | 14 × 13.5 × 13 inches | 17 × 14 × 22 inches | 12.8 × 14.9 × 16.8 inches | 17 × 15 × 22 inches | 16 × 14 × 21 inches | 21.3 × 16.1 × 14.2 inches | 16.6 × 12.8 × 15.4 inches | 23 × 17 × 15 inches | 15 × 10 × 20 inches | 16 × 14 × 21 inches |
| Weight | 30.6 pounds | 31.3 pounds | 36 pounds | 31.3 pounds | 15 pounds | 15 pounds | 50.3 pounds | 30 pounds | 31.3 pounds | 26.2 pounds | 26.3 pounds | 30.6 pounds | 25.4 pounds | not specified | 40 pounds |
| Color | Black | Orange | Orange | not specified | Grey | Orange | Orange | Grey | Grey | Orange | Orange | Black | Black | Grey | Grey |
| Model | zj1g3zvcw84a-RvGp0q71w4I | zsr6R0MGQUbXgHHPK7ua9lpAX4r | 01 | PPS_33FH7BTRAYIBXPP | 01 | 01 | FZBwFvFhwc3y0m1u46ODqAFT3B | KJ-SAW-1 | FZBwFvFhwc3y0m1u46ODqAFT3B | 01 | sfp-LY-r6R0MGQUbXgHHPK7ua9lpASpxT14K | zj1g3zvcw84a-RvGp0q71w4I | no-led--kd3 | QQVUW53ooDcpMJ4g7NTeXgR59F | QQVUW53ooDcpMJ4g7NTeXgR59F |
| Size | not specified | not specified | not specified | not specified | not specified | not specified | 7 Fork (Fit 72" Bucket) | not specified | not specified | not specified | not specified | 8.5" 2000W | not specified | not specified | not specified |
Is a 3576 RPM Table Saw Worth It?
A no-load speed of 3576 RPM spins an 8-inch blade fast enough for basic bevel cuts, crosscuts, and routine DIY trimming. Across these models, manufacturers pair this specific speed exclusively with 6.7-amp motors. In daily workshop use, this setup delivers controlled cutting action for small boards and light jobsite materials without drawing high amperage. It suits compact benchtop trimming where portability matters more than deep rip cuts. If your work involves standard home maintenance and small woodworking projects, this rotational speed provides adequate cutting capability in a lightweight tool footprint.
Worth it if
- You make basic crosscuts and 0 to 45-degree bevel cuts on DIY wood projects.
- You need a mobile cutting tool that pairs 3576 RPM with a low-draw 6.7-amp motor.
Skip it if
- You require standard 10-inch blade cutting depth for framing lumber.
- You need higher motor power than 6.7 amps for continuous heavy-duty stock.
How We Picked These Saws
We chose these 15 table saws by examining published specifications for a no-load speed of 3576 RPM. A tool is included when its product listing lists this operating speed in the title or feature details. Only one size or model variant per product family is shown. We do not physically handle or test the tools; every detail comes directly from published manufacturer specifications.
Products are ordered with in-stock items first, then by Amazon sales rank, placing better-selling models higher. You can use listed specifications to compare options, including the 8-inch blade diameter, 6.7-amp motor rating, tool weight, and overall dimensions to find the right saw for your workspace.
Choosing the Right 3576 RPM Table Saw
-
Check Bevel Angle Capacity
Verify the bevel adjustment range before buying. Several saws in this category provide a 0 to 45 degree bevel setting for angled cuts. If you cut baseboards, trim, or basic joinery, you need quick tilt adjustments with clear angle markings. Saws like the PioneerWorks 8-Inch Portable Table Saw feature this standard 0 to 45 degree range. Ensure the locking lever holds firmly at common tilt angles. Buyers cutting only square 90-degree stock can bypass advanced bevel setups, but versatile home workshops will benefit from confirmed bevel adjustability on the spec sheet.
-
Inspect Dust Capture Systems
Review the dust management setup on the saw. High-speed spinning blades produce fine airborne particles quickly in enclosed garages or jobsite rooms. Saws such as the TrailBlaze 8-Inch 6.7-Amp Table Saw specify an integrated particulate capture system to help control debris. Check if the saw includes a dedicated port or shroud surrounding the blade. If you work primarily indoors, an efficient particulate capture design keeps your cutting line visible and reduces cleanup time. For outdoor rough cutting, basic blade guard covers may prove sufficient for your daily work.
-
Measure Available Benchtop Space
Check the external length and width dimensions before selecting a tool. Compact saws range significantly in physical footprint. For instance, the GARVEETECH 8-Inch 6.7-Amp Compact Table Saw measures 10 inches wide by 15 inches long, occupying minimal workbench real estate. Other units extend past 20 inches in length, requiring deeper staging tables. If your workspace is a small shed or mobile vehicle shelf, prioritize narrow footprint dimensions. Match the listed tool dimensions against your dedicated bench area to make sure you have enough infeed and outfeed clearance around the tool perimeter.
-
Check Blade Tooth Configuration
Examine the installed blade specifications before committing to a saw. Saws like the EliteEdge 8-Inch 6.7-Amp Compact Table Saw include a 24-tooth blade. A 24-tooth count on an 8-inch blade is configured primarily for general rip cuts and fast sizing cuts through lumber. If you plan to cut delicate finish trim, plywood veneers, or composite paneling, you might need a higher tooth count to prevent grain tearout. Check whether the standard blade matches your intended material, or factor in the need for a secondary fine-finish blade replacement for clean, tear-free cuts.
-
Confirm Built-In Safety Controls
Examine the motor controls and integrated safety features. Reliable switches help you cut power rapidly when a piece of stock binds against the fence. The Towallmark 8-Inch Portable Table Saw notes a built-in safety switch for fast, accessible shutoff during operation. Review the position and style of the power toggle on each saw frame. You want a switch that is easy to reach without shifting your balance while stabilizing workpieces. Saws featuring recessed or guarded switches prevent accidental startups, making them a sensible choice for busy home garages or shared workspaces.
-
Review Motor Winding Specifications
Inspect the listed motor specifications and winding materials. Some manufacturers explicitly note copper motor construction, as seen on the SierraSquad 8-Inch Portable Table Saw. Copper windings generally handle thermal stress and electrical conductivity better than alternative windings during continuous cuts. If you only make occasional quick crosscuts in thin pine, standard motor windings are adequate. If you frequently cut denser hardwoods or work across lengthy weekend sessions, check the product details for copper motor construction. Choosing durable winding materials helps maintain consistent power delivery through repetitive cutting cycles.
Frequently asked questions
What types of woodworking tasks can you perform with a 3576 RPM table saw?
A 3576 RPM table saw is designed for DIY wood cutting, crosscuts, and basic bevel cuts. These units feature 8-inch blades and 6.7-amp motors, which provide sufficient power for trimming boards, sizing smaller craft pieces, and light jobsite projects. They are built for compact portable cutting rather than processing heavy framing lumber or thick hardwoods.
What blade size is standard for table saws running at 3576 RPM?
All listed saws running at 3576 RPM use an 8-inch blade diameter. An 8-inch blade allows manufacturers to keep the overall tool frame compact and lightweight, as seen across the 15 models. This blade diameter supports routine DIY rip cuts, crosscuts, and angled cuts while operating smoothly on a 6.7-amp motor setup.
How much bevel angle adjustment do 3576 RPM table saws offer?
Most 3576 RPM table saws provide a bevel adjustment range from 0 to 45 degrees. Models such as the PioneerWorks, SierraSquad, and EliteEdge feature this angle flexibility for cutting compound joints, chamfers, or bevel edges on small boards. You make adjustments directly on the tool frame to shift the 8-inch blade between standard vertical and angled cutting positions.
What electrical circuit do you need for a 6.7-amp table saw?
You can run these 6.7-amp table saws on a standard 120-volt household circuit rated for 15 amps. Because the 6.7-amp draw is relatively low compared to full-sized 15-amp cabinet saws, you do not need dedicated high-amperage workshop outlets. This low power demand makes them convenient for home garages, basements, and jobsite extension cords.
What is the heaviest 3576 RPM table saw on this list?
The heaviest model on this list is the EliteEdge 8-Inch Table Saw, weighing 50.3 pounds. In contrast, smaller portable options like the PioneerWorks weigh as little as 15 pounds. The additional mass on the 50.3-pound EliteEdge helps stabilize the unit on a workbench during operation, though it reduces transport convenience.
Do 3576 RPM table saws come with dust collection features?
Yes, select models include built-in dust handling components. For example, the TrailBlaze 8-Inch Portable Table Saw features an integrated particulate capture system paired with its 800-watt motor, while the Garvee saw emphasizes high dust efficiency. These ports help channel sawdust away from your cut line and keep small workshop spaces cleaner during DIY woodworking sessions.
How portable are 3576 RPM table saws for mobile jobsite use?
These saws are highly portable, with frame weights ranging from 15 pounds to 50.3 pounds. Models like the Hipicute weigh 25.4 pounds, and the Towallmark weighs 26.2 pounds, making them easy to carry to job locations. Their compact dimensions, typically around 14 to 17 inches wide, allow you to transport them in a vehicle trunk without difficulty.