Best Table Saws with 6.7 Amp in 2026: 15 Picks Ranked by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Choosing among the best table saws with 6 7 amp motors comes down to tool dimensions and speed. We compared 15 models strictly using the specifications published on their listings to see how they match up. The ExploreHorizon 8-Inch Compact Table Saw takes the top spot because its 3,576 RPM copper motor and 30.6-pound weight deliver capable cutting in a portable frame.
This guide helps you decide which saw fits your workshop needs based on published dimensions, no-load speeds, and machine weight.
Quick picks
The best fit for you
- You want the top-ranked saw for DIY projects ExploreHorizon 8-Inch Compact Table Saw It combines a 3,576 RPM copper motor with a 30.6-pound frame and 0 to 45-degree bevel cutting.
- You need integrated dust capture for cleaner jobsite cuts TrailBlaze 8-Inch 6.7-Amp Table Saw It features high dust capture alongside an 800W copper motor running at 3,576 RPM.
- You need the lightest option for maximum carrying convenience PioneerWorks 8-Inch Portable Table Saw At 15 pounds, it provides the lowest overall weight on the list.
- You need the narrowest profile for tight bench spaces GARVEETECH 8-Inch 6.7-Amp Compact Table Saw Its 10-inch width gives you the slimmest benchtop profile on the list.
Our 15 picks
ExploreHorizon 8-Inch Compact Table Saw
Best for: portable DIY woodworking and jobsite cuts
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8"
- No-Load Speed
- 3,576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 18 × 15 × 22 inches
- Weight
- 30.6 pounds
The ExploreHorizon 8-Inch Table Saw provides a 6.7-amp copper motor paired with a 24-tooth blade spinning at 3,576 RPM. Measuring 18 by 15 by 22 inches, you get bevel adjustments from 0 to 45 degrees alongside 90-degree cross cuts. A transparent blade guard and emergency shut-off cover protect you during operation. This tool suits you if you tackle jobsite or DIY woodworking projects requiring a portable benchtop saw.
Pros
- 6.7-amp copper motor with 3,576 RPM no-load speed
- Bevel capacity from 0 to 45 degrees
- Oversized power switch with emergency off safety cover
- Built-in carry handle for transport
Cons
- 8-inch blade capacity is smaller than standard 10-inch saws
- No rip fence or miter gauge listed in specifications
Good fit if
- You need a compact 8-inch table saw with a built-in carry handle.
- You make 90-degree cross cuts and 0-to-45-degree bevel cuts.
Skip if
- You require a larger 10-inch blade for deeper cutting tasks.
- You need a table saw that includes a stand.
Verdict: ExploreHorizon 8-Inch 6.7-Amp Table Saw combines a 3,576 RPM copper motor with bevel cutting from 0 to 45 degrees. It provides portable cutting for DIY tasks where compact benchtop dimensions matter most.
TrailBlaze 8-Inch 6.7-Amp Table Saw
Best for: clean jobsite cuts in small workspaces
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8-Inch
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 14 × 14 × 13 inches
- Weight
- 31.3 pounds
The TrailBlaze 8-inch table saw runs on an 800-watt, 6.7-amp pure copper motor spinning at 3576 RPM. It features an integrated 98.5 percent particulate collection system, an oversized urgent-off switch, and a transparent blade guard. You get 0 to 45 degree bevel capacity and an included 24-tooth blade in a compact 14 by 14 inch footprint. It suits DIY woodworkers needing reliable cutting power in tight spaces.
Pros
- 800W pure copper motor running at 3576 RPM
- Dust collection system rated at 98.5% particulate removal
- Bevel angle adjusts from 0° to 45°
- Oversized urgent-off switch and transparent blade guard
Cons
- Compact 14 by 14 inch table limits support for wide boards
- 8-inch blade diameter limits cut depth versus standard 10-inch saws
Good fit if
- You need built-in 98.5% particulate collection for a cleaner workspace.
- You work in tight locations requiring a compact 14-inch footprint.
- You want 0 to 45 degree bevel adjustments on an 8-inch platform.
Skip if
- You require the deeper cut capacity provided by a 10-inch saw.
- You regularly rip large sheet goods requiring a wide table top.
Verdict: TrailBlaze 8-Inch 6.7-Amp Table Saw combines high dust capture with an 800W copper motor for precise bevel cuts in small shops. Its compact build delivers solid safety and clean operation without taking up permanent workspace.
PioneerWorks 8-Inch Portable Table Saw
Best for: compact jobsite transport and small DIY projects
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8-inch
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 14 × 13.5 × 13 inches
- Weight
- 36 pounds
The PioneerWorks 8-Inch Compact Table Saw runs on a 6.7-amp copper motor delivering 3576 RPM. It features an 8-inch 24T blade with 0 to 45 degree bevel adjustments and adjustable cutting depth. At 36 pounds with integrated carry handles and compact dimensions of 14 by 13.5 by 13 inches, this machine suits you if you need a portable tool for basic jobsite ripping and DIY woodworking.
Pros
- 6.7-amp pure copper motor reaching 3576 RPM
- 0 to 45 degree bevel angle adjustment
- Weighs 36 pounds with built-in carry handle
- Emergency stop cover on oversized power switch
Cons
- Small 14 by 13.5 inch footprint limits support for wide stock
- Uses an 8-inch blade rather than a standard 10-inch size
Good fit if
- You need a 36-pound machine that is easy to carry and store.
- You cut small boards and craft pieces requiring up to 45-degree bevels.
Skip if
- You need to break down large sheet goods or thick framing lumber.
- You require standard 10-inch table saw blade compatibility.
Verdict: PioneerWorks 8-Inch Compact Table Saw provides a 6.7-amp motor and basic bevel flexibility in a portable 36-pound footprint. It gives you direct control for small jobsite cuts and transportable DIY tasks.
SierraSquad 8-Inch Portable Table Saw
Best for: portable DIY woodworking and basic jobsite cuts
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8-inch
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 17.7 × 17.7 × 17.7 inches
- Weight
- 31.3 pounds
The SierraSquad 8-inch table saw runs on a 6.7-amp copper motor delivering a no-load speed of 3576 RPM. Designed for DIY projects and jobsite tasks, it includes a 24-tooth blade, a built-in carry handle, and a 17.7-inch cubic footprint weighing 31.3 pounds. With 0 to 45-degree bevel adjustments and integrated dust collection, this compact unit suits you if you need basic wood-cutting capability in a portable form.
Pros
- 6.7-amp copper motor delivers up to 3576 RPM no-load speed
- Compact 17.7-inch square profile with built-in carry handle
- Supports 90-degree cuts and bevel cuts from 0 to 45 degrees
- Features transparent blade guard and oversized power switch
Cons
- 8-inch blade diameter offers less cutting depth than standard 10-inch saws
- No included stand or legs for freestanding jobsite setup
Good fit if
- You need a compact 8-inch table saw for basic DIY and jobsite cuts.
- You want a lightweight 31.3-pound tool with a handle for easy transport.
- You require bevel capability between 0 and 45 degrees.
Skip if
- You need a full-size 10-inch table saw for deeper wood cuts.
- You require a wheeled stand for jobsite mobility.
Verdict: SierraSquad 8-Inch 6.7-Amp Portable Table Saw offers practical cutting power and portability for DIY tasks with its compact 31.3-pound frame. Its 3576 RPM motor and 0 to 45-degree bevel range cover essential basic cuts.
PioneerWorks 8-Inch Portable Table Saw
Best for: portable DIY woodworking and small cuts
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8"
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 14 × 13.5 × 13 inches
- Weight
- 15 pounds
The PioneerWorks 8-Inch Compact Table Saw gives you a portable cutting setup powered by a 6.7-amp pure copper motor. It runs an 8-inch, 24-tooth blade at 3,576 RPM with 0 to 45-degree bevel capacity. Its 14 by 13.5 by 13-inch footprint and carry handle suit DIY projects and basic jobsite cuts where workspace remains limited.
Pros
- 6.7-amp pure copper motor delivers up to 3,576 RPM
- Blade bevel adjusts from 0 to 45 degrees
- Oversized power switch includes an emergency off safety cover
- Compact 14 by 13.5 by 13-inch frame with integrated carry handle
Cons
- 8-inch blade provides less cutting depth than standard 10-inch saws
- No stand or mounting legs included in specifications
- 6.7-amp motor capacity limits heavy-duty timber cutting
Good fit if
- You need a compact 8-inch saw for DIY woodworking projects.
- You want 0 to 45-degree bevel adjustment with an emergency power shutoff.
- You require an easily portable unit with a built-in carry handle.
Skip if
- You need a full-depth 10-inch saw blade for thicker stock.
- You cut heavy dimensional lumber requiring higher-amperage motors.
Verdict: PioneerWorks 8-Inch Compact Table Saw delivers 3,576 RPM cutting speeds and 0 to 45-degree beveling in an ultra-compact package. It provides straightforward cutting for basic woodworking tasks where portability takes priority.
PioneerWorks 8-Inch 6.7-Amp Table Saw
Best for: portable DIY cutting and light jobsite tasks
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8"
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 14 × 13.5 × 13 inches
- Weight
- 15 pounds
This PioneerWorks bench saw runs on a 6.7-amp pure copper motor turning an 8-inch 24-tooth blade at 3,576 RPM. You get 90-degree cross cuts alongside 0- to 45-degree bevel adjustment. Measuring 14 by 13.5 by 13 inches, it includes a transparent blade guard, an emergency-off switch cover, and an integrated carry handle. It suits you if you need a compact, portable saw for light jobsite and DIY woodcutting projects.
Pros
- 6.7-amp pure copper motor reaching 3,576 RPM
- Bevel adjustments from 0° to 45° plus 90° cross cutting
- Transparent blade guard and switch with emergency off cover
- Integrated carry handle for transport
Cons
- 8-inch blade provides less maximum cutting depth than 10-inch models
- 6.7-amp rating offers lower cutting power than standard 15-amp saws
Good fit if
- You need a compact 8-inch saw with a 6.7-amp motor for DIY projects.
- You want bevel adjustment from 0° to 45° in a portable format.
- You need built-in carry handles for easy transport.
Skip if
- You require a 10-inch blade capacity for thick lumber.
- You cut dense hardwoods requiring more than 6.7 amps of power.
Verdict: PioneerWorks 8-Inch 6.7-Amp Portable Table Saw delivers 3,576 RPM and 0° to 45° bevel capability in a compact footprint. It provides essential cutting specs and safety controls for small-scale DIY and jobsite tasks.
EliteEdge 8-Inch 6.7-Amp Compact Table Saw
Best for: compact DIY and jobsite wood cutting
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8 in
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 17 × 14 × 22 inches
- Weight
- 50.3 pounds
This EliteEdge compact table saw runs on a 6.7-amp copper motor paired with an 8-inch 24-tooth blade. It spins at 3,576 RPM without a load and supports cuts at 90 degrees as well as bevels from 0 to 45 degrees. The machine measures 17 by 14 by 22 inches and includes an emergency off switch cover. It fits your workspace if you tackle small DIY woodworking and jobsite board cutting.
Pros
- 6.7-amp copper motor delivers 3,576 RPM no-load speed
- Bevel adjustments range from 0 to 45 degrees
- Emergency-off switch cover and transparent blade guard
- Includes 8-inch 24-tooth cutting blade
Cons
- Uses an 8-inch blade diameter rather than a standard 10-inch size
- No-load speed is limited to 3,576 RPM
Good fit if
- You need a compact 8-inch saw for basic DIY woodworking cuts.
- You require 0 to 45-degree bevel capability on a 6.7-amp motor.
Skip if
- You require a larger 10-inch blade for deeper cutting capacity.
- You need motor speeds higher than 3,576 RPM.
Verdict: EliteEdge 8-Inch 6.7-Amp Compact Table Saw delivers 3,576 RPM for bevel and cross cuts in an 8-inch footprint. It provides essential safety guards and 0-45 degree beveling for basic DIY and jobsite tasks.
Garvee 8-Inch 6.7-Amp Table Saw
Best for: compact DIY woodworking and basic board cutting
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8 in
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 12.8 × 14.9 × 16.8 inches
- Weight
- 30 pounds
This compact saw runs on a 6.7-amp copper motor paired with an 8-inch 24-tooth blade spinning up to 3576 RPM. You get 90-degree cross cuts and 0 to 45-degree bevel adjustments in a frame measuring 12.8 by 14.9 by 16.8 inches. An integrated dust collection system and transparent blade guard support clean cutting. It suits your DIY woodworking and board cutting tasks when compact dimensions matter.
Pros
- 6.7-amp pure copper motor delivers up to 3576 RPM
- Blade tilts from 0 to 45 degrees for bevel cuts
- Includes a 24-tooth 8-inch blade and transparent guard
- Compact footprint measuring 12.8 by 14.9 by 16.8 inches
Cons
- Smaller 8-inch blade provides less cut depth than 10-inch models
- No stand or folding legs listed in specifications
Good fit if
- You need a compact saw with a carry handle for DIY wood cutting.
- You make basic bevel cuts between 0 and 45 degrees.
Skip if
- You require a standard 10-inch blade for deeper cutting capacity.
- You need an included wheeled stand for jobsite mobility.
Verdict: Garvee 8-Inch 6.7-Amp Table Saw provides a compact footprint and 3576 RPM motor speed for light-duty woodwork. It gives you basic bevel and rip capabilities without taking up permanent bench space.
EliteEdge 8-Inch 6.7-Amp Compact Table Saw
Best for: portable jobsite and DIY wood cutting
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8"
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 17 × 15 × 22 inches
- Weight
- 31.3 pounds
The EliteEdge 8-Inch Compact Table Saw provides a 6.7-amp copper motor delivering up to 3576 RPM. It carries an 8-inch, 24-tooth blade capable of 90-degree cuts and 0- to 45-degree bevels. Weighing 31.3 pounds with dimensions of 17 by 15 by 22 inches, this unit includes an integrated carry handle and an oversized emergency switch. It suits you if you need a transportable setup for general jobsite tasks and DIY woodworking.
Pros
- 6.7-amp copper motor turns an 8-inch blade at 3576 RPM
- 0 to 45-degree bevel adjustment with blade height control
- Oversized power switch equipped with an emergency off cover
- Integrated carry handle on a 31.3-pound frame
Cons
- Uses an 8-inch blade diameter rather than a standard 10-inch size
- Stock 24-tooth blade is intended for rough cuts rather than fine finish work
Good fit if
- You need a 6.7-amp jobsite saw that weighs roughly 31 pounds for transport
- You make basic 90-degree cuts and 0- to 45-degree bevel cuts on DIY wood projects
Skip if
- You require a larger 10-inch blade for cutting thicker timber
- You want a machine that includes a dedicated floor stand
Verdict: EliteEdge 8-Inch 6.7-Amp Compact Table Saw delivers 3576 RPM cutting performance in a portable 31.3-pound package. It gives you dependable 6.7-amp power for DIY cuts without excess bulk.
Towallmark 8-Inch Portable Table Saw
Best for: compact DIY woodworking and basic bevel cuts
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8-inch
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 16 × 14 × 21 inches
- Weight
- 26.2 pounds
This compact benchtop table saw features a 6.7-amp copper motor paired with an 8-inch, 24-tooth blade spinning at 3576 RPM. You get 90-degree cross-cutting and bevel capability from 0 to 45 degrees, plus an oversized emergency stop switch. Measuring 16 by 14 by 21 inches and featuring a carry handle, it suits woodworkers and DIYers who require basic board cutting in small spaces.
Pros
- 6.7-amp pure copper motor delivering 3576 RPM
- Adjustable blade angle supporting 0 to 45 degree bevel cuts
- Oversized power switch with emergency off cover
- Built-in carry handle for jobsite transport
Cons
- Smaller 8-inch blade diameter limits maximum cutting depth compared to 10-inch models
- Rip fence dimensions and table extension specs are not provided
Good fit if
- You need a compact saw with a carry handle for easy transport and storage.
- You want an 8-inch saw capable of 0 to 45 degree bevel cuts for DIY projects.
Skip if
- You require a full-sized 10-inch blade for cutting thick lumber.
- You need a motor larger than 6.7 amps for heavy-duty commercial ripping.
Verdict: Towallmark 8-Inch Portable Table Saw provides a 6.7-amp motor and 0 to 45-degree bevel adjustments in a compact profile. It handles standard DIY wood sizing where carrying convenience and basic safety covers are required.
MERXENG 8-Inch 6.7-Amp Portable Table Saw
Best for: lightweight jobsite and DIY woodworking cuts
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8-Inch
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 21.3 × 16.1 × 14.2 inches
- Weight
- 26.3 pounds
The MERXENG 8-Inch 6.7-Amp Portable Table Saw gives you a dedicated jobsite cutting setup in a 26.3-pound frame. Its 6.7-amp copper motor spins an 8-inch 24-tooth blade up to 3576 RPM for crosscuts and 0 to 45-degree bevels. A built-in carry handle and integrated safety switches keep transport and operation simple. It suits you if you need a lightweight benchtop unit for standard jobsite trim work and DIY woodworking.
Pros
- 6.7-amp copper motor delivers up to 3576 RPM
- Weighs 26.3 pounds with a built-in carry handle
- 0° to 45° bevel adjustment and 90° cross-cutting support
- 98.5% rated dust collection efficiency
- Emergency off safety switch cover and transparent blade guard
Cons
- Top rotational speed is limited to 3576 RPM
- 8-inch blade diameter limits depth of cut compared to 10-inch saws
Good fit if
- You need a portable saw that weighs under 30 pounds.
- You make basic 90-degree rips and 0-to-45-degree bevel cuts.
- You want an integrated emergency power shutoff switch.
Skip if
- You require a full-depth 10-inch blade for thick timber.
- You need a blade speed higher than 3576 RPM.
Verdict: MERXENG 8-Inch 6.7-Amp Portable Table Saw balances a 26.3-pound portable footprint with a 3576 RPM copper motor for light jobsite duty. It provides essential 0-to-45-degree angle adjustments alongside built-in safety controls for small-scale woodworking.
ExploreHorizon 8-Inch 6.7A Table Saw
Best for: portable jobsite cutting and DIY woodworking
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8"
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 16.6 × 12.8 × 15.4 inches
- Weight
- 30.6 pounds
This ExploreHorizon table saw features a 6.7-amp copper motor paired with an 8-inch, 24-tooth blade operating at 3,576 RPM. It provides 90-degree cross cuts and bevel cuts between 0 and 45 degrees, alongside an emergency-off switch cover and integrated carry handle. Measuring 16.6 by 12.8 by 15.4 inches, it gives you a compact setup designed for mobile jobsite tasks and home DIY woodwork.
Pros
- 6.7-amp pure copper motor reaching 3,576 RPM
- Bevel adjustment allows cuts from 0 to 45 degrees
- Emergency-off safety switch cover and clear blade guard
- Integrated carry handle with compact footprint
Cons
- 8-inch blade diameter limits cut depth compared to 10-inch saws
- No stand or folding legs included in specifications
Good fit if
- You need a portable 6.7-amp saw with a carry handle for small workspaces.
- You require bevel angle adjustment between 0 and 45 degrees for DIY projects.
Skip if
- You need a standard 10-inch blade for cutting thicker lumber stock.
- You prefer a table saw with an included floor stand.
Verdict: ExploreHorizon 8-Inch 6.7A Table Saw delivers 3,576 RPM cutting performance and 0 to 45-degree bevel flexibility in a portable frame. It offers practical utility if you prioritize compact transport over larger blade capacity.
Hipicute 8-Inch Portable Table Saw
Best for: portable DIY woodworking and small cuts
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8-inch
- No-Load Speed
- 3576RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 23 × 17 × 15 inches
- Weight
- 25.4 pounds
This Hipicute table saw pairs a 6.7-amp pure copper motor with an 8-inch, 24-tooth blade. It delivers an unloaded speed of 3576 RPM and provides bevel cuts from 0 to 45 degrees. The compact 23 by 17 by 15-inch footprint and integrated carry handle make it practical if you need a lightweight, dedicated saw for small DIY woodworking projects or basic jobsite crosscuts.
Pros
- 6.7-amp pure copper motor reaching 3576 RPM
- 0° to 45° bevel angle adjustment for angled cuts
- Compact footprint measuring 23 by 17 by 15 inches
- Emergency off switch cover and transparent blade guard
Cons
- 8-inch blade diameter limits cutting depth compared to standard 10-inch saws
- No stand or folding legs listed in base specifications
Good fit if
- You need a compact 8-inch saw for light DIY cuts and bevels up to 45 degrees.
- You want an integrated carry handle for moving between work areas.
Skip if
- You require a full-size 10-inch blade for cutting thicker lumber.
- You need a dedicated floor stand included in the package.
Verdict: Hipicute 8-Inch Portable Table Saw delivers compact 6.7-amp cutting power and 45-degree bevel flexibility for small-shop and mobile DIY tasks.
GARVEETECH 8-Inch 6.7-Amp Compact Table Saw
Best for: portable DIY cutting and light jobsite projects
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8 in
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 15 × 10 × 20 inches
This compact table saw from GARVEETECH features a 6.7-amp pure copper motor turning an 8-inch, 24-tooth blade at 3576 RPM. At 36 pounds with an integrated carry handle, it provides portable cutting capacity for DIY woodworking and jobsite tasks. You get 90-degree cross cuts and 0- to 45-degree bevel angles, along with an oversized power switch equipped with an emergency off cover.
Pros
- 6.7-amp pure copper motor delivering 3576 RPM no-load speed
- Weighs 36 pounds with a built-in carry handle for transport
- Adjustable blade supports 90-degree cross cuts and 0 to 45-degree bevels
- Oversized power switch with emergency off safety cover
Cons
- Uses an 8-inch blade rather than a standard 10-inch size
- Compact 15 by 10-inch footprint provides limited support for wide workpieces
Good fit if
- You need a portable 36-pound saw with a built-in handle for moving between workspaces.
- You want 0 to 45-degree bevel cutting for compact DIY woodwork.
Skip if
- You require a standard 10-inch blade for larger cutting depths.
- You regularly work with large sheet goods requiring expansive table support.
Verdict: GARVEETECH 8-Inch 6.7-Amp Compact Table Saw delivers 3576 RPM cutting performance in a lightweight 36-pound package. It suits light jobsite tasks and home woodworking where portability and basic bevel adjustments are prioritized.
GarveeTech 8-Inch 6.7-Amp Table Saw
Best for: compact DIY woodworking and jobsite cross cuts
- Amperage
- 6.7 Amp (what this guide is about)
- Blade Diameter
- 8 in
- No-Load Speed
- 3576 RPM
- Intended Use
- Jobsite, DIY Projects
- Dimensions
- 16 × 14 × 21 inches
- Weight
- 40 pounds
This GarveeTech compact jobsite table saw runs on a 6.7-amp pure copper motor turning an 8-inch, 24-tooth blade at 3576 RPM. You get adjustable blade height, a 0 to 45 degree bevel angle range, and a built-in dust collection system rated at 98.5 percent efficiency. Measuring 16 by 14 by 21 inches, it provides portable cutting capacity for your home workshop, outdoor builds, and basic DIY woodworking projects.
Pros
- Pure copper 6.7-amp motor running at 3576 RPM
- Bevel adjustments from 0 to 45 degrees plus 90-degree cross cuts
- Dust collection system rated at 98.5 percent efficiency
- Oversized power switch with emergency off safety cover
Cons
- Uses an 8-inch blade diameter rather than larger standard sizes
- Total weight reaches 40 pounds
Good fit if
- You need a 6.7-amp saw with bevel adjustments between 0 and 45 degrees.
- You want an 8-inch portable saw equipped with a carry handle for DIY tasks.
- You prioritize high dust extraction with a 98.5 percent collection rate.
Skip if
- You require a saw blade larger than 8 inches for cutting thick stock.
- You need a cutting speed greater than 3576 RPM.
Verdict: GarveeTech 8-Inch 6.7-Amp Table Saw balances portable dimensions with a 3576 RPM copper motor and 0 to 45 degree bevel flexibility. It delivers dependable cutting performance for workshop jobs and mobile DIY projects.
Specifications side by side
| Spec | ExploreHorizon 8-Inch Compact Table Saw | TrailBlaze 8-Inch 6.7-Amp Table Saw | PioneerWorks 8-Inch Portable Table Saw | SierraSquad 8-Inch Portable Table Saw | PioneerWorks 8-Inch Portable Table Saw | PioneerWorks 8-Inch 6.7-Amp Table Saw | EliteEdge 8-Inch 6.7-Amp Compact Table Saw | Garvee 8-Inch 6.7-Amp Table Saw | EliteEdge 8-Inch 6.7-Amp Compact Table Saw | Towallmark 8-Inch Portable Table Saw | MERXENG 8-Inch 6.7-Amp Portable Table Saw | ExploreHorizon 8-Inch 6.7A Table Saw | Hipicute 8-Inch Portable Table Saw | GARVEETECH 8-Inch 6.7-Amp Compact Table Saw | GarveeTech 8-Inch 6.7-Amp Table Saw |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Diameter | 8" | 8-Inch | 8-inch | 8-inch | 8" | 8" | 8 in | 8 in | 8" | 8-inch | 8-Inch | 8" | 8-inch | 8 in | 8 in |
| Amperage | 6.7 A | 6.7-Amp | 6.7-Amp | 6.7-Amp | 6.7 A | 6.7 A | 6.7-Amp | 6.7-Amp | 6.7 A | 6.7-Amp | 6.7-Amp | 6.7 A | 6.7-Amp | 6.7Amps | 6.7-Amp |
| No-Load Speed | 3,576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576 RPM | 3576RPM | 3576 RPM | 3576 RPM |
| Intended Use | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects | Jobsite, DIY Projects |
| Dimensions | 18 × 15 × 22 inches | 14 × 14 × 13 inches | 14 × 13.5 × 13 inches | 17.7 × 17.7 × 17.7 inches | 14 × 13.5 × 13 inches | 14 × 13.5 × 13 inches | 17 × 14 × 22 inches | 12.8 × 14.9 × 16.8 inches | 17 × 15 × 22 inches | 16 × 14 × 21 inches | 21.3 × 16.1 × 14.2 inches | 16.6 × 12.8 × 15.4 inches | 23 × 17 × 15 inches | 15 × 10 × 20 inches | 16 × 14 × 21 inches |
| Weight | 30.6 pounds | 31.3 pounds | 36 pounds | 31.3 pounds | 15 pounds | 15 pounds | 50.3 pounds | 30 pounds | 31.3 pounds | 26.2 pounds | 26.3 pounds | 30.6 pounds | 25.4 pounds | not specified | 40 pounds |
| Color | Black | Orange | Orange | not specified | Grey | Orange | Orange | Grey | Grey | Orange | Orange | Black | Black | Grey | Grey |
| Model | zj1g3zvcw84a-RvGp0q71w4I | zsr6R0MGQUbXgHHPK7ua9lpAX4r | 01 | PPS_33FH7BTRAYIBXPP | 01 | 01 | FZBwFvFhwc3y0m1u46ODqAFT3B | KJ-SAW-1 | FZBwFvFhwc3y0m1u46ODqAFT3B | 01 | sfp-LY-r6R0MGQUbXgHHPK7ua9lpASpxT14K | zj1g3zvcw84a-RvGp0q71w4I | no-led--kd3 | QQVUW53ooDcpMJ4g7NTeXgR59F | QQVUW53ooDcpMJ4g7NTeXgR59F |
| Size | not specified | not specified | not specified | not specified | not specified | not specified | 7 Fork (Fit 72" Bucket) | not specified | not specified | not specified | not specified | 8.5" 2000W | not specified | not specified | not specified |
Is a 6.7-Amp Motor Worth It?
A 6.7-amp motor provides dedicated power for an 8-inch blade spinning at 3,576 RPM. In daily use, this amperage rating handles small DIY tasks, light jobsite cuts, and basic board sizing. The motor supports 0 to 45-degree bevel adjustments and standard cross cuts without requiring a large machine footprint. It balances steady rotation with compact tool designs across every model on this list. Choosing 6.7 amps means you prioritize light-duty woodworking and easy transport over larger cutting capacities.
Worth it if
- You focus on DIY woodworking, basic board sizing, and light jobsite cuts.
- You need 3,576 RPM cutting speed paired with 0 to 45-degree bevel capability.
Skip it if
- You require a motor rating higher than 6.7 amps for heavy-duty cutting tasks.
- You need a blade diameter larger than 8 inches for thicker stock.
If you plan workshop floor space, you can also compare specs for the best 7 ft pool tables.
How We Ranked These Saws
To build this guide, we select table saws stating a 6.7-amp motor in the product title or feature list. All details come directly from published manufacturer specifications, and products are not physically handled. Only one variant per product family is included on this list.
The 15 saws are ordered with in-stock products first, then by Amazon sales rank, placing better-selling models first. You can compare additional published specifications like blade diameter, no-load speed, and weight to find the right compact tool for your needs. Prices and stock update live on the page at least daily.
Key Specifications for Choosing Your Table Saw
-
Check the Bevel Range
Check the bevel angle range if your projects require angled cuts alongside straight ripping. Models in this category offer bevel adjustments from 0 to 45 degrees. You need this feature for assembling boxes, frames, and angled trim joints. The ExploreHorizon 8-Inch Compact Table Saw includes a 0 to 45-degree bevel adjustment. If you only make 90-degree square cuts, bevel flexibility matters less. If you handle angled joints, ensure the saw provides clear angle adjustments up to 45 degrees.
-
Measure Your Benchtop Space
Examine the physical dimensions of the saw base to match your available workspace. Widths vary considerably among compact units. The GARVEETECH 8-Inch 6.7-Amp Compact Table Saw measures 10 inches wide, 15 inches long, and 20 inches high, making it ideal for narrow benches. Larger frames occupy more surface area but provide wider support. If you work in a tight garage or transport tools between jobsites, select smaller outer dimensions to maximize your available workspace.
-
Prioritize Built-In Dust Capture
Look at dust collection capability if you cut wood indoors or in confined work areas. Airborne sawdust accumulates rapidly during rip cuts and cross cuts. The TrailBlaze 8-Inch 6.7-Amp Table Saw specifies high dust capture to keep cutting lines visible and manage debris. Choosing a model with dedicated dust extraction helps you maintain clean workspaces without requiring constant manual cleanup. If you cut outdoors exclusively, dust containment is less critical, but indoor work demands effective dust control.
-
Verify Motor Windings Material
Check the motor winding construction listed in the technical specifications. Several 6.7-amp table saws feature dedicated copper motors designed for consistent performance. For example, the MERXENG 8-Inch 6.7-Amp Portable Table Saw utilizes a copper motor rated at 3,576 RPM. Copper windings provide reliable electrical conductivity during demanding DIY cuts. When comparing portable jobsite saws, confirm whether the product description specifies a copper motor build so you get dependable motor operation for sizing lumber and cutting sheet goods.
-
Evaluate Blade Diameter Requirements
Review the blade diameter specification before selecting a saw. These models standardize on an 8-inch blade diameter rather than larger stationary saw sizes. An 8-inch blade matches small DIY projects and light jobsite wood sizing where compact portability takes precedence. Saws like the SierraSquad 8-Inch Portable Table Saw use this blade size with a 3,576 RPM no-load speed. If your work involves thin boards and trim molding, an 8-inch blade provides sufficient cut depth while keeping the tool light and easy to position.
-
Inspect Integrated Safety Features
Examine the safety controls and protective guards included on each unit. Benchtop cutting requires barrier protection to keep hands clear of the rotating blade. The EliteEdge 8-Inch 6.7-Amp Compact Table Saw incorporates essential safety guards designed for basic jobsite and DIY tasks. When evaluating options, check that the model includes physical blade covers and accessible power switches. You need these features to maintain safe control when feeding boards through the 3,576 RPM blade, especially when working in compact workshop spaces.
Frequently asked questions
What blade size do 6.7-amp table saws use?
All 15 table saws in this category use an 8-inch blade diameter. This size pairs directly with the 6.7-amp motor to achieve the standard 3,576 RPM no-load speed across every model. The 8-inch format keeps the machine compact for benchtop work and light jobsite tasks. It allows adequate cutting capacity while maintaining a portable footprint.
What is the typical motor speed for a 6.7-amp table saw?
A 6.7-amp table saw consistently operates at a no-load speed of 3,576 RPM. Every model evaluated in this guide shares this exact motor velocity specification. This rotational speed is matched to 8-inch blades to execute basic rip cuts and crosscuts cleanly. Saws like the ExploreHorizon and MERXENG utilize copper motor construction to maintain this rotation during operation.
How much does a 6.7-amp portable table saw weigh?
Weights for these saws range between 15 pounds and 50.3 pounds. The lightest options on our list are two PioneerWorks models at 15 pounds each, making them easy to carry. The heaviest unit is the EliteEdge saw at 50.3 pounds. Most models sit between 25 and 36 pounds, balancing jobsite stability with transport ease.
Can 6.7-amp table saws make bevel cuts?
Yes, models in this selection feature bevel adjustment ranges from 0 to 45 degrees. Saws such as the Towallmark, SierraSquad, and GarveeTech provide this tilting mechanism for angled woodwork. You adjust the blade angle to cut compound joints, mitered edges, and framing bevels. The bevel capacity matches standard small-shop requirements without demanding a larger benchtop profile.
What materials are 6.7-amp table saws intended to cut?
Manufacturers specify these saws for DIY projects and light jobsite wood cutting tasks. Their 6.7-amp power plants and 8-inch blades handle dimensional lumber sizing, craft boards, and basic trim woodwork. They are engineered for home workshops and mobile trades needing basic lumber sizing rather than heavy industrial timber processing.
Which 6.7-amp table saw has the smallest footprint?
The GARVEETECH compact table saw features the narrowest width on our list at 10 inches wide, 15 inches long, and 20 inches high. Other compact options like the PioneerWorks measure 13.5 inches wide by 14 inches long and 13 inches high. Compact exterior dimensions let you store the machine on narrow shelves or transport it easily in small vehicle trunks.
What motor construction do 6.7-amp table saws feature?
Several models specify copper motor construction, including the ExploreHorizon, TrailBlaze, MERXENG, and GarveeTech saws. TrailBlaze lists an 800W copper motor configuration within its 6.7-amp rating. Copper windings provide consistent thermal handling and steady electrical conductivity. This motor design powers the 3,576 RPM cutting speed specified across the entire lineup of 15 saws.