15 Best 6-1/2-Inch Table Saws, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best 6 1 2 inch table saws requires careful comparison of published specifications. We evaluated 15 models based on data from the listings. The Milwaukee M18 Cordless 6-1/2-Inch Circular Saw leads this list because it offers a durable magnesium guard and an aluminum shoe for framing cuts. This guide helps you decide which tool fits your specific needs by focusing on weight, power source, and cutting capacity.
Quick picks
The best fit for you
- You need durable cordless framing cuts with M18 batteries Milwaukee M18 Cordless 6-1/2-Inch Circular Saw It delivers 3,500 RPM speeds with magnesium guards and fits the M18 battery system.
- You require precise straight cuts for cordless sheet breakdown DEWALT 20V MAX XR 6-1/2-Inch Cordless Track Saw This track saw cuts within 1/32 of an inch and includes built-in kickback protection.
- You want guided plunge cuts with variable speeds Makita 6-1/2-Inch Plunge Saw with Guide Rail The 12-amp motor pairs with a 55-inch track for accurate plunge cutting up to 48 degrees.
- You need a lightweight bare tool for DEWALT 20V owners DEWALT 6-1/2-Inch Brushless Cordless Circular Saw It weighs 6.3 pounds and offers a 50-degree bevel range with a rapid electric brake.
Our 15 picks
Milwaukee M18 Cordless 6-1/2-Inch Circular Saw
Best for: M18 platform users needing durable framing cuts
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- No-Load Speed
- 3,500 RPM
- Power Source
- Cordless
- Dimensions
- 12.3 × 8.5 × 8 inches
- Weight
- 7.28 pounds
View on Amazon: Milwaukee M18 Cordless 6-1/2-Inch Circular Saw
This cordless 6-1/2-inch circular saw runs on the Milwaukee M18 battery platform and spins at 3,500 RPM. It features an aircraft aluminum shoe for stability alongside magnesium upper and lower guards. At 7.28 pounds, you get a portable tool built for framing, electrical, and carpentry tasks. It suits you if you already own compatible M18 batteries and need a durable, compact saw for jobsite cuts.
Pros
- 3,500 RPM no-load cutting speed
- Magnesium upper and lower blade guards
- Aircraft aluminum shoe for stability
- Lightweight 7.28-pound bare tool weight
Cons
- Sold as a bare tool without battery or charger
- No rip fence or carrying case listed
Good fit if
- You already own Milwaukee M18 batteries and chargers.
- You want magnesium guards and an aluminum shoe for durability.
- You need a 7.28-pound cordless saw for framing and carpentry.
Skip if
- You need a complete kit with an included battery and charger.
- You require a corded tool for continuous workshop power.
Verdict: Milwaukee M18 Cordless 6-1/2-Inch Circular Saw delivers 3,500 RPM cutting speeds with durable magnesium guards and an aluminum shoe. It gives you dependable cordless cutting if you already use the M18 battery system.
DEWALT 20V MAX XR 6-1/2-Inch Cordless Track Saw
Best for: cordless sheet breakdown requiring precise straight cuts
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- No-Load Speed
- 2,500 - 5,400 RPM
- Voltage
- 20V MAX
- Power Source
- Cordless
- Dimensions
- 44.3 × 11.3 × 11.3 inches
- Weight
- 13 pounds
View on Amazon: DEWALT 20V MAX XR 6-1/2-Inch Cordless Track Saw
This 20V cordless track saw runs a 6-1/2-inch blade with variable speeds between 2,500 and 5,400 RPM. It features an integrated kickback brake that halts the motor during stalls or pinches. Built for straight cuts within 1/32 of an inch, the 13-pound tool suits you if you need portable sheet-breakdown capability and already own compatible DEWALT 20V batteries.
Pros
- Variable speed range from 2,500 to 5,400 RPM
- Kickback brake automatically stops motor upon pinch or bind-up
- Includes 48-tooth fine-finish blade and onboard wrench
- Rated for straight cuts within 1/32 of an inch
Cons
- Guide tracks and track connectors sold separately
- Battery and charger not included
- Weighs 13 pounds without a battery pack
Good fit if
- You need adjustable blade speeds from 2,500 to 5,400 RPM for different materials.
- You already use DEWALT 20V MAX cordless batteries.
- You require straight plunge cuts accurate to within 1/32 of an inch.
Skip if
- You need a complete kit that includes guide tracks out of the box.
- You prefer a lightweight circular saw under 10 pounds.
Verdict: DEWALT 6-1/2-Inch Cordless Plunge Track Saw delivers precise cuts within 1/32 of an inch alongside built-in kickback protection. Its variable speed dial provides broad material control if you supply your own track and 20V battery.
Makita 6-1/2-Inch Plunge Saw with Guide Rail
Best for: guided plunge cuts needing variable speeds
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- Dimensions
- 59 × 12 × 14 inches
- Weight
- 16.5 pounds
View on Amazon: Makita 6-1/2-Inch Plunge Saw with Guide Rail
This corded 6-1/2-inch plunge saw kit includes a 55-inch guide rail and a stackable case. Its 12-amp motor delivers variable speeds between 2,000 and 5,200 RPM to handle various materials. You get a cutting depth of 2-3/16 inches at 90 degrees and a bevel range from -1 to 48 degrees. It suits you if you need guided plunge cuts with steady corded power.
Pros
- Variable speed motor runs from 2,000 to 5,200 RPM
- Includes a 55-inch guide rail and stackable tool case
- Bevel capacity from -1 to 48 degrees with positive stops at 22.5 and 45 degrees
- Cuts up to 2-3/16 inches deep at 90 degrees
Cons
- Requires a corded power connection
- Weighs 16.5 pounds
Good fit if
- You need a dedicated 55-inch guide rail for straight plunge cuts.
- You want variable speed control between 2,000 and 5,200 RPM.
- You work near power outlets and prefer continuous corded operation.
Skip if
- You need cordless battery portability on the jobsite.
- You want a lighter tool than this 16.5-pound saw kit.
Verdict: Makita 6-1/2-Inch Corded Plunge Cut Saw Kit pairs a 12-amp variable-speed motor with a 55-inch track for controlled, accurate plunge cutting. It delivers continuous power and deep bevel cuts up to 48 degrees without relying on battery charges.
Makita 18V Brushless 6-1/2-Inch Cordless Circular Saw
Best for: users already invested in 18V battery platforms
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- No-Load Speed
- 5,000 RPM
- Voltage
- 18V
- Power Source
- Cordless
- Dimensions
- 14 × 7.8 × 10.4 inches
- Weight
- 7 pounds
View on Amazon: Makita 18V Brushless 6-1/2-Inch Cordless Circular Saw
This cordless saw features a 6-1/2-inch blade diameter powered by an 18V brushless motor. Running at a no-load speed of 5,000 RPM, it uses automatic speed adjustment to regulate cutting speed and torque under load. At seven pounds, the tool measures 14 inches long and 7.8 inches wide. It suits you if you already own compatible 18V batteries and need a compact cordless unit for general cutting.
Pros
- Brushless motor delivers up to 5,000 RPM no-load speed
- Automatic Speed Change matches torque and RPM during cuts
- Weighs 7 pounds for portable handling
- Operates on standard 18V cordless platform
Cons
- Sold as bare tool without battery or charger
- Does not include track guide or storage case
Good fit if
- You already own compatible 18V lithium-ion batteries.
- You want a lightweight 7-pound saw with a 5,000 RPM brushless motor.
Skip if
- You need a complete kit with included batteries and charger.
- You require a corded tool for continuous power without swapping batteries.
Verdict: Makita 6-1/2-Inch Brushless Cordless Saw gives you a 5,000 RPM motor and automatic torque regulation in a 7-pound bare-tool format.
DEWALT 20V MAX 6-1/2-Inch Cordless Circular Saw
Best for: cordless jobsite cutting with bundled power accessories
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- Voltage
- 20V MAX*
- Power Source
- Cordless
- Dimensions
- 15.9 × 12 × 8.75 inches
- Weight
- 7.6 pounds
View on Amazon: DEWALT 20V MAX 6-1/2-Inch Cordless Circular Saw
This cordless DEWALT tool is a 6-1/2-inch brushless circular saw powered by a 20V MAX 5.0Ah battery pack. It weighs 7.6 pounds and features a tool-free bevel adjustment reaching up to 50 degrees, along with an integrated electric blade brake. If you need a complete cutting kit with an included charger, blade, dust chute, and carry bag for jobsite framing or general carpentry, this setup gives you cordless operation right away.
Pros
- Includes 20V MAX 5.0Ah battery, charger, blade, and kit bag
- Tool-free bevel capacity adjusts from 0 to 50 degrees
- Electric brake stops the blade quickly after trigger release
- Built-in rafter hook allows easy hanging storage
Cons
- Maximum bevel angle is limited to 50 degrees
- Continuous runtime is limited by the single included battery
Good fit if
- You want a complete cordless kit with a battery, charger, and storage bag included.
- You need tool-free bevel cuts up to 50 degrees.
- You value an electric blade brake for quick stopping between cuts.
Skip if
- You require bevel cuts past 50 degrees.
- You prefer a continuous corded power supply without recharging.
Verdict: DEWALT 6-1/2-Inch Cordless Brushless Circular Saw provides battery-powered cutting with an electric brake, a 50-degree bevel capacity, and bundled accessories. It suits you if you need a portable 6-1/2-inch setup ready to cut without separate battery purchases.
Milwaukee M18 Fuel 6-1/2-Inch Cordless Circular Saw
Best for: Milwaukee M18 platform users needing bare tools
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- Voltage
- 18V
- Dimensions
- 13.5 × 9 × 8.2 inches
- Weight
- 8.4 pounds
View on Amazon: Milwaukee M18 Fuel 6-1/2-Inch Cordless Circular Saw
This bare tool circular saw gives you an 18V brushless motor paired with a 6-1/2-inch blade capacity. At 8.4 pounds and measuring 13.5 inches long, 9 inches wide, and 8.2 inches high, it provides standard cutting sizing in a cordless footprint. It suits you if you already run Milwaukee 18V batteries and need a dedicated 6-1/2-inch saw for your work without purchasing extra chargers.
Pros
- Brushless 18V cordless motor
- Standard 6-1/2-inch blade diameter
- Weighs 8.4 pounds
- Footprint measures 13.5 by 9 by 8.2 inches
Cons
- Sold as bare tool without battery or charger
- No blade listed in the package data
Good fit if
- You already own Milwaukee M18 18V batteries and chargers.
- You need an 8.4-pound brushless saw for 6-1/2-inch cutting.
Skip if
- You need a bundled kit containing batteries and a charger.
- You prefer a corded saw for continuous outlet power.
Verdict: Milwaukee M18 FUEL 6-1/2-Inch Brushless Circular Saw delivers cordless 18V cutting in an 8.4-pound package for users already stocked with Milwaukee batteries.
DEWALT 6-1/2-Inch Brushless Cordless Circular Saw
Best for: DEWALT battery owners needing bevel cutting portability
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- Voltage
- 20V MAX
- Power Source
- Cordless
- Dimensions
- 15.3 × 9.63 × 8.5 inches
- Weight
- 6.3 pounds
View on Amazon: DEWALT 6-1/2-Inch Brushless Cordless Circular Saw
This renewed DEWALT 20V MAX cordless saw features a 6-1/2-inch blade size and a brushless motor. Weighing 6.3 pounds, the unit includes an integrated electric brake, a tool-free bevel adjustment ranging from 0 to 50 degrees, and a built-in rafter hook. It suits you if you already own compatible 20V batteries and need a lightweight, compact cutting tool for angled and standard cuts without cords getting in your way.
Pros
- Brushless motor powered by 20V MAX cordless platform
- Tool-free bevel capacity adjusts from 0 to 50 degrees
- Integrated electric brake stops the blade quickly upon trigger release
- Lightweight 6.3-pound body includes a built-in rafter hook
Cons
- Bare-tool configuration does not include a battery or charger
- Offered as a renewed unit rather than factory new
Good fit if
- You already own DEWALT 20V MAX batteries and compatible chargers.
- You need a 6.3-pound compact tool capable of bevel cuts up to 50 degrees.
- You want safety and storage features like an electric brake and rafter hook.
Skip if
- You need an included battery and charger right out of the box.
- You prefer purchasing brand-new tools rather than renewed items.
Verdict: DEWALT 20V MAX 6-1/2-Inch Brushless Cordless Saw provides portable cutting performance with a 50-degree bevel range and rapid electric blade brake. It delivers essential cordless functionality in a 6.3-pound bare-tool package if you already use DEWALT 20V batteries.
DEWALT 6-1/2-Inch Corded Track Saw Kit
Best for: splinter-free corded track cuts in hard woods
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- Amperage
- 12A
- Cutting Depth 90
- 2-1/8 (54mm)
- Dimensions
- 18.1 × 12.4 × 12.1 inches
- Weight
- 1.52 pounds
This DEWALT track saw kit provides a corded cutting system with a 6-1/2-inch blade and a 12-amp, 1,300-watt motor. You get an on-track cut depth of 2-1/8 inches at 90 degrees and 1-5/8 inches at 45 degrees. It includes a continuous anti-kickback mechanism and a riving knife. If you need clean, splinter-free cuts in hard woods without relying on battery packs, this corded unit fits your workshop requirements.
Pros
- 12-amp, 1,300-watt corded motor cuts hard woods up to 2-1/8 inches thick
- Continuous anti-kickback mechanism and integrated riving knife
- On-track depth scale accurately indicates depth accounting for track thickness
- Low-profile blade guard designed for confined workspaces
Cons
- Requires corded power connection rather than cordless battery operation
- Maximum cut depth limited to 1-5/8 inches at 45 degrees
Good fit if
- You want continuous 12-amp corded power for cutting hard woods.
- You need an anti-kickback mechanism and riving knife for straight track cuts.
- You require splinter-free cuts up to 2-1/8 inches deep at 90 degrees.
Skip if
- You prefer cordless battery mobility over a corded tool.
- You need a cutting depth greater than 2-1/8 inches at 90 degrees.
Verdict: DEWALT 6-1/2-Inch Corded Track Saw Kit delivers steady corded power with a 12-amp motor and an integrated riving knife. It serves you well when splinter-free, track-guided cuts up to 2-1/8 inches are your main priority.
CRAFTSMAN V20 6-1/2-Inch Cordless Circular Saw Kit
Best for: cordless cutting of 2X dimensional lumber
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- No-Load Speed
- 4,000 RPM
- Power Source
- Cordless
- Voltage
- 20V MAX
- Dimensions
- 14 × 8.75 × 11.3 inches
- Weight
- 10.2 pounds
View on Amazon: CRAFTSMAN V20 6-1/2-Inch Cordless Circular Saw Kit
This cordless tool runs on the CRAFTSMAN 20V MAX platform and includes a battery and charger. It spins a 6-1/2-inch blade at up to 4,000 RPM, giving you the capacity to cross-cut and rip 2X material. The tool-free beveling shoe adjusts up to 50 degrees for angled cuts. Weighing 10.2 pounds, this kit suits you if you need a self-contained cordless cutting setup for standard framing lumber.
Pros
- Includes battery and charger
- 4,000 RPM no-load speed
- Tool-free bevel shoe adjusts up to 50 degrees
- Cuts through 2X dimensional lumber
Cons
- Total weight is 10.2 pounds
- No dust collection port listed in specifications
Good fit if
- You want an all-in-one kit that includes a battery and charger.
- You make bevel cuts up to 50 degrees without needing hand tools.
- You regularly cut or rip 2X dimensional framing lumber.
Skip if
- You prefer a tool lighter than this 10.2-pound package.
- You need a corded saw for non-stop benchtop runtime.
Verdict: CRAFTSMAN V20 6-1/2-Inch Cordless Saw Kit provides a 4,000 RPM cutting platform complete with an included battery, charger, and 50-degree bevel shoe. It handles 2X lumber without requiring an outlet or separate battery purchase.
DEWALT 20V MAX 6-1/2-Inch Cordless Circular Saw Kit
Best for: complete cordless 2x lumber cutting setups
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- No-Load Speed
- 5150 rpm
- Voltage
- 20V MAX
- Dimensions
- 17.6 × 13 × 9.31 inches
- Weight
- 9 pounds
View on Amazon: DEWALT 20V MAX 6-1/2-Inch Cordless Circular Saw Kit
This DEWALT 20V MAX cordless circular saw kit includes a 6-1/2-inch carbide-tipped blade, a 5.0-Ah battery, and a charger. Its motor runs at 5150 rpm to cut 2x material at both 90 and 45 degrees. The tool features a 0 to 50-degree bevel capacity and a magnesium shoe. At 9 pounds, it suits you if you need a complete cordless cutting setup with bevel flexibility.
Pros
- Motor delivers a 5150 rpm no-load speed
- Bevel capacity ranges from 0 to 50 degrees
- Includes a 5.0-Ah battery, charger, and carbide-tipped blade
- Magnesium shoe provides job-site durability
Cons
- Total weight reaches 9 pounds
- No track or guide rail included
Good fit if
- You need an included 5.0-Ah battery and charger rather than a bare tool.
- You regularly cut 2x material at 90-degree and 45-degree angles.
- You require bevel cut angles up to 50 degrees.
Skip if
- You already own compatible batteries and prefer a bare tool.
- You need a dedicated plunge track saw system.
Verdict: DEWALT 20V MAX 6-1/2-Inch Cordless Circular Saw Kit delivers 5150 rpm cutting speed and 50-degree bevel capability in a bundled package. It gives you a complete battery-powered cutting setup ready for standard framing lumber.
Makita 6-1/2-Inch Cordless Plunge Circular Saw
Best for: Cordless plunge cuts needing variable speeds
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- Voltage
- 36V
- Power Source
- Cordless
- Dimensions
- 16 × 12.1 × 19.6 inches
- Weight
- 27.6 pounds
View on Amazon: Makita 6-1/2-Inch Cordless Plunge Circular Saw
This Makita plunge circular saw kit pairs a 6-1/2-inch blade with a 36-volt brushless motor powered by two 18V batteries. You get variable speed ranging from 2,500 to 6,300 RPM and an 11/16-inch close-to-wall cutting design. It suits you if you need a portable cordless plunge-cut setup with high blade speeds for controlled sizing and trimming tasks across varied materials without relying on a power outlet.
Pros
- Variable speed dial adjusts from 2,500 to 6,300 RPM
- Dual 18V battery configuration delivers 36V power
- Close-to-wall cutting capability down to 11/16 inch
- Brushless motor features automatic speed change technology
Cons
- Total listed weight is 27.6 pounds
- Requires two 18V batteries simultaneously for operation
Good fit if
- You need variable cutting speeds between 2,500 and 6,300 RPM.
- You already use Makita 18V batteries and want 36V cordless output.
- You require plunge cuts within 11/16 inch of adjacent walls.
Skip if
- You prefer a lighter single-battery cordless saw setup.
- You need a stationary benchtop table saw with a rip fence.
Verdict: Makita 6-1/2-Inch Cordless Plunge Saw Kit delivers 36V brushless power and variable speeds up to 6,300 RPM for jobsite plunge cutting. Its 11/16-inch wall clearance and dual-battery system provide solid cutting flexibility without power cords.
Milwaukee M18 FUEL 6-1/2-Inch Plunge Track Saw
Best for: precise track cuts on existing battery platforms
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- Dimensions
- 16 × 9.02 × 9.02 inches
- Weight
- 11.7 pounds
View on Amazon: Milwaukee M18 FUEL 6-1/2-Inch Plunge Track Saw
This cordless 6-1/2-inch plunge track saw features a brushless motor, variable speed dial, and an adjustable cam system for track alignment. At 11.7 pounds, it includes bevel stops at 22.5, 45, and 48 degrees, plus a built-in riving knife to prevent binding. If you need portable, guided plunge cuts with integrated dust collection using 1-7/8-inch vacuum hoses, this bare tool matches your existing battery platform.
Pros
- Preset bevel stops at 22.5, 45, and 48 degrees
- Variable speed dial for blade control
- Integrated riving knife to reduce kickback
- Compatible with 1-7/8-inch vacuum hoses
Cons
- Sold as a bare tool without battery or charger
- Guide track not included in base package
- Heavier bare-tool profile at 11.7 pounds
Good fit if
- You already own compatible 18-volt batteries and chargers.
- You need dedicated bevel stops at 22.5, 45, and 48 degrees.
- You want guided plunge cuts with micro-depth adjustment.
Skip if
- You need a complete kit with included batteries and charger.
- You prefer a lightweight handheld saw under 10 pounds.
- You want a package that includes a guide track out of the box.
Verdict: Milwaukee M18 FUEL 6-1/2-Inch Cordless Plunge Track Saw delivers controlled plunge cutting with dedicated bevel stops and a variable speed dial. It suits users who already have compatible batteries and require track-guided precision.
Milwaukee 18V 6-1/2-Inch Circular Saw
Best for: 18V users wanting an included battery
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- Voltage
- 18-Volt
- Dimensions
- 15 × 11 × 13 inches
This red Milwaukee saw pairs an 18-volt power supply with a 6-1/2-inch blade diameter. It includes an M18 XC high-capacity battery directly in the box, giving you immediate power. The tool measures 15 inches long, 11 inches wide, and 13 inches high. You get an 18V cordless platform built around standard 6-1/2-inch blades, making it suitable if you want a dedicated battery-powered cutting setup.
Pros
- Includes an M18 XC high-capacity battery
- Uses standard 6-1/2-inch blade diameter
- Operates on an 18-volt cordless platform
- Measures 15 inches long by 11 inches wide by 13 inches high
Cons
- No battery charger listed in the specifications
- No rip fence or track included in the data
Good fit if
- You need an 18-volt tool that includes an M18 XC battery.
- You work with standard 6-1/2-inch cutting blades.
Skip if
- You need a bundle that includes a charger.
- You prefer corded power rather than an 18V battery system.
Verdict: Milwaukee 18V 6-1/2-Inch Saw with Battery delivers cordless 18-volt power with an included M18 XC high-capacity battery. It gives you a dedicated 6-1/2-inch blade setup measuring 15 by 11 by 13 inches.
BLACK+DECKER 6-1/2-Inch Brushless Cordless Saw
Best for: general cordless DIY cutting with bundled battery
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- No-Load Speed
- 4,300 RPM
- Cutting Depth 90
- 2-5/32 in.
- Voltage
- 20V MAX
- Power Source
- Cordless
- Dimensions
- 16.7 × 8.86 × 9.1 inches
View on Amazon: BLACK+DECKER 6-1/2-Inch Brushless Cordless Saw
This cordless saw runs on a 20V MAX platform with a brushless motor delivering 4,300 RPM. You get a cutting depth of 2-5/32 inches at 90 degrees and 1-9/16 inches at 45 degrees, with bevel capacity reaching 50 degrees. The package includes a 2.5Ah battery and charger. Built-in LED illumination and an aluminum base plate make it a practical pick if you need a self-contained cutting kit for everyday DIY tasks.
Pros
- Brushless motor delivers up to 4,300 RPM no-load speed
- Bevel adjustment cuts up to 50 degrees
- Includes 2.5Ah battery with state-of-charge indicator and charger
- Aluminum base plate supports compatible guide rails
Cons
- Guide rail is not included
- Dust collection bag and vacuum adapter sold separately
Good fit if
- You need an all-in-one cordless kit that includes a battery and charger.
- You want bevel capability up to 50 degrees for angled work.
- You make cuts up to 2-5/32 inches deep at 90 degrees.
Skip if
- You need a guide rail included in the package.
- You require bundled dust collection adapters or bags.
Verdict: BLACK+DECKER 6-1/2-Inch Brushless Cordless Saw provides solid cutting capacity with a 4,300 RPM brushless motor, 50-degree bevel range, and an included 2.5Ah battery kit. It suits standard home workshop tasks where cordless portability is a priority.
Bosch 18V 6-1/2-Inch Blade-Left Circular Saw
Best for: right-handed users cutting 2x lumber
- Blade Diameter
- 6-1/2-Inch (what this guide is about)
- Cutting Depth 90
- 2 in.
- Voltage
- 18V
- Weight
- 6.6 pounds
View on Amazon: Bosch 18V 6-1/2-Inch Blade-Left Circular Saw
This Bosch 18V cordless tool provides a 6-1/2-inch blade with a left-side blade configuration. You get a 2-inch cut depth at 90 degrees, handling 2x lumber across its 50-degree bevel capacity. Weighing 6.6 pounds without a battery, the saw features an integrated dust blower and heavy-duty aluminum guards. It suits you if you need a lightweight framing saw for quick cuts on an 18V battery platform.
Pros
- Cuts 2 inches at 90 degrees and clears 2x lumber across bevel range
- Bevel adjustment reaches up to 50 degrees
- Blade-left design provides clear cut-line sight for right-handed users
- Lightweight bare-tool weight of 6.6 pounds
Cons
- Bare tool configuration includes no battery or charger
- Cutting depth limited to 2 inches at 90 degrees
Good fit if
- You already own compatible 18V batteries
- You hold the main handle with your right hand and want an unobstructed line of sight
- You need up to 50 degrees of bevel capacity for 2x stock
Skip if
- You require cut depths exceeding 2 inches at 90 degrees
- You need an all-in-one kit that includes a battery and charger
Verdict: Bosch 18V 6-1/2-Inch Blade-Left Circular Saw delivers a 2-inch cutting depth and 50-degree bevel capacity in a lightweight 6.6-pound frame. It is a practical choice if you cut 2x material and operate on the 18V battery platform.
Specifications side by side
| Spec | Milwaukee M18 Cordless 6-1/2-Inch Circular Saw | DEWALT 20V MAX XR 6-1/2-Inch Cordless Track Saw | Makita 6-1/2-Inch Plunge Saw with Guide Rail | Makita 18V Brushless 6-1/2-Inch Cordless Circular Saw | DEWALT 20V MAX 6-1/2-Inch Cordless Circular Saw | Milwaukee M18 Fuel 6-1/2-Inch Cordless Circular Saw | DEWALT 6-1/2-Inch Brushless Cordless Circular Saw | DEWALT 6-1/2-Inch Corded Track Saw Kit | CRAFTSMAN V20 6-1/2-Inch Cordless Circular Saw Kit | DEWALT 20V MAX 6-1/2-Inch Cordless Circular Saw Kit | Makita 6-1/2-Inch Cordless Plunge Circular Saw | Milwaukee M18 FUEL 6-1/2-Inch Plunge Track Saw | Milwaukee 18V 6-1/2-Inch Circular Saw | BLACK+DECKER 6-1/2-Inch Brushless Cordless Saw | Bosch 18V 6-1/2-Inch Blade-Left Circular Saw |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Diameter | 6-1/2" | 6-1/2 in. | not specified | 6-1/2" | 6-1/2-Inch | 6-1/2 in. | 6-1/2 in. | 6-1/2-Inch | 6-1/2" | 6-1/2-Inch | 6-1/2 inch | 6 1/2 Inch | 6-1/2-Inch | 6-1/2 in. | 6-1/2 In. |
| Amperage | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 12A | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| No-Load Speed | 3,500 RPM | 2,500 - 5,400 RPM | not specified | 5,000 RPM | not specified | not specified | not specified | not specified | 4,000 RPM | 5150 rpm | not specified | not specified | not specified | 4,300 RPM | not specified |
| Cutting Depth 90 | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 2-1/8 (54mm) | not specified | not specified | not specified | not specified | not specified | 2-5/32 in. | 2 in. |
| Voltage | not specified | 20V MAX | not specified | 18V | 20V MAX* | 18V | 20V MAX | not specified | not specified | 20V MAX | 36V | not specified | 18-Volt | 20V MAX | 18V |
| Power Source | Cordless | Cordless | not specified | Cordless | Cordless | not specified | Cordless | not specified | Cordless | not specified | Cordless | not specified | not specified | Cordless | not specified |
| Dimensions | 12.3 × 8.5 × 8 inches | 44.3 × 11.3 × 11.3 inches | 59 × 12 × 14 inches | 14 × 7.8 × 10.4 inches | 15.9 × 12 × 8.75 inches | 13.5 × 9 × 8.2 inches | 15.3 × 9.63 × 8.5 inches | 18.1 × 12.4 × 12.1 inches | 14 × 8.75 × 11.3 inches | 17.6 × 13 × 9.31 inches | 16 × 12.1 × 19.6 inches | 16 × 9.02 × 9.02 inches | 15 × 11 × 13 inches | 16.7 × 8.86 × 9.1 inches | not specified |
| Weight | 7.28 pounds | 13 pounds | 16.5 pounds | 7 pounds | 7.6 pounds | 8.4 pounds | 6.3 pounds | 1.52 pounds | 10.2 pounds | 9 pounds | 27.6 pounds | 11.7 pounds | not specified | not specified | 6.6 pounds |
| Color | Red | Black, Yellow | Teal | Teal | Multi | Red/Black | Yellow and Black | Multi | Multicolor | Multi | Multicolor | Red | Red | Black, Orange | Multicolor |
| Model | M18 | DCS525B | SP6000J1 | XSH03Z | DCS565P1 | 2833-20 | DCS565BR | DWS520K | CMCS500M1 | DCS391P1 | XPS01PTJ | 2831-20 | 2630-20 | BLCS78E1 | CCS180B |
| Size | not specified | not specified | One Size | 0.625 in | 6-1/2-Inch | not specified | 6-1/2-Inch | 6-1/2-Inch | 6-1/2-in. | One Size | 6.5 in | not specified | not specified | not specified | One Size |
Is a 6-1/2-Inch Blade Diameter Worth It for Your Work?
A 6-1/2-inch blade offers a specific depth of cut that suits standard framing lumber and sheet goods. Most models here provide a 50-degree bevel range and cutting depths adequate for 2x dimensional lumber. You get portability without sacrificing essential capacity. Corded track saws like the Makita SP6000J1 add guided precision, while cordless options from Milwaukee and DEWALT deliver rapid 3,500 to 5,000 RPM speeds. This size balances power and maneuverability for general construction tasks.
Worth it if
- You primarily cut standard 2x dimensional lumber on jobsites
- You need a cordless tool that fits your existing battery platform
- You require precise track-guided cuts for sheet goods
Skip it if
- You need to rip wide panels without a table saw
- You require deep cut capacity beyond standard framing materials
- You prefer heavy-duty stationary tools for high-volume production
How We Selected These Saws
We identified these tools by scanning Amazon listings for the specific blade diameter of 6-1/2-Inch. We only included models where the title or feature list explicitly stated this size. This ensures every product on the list shares the same core cutting capacity. We selected one variant per product family to keep the comparison clean and focused on the feature you care about most.
The products are ordered by availability first. Then, we sorted them by the listing's overall rating weighted by the number of ratings. Finally, we considered how many of our guide criteria the specs met. All details come directly from published specifications. We do not handle these tools or test them in a workshop. Prices and stock status are shown live on the page and refresh daily.
Key Specs for Choosing Saws
-
Check Power Source Type
Decide between corded and cordless operation based on your workspace. Cordless models like the Milwaukee M18 offer portability for framing cuts without outlet access. Corded options such as the Makita SP6000J1 provide continuous power for deep plunge cuts. If you already own a battery platform, choose a tool that matches your existing voltage system. This ensures compatibility and avoids redundant purchases. Verify the power source matches your typical job site conditions and mobility needs.
-
Compare No-Load Speed
No-load speed indicates how fast the blade spins when idle. Higher RPMs generally cut faster through softwoods. The Makita XSH03Z reaches 5,000 RPM, while the Milwaukee M18 runs at 3,500 RPM. Consider the material you cut most often. Harder woods may benefit from higher speeds, while delicate materials might require slower, controlled cuts. Check the listed RPM to ensure the tool handles your primary workload efficiently without stalling or burning the wood surface during operation.
-
Evaluate Bevel Capacity
Bevel capacity determines the maximum angle you can tilt the blade. Many models here offer a 50-degree range, such as the DEWALT DCS565P1 and CRAFTSMAN CMCS500M1. This allows for steep compound cuts if needed. If you only make straight cuts, this spec matters less. However, for detailed joinery or angled framing, a wider range provides flexibility. Verify the bevel stops and locking mechanisms ensure accuracy at your preferred angles during repetitive cuts.
-
Assess Tool Weight
Weight affects portability and fatigue during overhead or prolonged use. Lighter tools like the DEWALT DCS565BR weigh 6.3 pounds, making them easy to carry on ladders. Heavier kits, like the Makita XPS01PTJ at 27.6 pounds, include batteries and tracks for stability but reduce mobility. Choose a weight that matches your physical comfort and job requirements. Consider if you need a bare tool or a complete kit, as this significantly impacts the total carrying weight.
-
Review Included Accessories
Check what comes in the box to avoid extra purchases. Some kits include batteries, chargers, and tracks, like the Makita SP6000J1 and CRAFTSMAN CMCS500M1. Others are bare tools, requiring you to supply your own power source. If you lack a battery system, a bundled kit offers immediate utility. For existing users, bare tools save cost and weight. Compare the accessory list carefully to determine the true value and readiness of each tool for your specific projects.
Frequently asked questions
Are 6-1/2-inch saws powerful enough for framing?
Yes, they handle standard 2x lumber effectively. Most models in this group offer a 50-degree bevel capacity and cutting depths suitable for dimensional lumber. Cordless options like the DEWALT DCS391P1 provide 5150 RPM speeds, while corded versions like the Makita SP6000J1 deliver continuous power without battery constraints.
Which 6-1/2-inch saw is best for track cutting?
The DEWALT DCS525B is ideal for precise straight cuts on sheet goods. It offers variable speed control and cuts within 1/32 of an inch. The Makita SP6000J1 also excels here, pairing a 12-amp motor with a 55-inch track for controlled plunge cutting and splinter-free results.
Do I need a battery for cordless 6-1/2-inch saws?
It depends on the model you choose. Some kits, like the CRAFTSMAN CMCS500M1 and BLACK+DECKER BLCS78E1, include batteries and chargers. Others, such as the Milwaukee 2833-20 and DEWALT DCS565BR, are sold as bare tools. You must already own compatible batteries for the bare-tool versions.
How heavy are these 6-1/2-inch circular saws?
Weight varies significantly by type and power source. The DEWALT DCS565BR is the lightest at 6.3 pounds. The Bosch CCS180B weighs 6.6 pounds. Heavier models include the Makita XPS01PTJ at 27.6 pounds due to its dual-battery system and plunge mechanism, and the Makita SP6000J1 at 16.5 pounds.
What is the maximum bevel capacity for these saws?
Most models in this list offer a 50-degree bevel range. This includes the DEWALT DCS391P1, DCS565P1, and DCS565BR, as well as the CRAFTSMAN CMCS500M1 and Bosch CCS180B. The Makita SP6000J1 provides a deeper 48-degree bevel cut, which is useful for complex joinery on thicker materials.
Can a 6-1/2-inch saw cut through thick hardwoods?
Corded models are best for thick hardwoods due to consistent power. The Makita SP6000J1 and DEWALT DWS520K both feature 12-amp motors for steady performance. Cordless options like the Milwaukee M18 and Makita XSH03Z rely on battery charge, which may affect performance during prolonged heavy cuts in dense wood.
Is a blade-left design better for right-handed users?
Yes, the Bosch CCS180B features a blade-left design that benefits right-handed users. It allows for better visibility of the cut line and easier alignment when cutting 2x lumber. This layout differs from standard blade-right models, making it a practical choice for specific framing and layout tasks.
Which 6-1/2-inch saw has the highest RPM?
The Makita XPS01PTJ reaches up to 6,300 RPM, offering high-speed cutting for plunge operations. The DEWALT DCS391P1 provides 5150 RPM for standard framing. The Milwaukee M18 operates at 3,500 RPM, prioritizing torque and durability over maximum speed for heavy-duty framing cuts.