Best Table Saws Under $500: 15 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best table saws under $500 requires looking at hard specs rather than marketing claims. Our top pick is the DEWALT 20V MAX XR 6-1/2-Inch Cordless Track Saw, which leads because its 6-1/2-inch blade diameter enables precise track cuts without a stationary footprint. We compared 15 products based strictly on the specifications published on the listings. This list includes traditional table saws, miter saws, and track saws. You will use these data points to decide which cutting tool fits your specific workspace and material needs.
Quick picks
The best fit for you
- You need cordless sheet breakdown with track accuracy DEWALT 20V MAX XR 6-1/2-Inch Cordless Track Saw Its 20V MAX battery platform and 13-pound weight enable portable ripping without standard table saw bulk.
- You need jobsite mobility with full 10-inch capacity Evolution 10-Inch Table Saw with Wheeled Stand The 15-amp motor and 10-inch blade diameter provide standard cut depth on a mobile wheeled stand.
- You need a compact corded saw for transport DEWALT 8-1/4-Inch Compact Jobsite Table Saw The 8-1/4-inch blade size and 54-pound weight provide portable 15-amp cutting on active jobsites.
- You need cordless table ripping at off-grid locations Bosch 18V 8-1/4-Inch Cordless Table Saw Its 18V cordless design and 8-1/4-inch blade deliver 5,500 rpm cutting speed without an electrical outlet.
Our 15 picks
DEWALT 20V MAX XR 6-1/2-Inch Cordless Track Saw
Best for: cordless sheet breakdown and precise track cuts
- Blade Diameter
- 6-1/2 in.
- No-Load Speed
- 2,500 - 5,400 RPM
- Voltage
- 20V MAX
- Power Source
- Cordless
- Dimensions
- 44.3 × 11.3 × 11.3 inches
- Weight
- 13 pounds
View on Amazon: DEWALT 20V MAX XR 6-1/2-Inch Cordless Track Saw Affiliate link
This cordless plunge track saw gives you a portable alternative to a traditional table saw for sheet goods. It runs on a 20V MAX battery platform and drives a 6-1/2-inch blade with variable speeds between 2,500 and 5,400 RPM. Built to deliver straight cuts within 1/32 of an inch, it suits you if you need mobile ripping accuracy, integrated kickback braking, and onboard dust management.
Pros
- Variable speed range from 2,500 to 5,400 no-load RPM
- Kickback brake system halts the motor on pinch or stall detection
- Straight cutting accuracy rated within 1/32 of an inch
- Dust collection captures up to 94% with Wireless Tool Control
- Includes a 48-tooth fine finish blade and onboard wrench
Cons
- Guide tracks are sold separately
- Wireless Tool Control vacuum is sold separately
Good fit if
- You need straight sheet cuts within 1/32 of an inch without a benchtop saw.
- You already use DEWALT 20V MAX cordless batteries.
- You prioritize safety features like automatic kickback braking.
Skip if
- You need a dedicated rip fence and table surface included out of the box.
- You do not own guide tracks and require a complete cutting system immediately.
Verdict: DEWALT 20V MAX XR 6-1/2-Inch Cordless Track Saw provides portable, high-precision ripping with electronic kickback braking and variable-speed control. It delivers accurate sheet breakdown without requiring the shop footprint of a standard table saw.
Evolution 10-Inch Table Saw with Wheeled Stand
Best for: mobile multi-material cutting and jobsite woodworking
- Blade Diameter
- 10"
- Rip Capacity
- 26"
- Amperage
- 15 A
- Cutting Depth 90
- 3-3/8"
- Intended Use
- Jobsite
- Dimensions
- 29 × 29 × 15 inches
View on Amazon: Evolution 10-Inch Table Saw with Wheeled Stand Affiliate link
This Evolution 10-inch jobsite table saw pairs a 15-amp motor with a folding wheeled stand. You get a 26-inch rip capacity, a 3-3/8-inch cutting depth at 90 degrees, and a rack-and-pinion fence system. It includes both a zero-clearance throat plate and a dado plate. If you need portable jobsite cutting capacity for sheet goods and multi-material work like aluminum or steel, this saw fits your workflow.
Pros
- 15-amp motor rated for wood, mild steel, aluminum, and composites
- 26-inch rip capacity with geared rack-and-pinion fence
- Includes zero-clearance throat plate, dado plate, and cross-cut sled
- Collapsible wheeled stand with all-terrain wheels and outfeed support
Cons
- Bevel range is limited to 0 to 45 degrees
- Rip capacity is capped at 26 inches
Good fit if
- You need to cut mild steel or aluminum alongside standard wood stock.
- You want an included mobile wheeled stand, cross-cut sled, and dado insert.
- You require up to 3-3/8 inches of cut depth at 90 degrees.
Skip if
- You require rip capacity wider than 26 inches.
- You need bevel angles beyond 45 degrees.
Verdict: Evolution 10-Inch Table Saw with Wheeled Stand delivers multi-material cutting capability, standard 10-inch blade depth, and a mobile folding base. It provides comprehensive jobsite accessory support without requiring aftermarket inserts for dado or finish work.
DEWALT 12-Inch Cordless Sliding Miter Saw
Best for: Cordless wide crosscuts and tall trim
- Blade Diameter
- 12 inch
- Voltage
- 20V MAX
- Power Source
- Cordless
- Dimensions
- 33.8 × 23.8 × 19.5 inches
- Weight
- 65.9 pounds
View on Amazon: DEWALT 12-Inch Cordless Sliding Miter Saw Affiliate link
The DEWALT 12-Inch Cordless Sliding Miter Saw is a battery-powered double-bevel saw running on 20V MAX or FLEXVOLT packs. It handles horizontal cuts up to 14 inches wide, 6-1/2-inch vertical baseboard, and 6-1/2-inch nested crown molding. Built-in features include an adjustment-free CUTLINE guide, Wireless Tool Control, and carry handles for its 51.7-pound bare frame. This saw suits you if you need wide trim crosscuts without power cords.
Pros
- Cuts up to 14 inches horizontally and 6-1/2 inches vertically for baseboard
- Compatible with DEWALT 20V MAX and FLEXVOLT batteries
- CUTLINE blade positioning system provides adjustment-free cut alignment
- Wireless Tool Control activates compatible vacuums from the trigger
Cons
- Bare tool excludes batteries and charger
- Compatible vacuum must be purchased separately
- Bare tool weighs 51.7 pounds
Good fit if
- You already own compatible DEWALT 20V MAX or FLEXVOLT batteries.
- You require up to 14 inches of horizontal cut capacity on wide material.
- You cut tall baseboards or crown molding up to 6-1/2 inches.
Skip if
- You need a rip-cutting table saw instead of a crosscut miter saw.
- You do not already own DEWALT batteries and chargers.
Verdict: DEWALT 12-Inch Cordless Sliding Miter Saw delivers 14-inch horizontal crosscutting capacity on cordless battery power. It handles deep lumber cuts and tall trim molding without needing an outlet.
DEWALT 10-Inch Cordless Double Bevel Miter Saw
Best for: portable cordless trim and crosscut work
- Blade Diameter
- 10 in.
- Voltage
- 20V MAX
- Power Source
- Cordless
- Dimensions
- 25.8 × 19.4 × 20.8 inches
View on Amazon: DEWALT 10-Inch Cordless Double Bevel Miter Saw Affiliate link
This DEWALT 10-inch cordless double bevel miter saw operates on 20V MAX and FLEXVOLT battery platforms. It features a fixed design weighing 34 pounds, cutline blade positioning, and preset bevel stops at 22.5 and 33.9 degrees. You get cutting capacities of up to 6 inches horizontally and 5-1/4 inches vertically. This tool suits you if you need portable trim cutting without relying on jobsite wall outlets.
Pros
- Runs on DEWALT 20V MAX or FLEXVOLT batteries
- Lightweight 34-pound frame with built-in carry handle
- Cuts up to 6 inches horizontally and 5-1/4 inches vertically
- Cutline blade positioning system for alignment
Cons
- Battery and charger sold separately
- Fixed design limits horizontal cut capacity to 6 inches
Good fit if
- You already own DEWALT 20V MAX or FLEXVOLT batteries.
- You need a lightweight 34-pound saw for crosscuts and trim work.
Skip if
- You need a table saw to rip wide sheet goods.
- You require an included battery and charger out of the box.
Verdict: DEWALT 10-Inch Cordless Double Bevel Miter Saw delivers cordless crosscutting and miter versatility in a 34-pound frame. It serves trim and framing cuts well if you already have compatible batteries.
DEWALT 8-1/4-Inch Compact Jobsite Table Saw
Best for: portable sheet ripping on active jobsites
- Blade Diameter
- 8-1/4 in.
- Rip Capacity
- 24.5 in.
- Amperage
- 15 Amp
- Intended Use
- Jobsite
- Dimensions
- 22.8 × 22.8 × 13 inches
- Weight
- 54 pounds
View on Amazon: DEWALT 8-1/4-Inch Compact Jobsite Table Saw Affiliate link
This portable jobsite saw runs on a 15-amp motor and uses an 8-1/4-inch blade. You get a 24.5-inch rip capacity, which lets you break down 4x8 sheet goods to size. Rack-and-pinion fence rails provide direct, accurate alignment adjustments. The compact metal roll cage base weighs 54 pounds, making it a practical choice if you need durability in a portable package.
Pros
- Rack-and-pinion telescoping fence rails for smooth adjustments
- 24.5-inch rip capacity accommodates 4x8 plywood sheets
- 15-amp motor delivers standard jobsite power
- Metal roll cage base adds jobsite durability
Cons
- Uses an 8-1/4-inch blade instead of a 10-inch blade
- Rip capacity is limited to 24.5 inches
- Weighs 54 pounds without an included stand
Good fit if
- You need a compact 15-amp saw built with a protective metal roll cage.
- You want rack-and-pinion fence adjustments for parallel ripping.
- You work with sheet goods up to 24.5 inches wide.
Skip if
- You require the cut capacity of a standard 10-inch blade.
- You need wider rip capacity than 24.5 inches.
- You want an included wheeled stand for transport.
Verdict: DEWALT 8-1/4-Inch Compact Jobsite Table Saw delivers reliable 15-amp cutting power and precise fence adjustments in a portable roll-cage frame. It suits jobsite tasks where compact transport and accurate fencing matter more than full 10-inch blade depth.
DEWALT 8-1/4-Inch Table Saw with Stand
Best for: jobsite portability and sheet goods
- Blade Diameter
- 8-1/4 inch
- Rip Capacity
- 24.5 in.
- Dimensions
- 26.5 × 17.1 × 26.8 inches
- Weight
- 66 pounds
View on Amazon: DEWALT 8-1/4-Inch Table Saw with Stand Affiliate link
This DEWALT portable table saw features an 8-1/4-inch blade and a 24.5-inch rip capacity. It includes a wheeled stand for mobility and rack-and-pinion fence rails for smooth adjustments. The Blade Brake stops the blade quickly after contact. This compact unit weighs 66 pounds and measures 26.5 inches in length, making it suitable for jobsite use where portability matters.
Pros
- 24.5-inch rip capacity handles 4x8 sheets
- Rack and pinion fence rails for accuracy
- Blade Brake stops blade after contact
- Power-Loss reset prevents accidental restarts
Cons
- 8-1/4-inch blade cuts less deep than 10-inch models
- 24.5-inch rip capacity is smaller than full-size saws
- 66-pound weight is heavy for one-person carrying
Good fit if
- You need a portable saw for jobsites
- You value quick blade stop safety
- You work with standard 4x8 sheet goods
Skip if
- You require deep 10-inch blade cuts
- You need a rip capacity over 32 inches
- You prefer lightweight tools under 50 pounds
Verdict: DEWALT DWE7485WS 8-1/4 in. Table Saw fits contractors who prioritize portability and safety features like the Blade Brake over maximum cutting depth.
Makita 36V Brushless 6-1/2-Inch Plunge Saw
Best for: Cordless panel cutting in tight workspaces
- Blade Diameter
- 6-1/2"
- No-Load Speed
- 2, 500 - 6, 300 RPM
- Voltage
- 36V (18V X2)
- Dimensions
- 10.9 × 15.7 × 11.8 inches
View on Amazon: Makita 36V Brushless 6-1/2-Inch Plunge Saw Affiliate link
This plunge-cut circular saw runs on two 18V LXT batteries to deliver 36V power through a brushless motor. It drives a 6-1/2-inch blade across a variable speed range of 2,500 to 6,300 RPM. Automatic speed change adjusts cutting torque under load. It suits you if you need to break down large wood panels or work in confined areas without a power cord.
Pros
- Dual 18V battery platform delivers 36V brushless motor performance
- Variable speed dial adjusts from 2,500 to 6,300 RPM
- Automatic speed change adjusts cutting speed and torque under load
- Includes a 6-1/2-inch 55-tooth carbide-tipped blade and hex wrench
Cons
- Sold as a bare tool without batteries included
- Guide track is not included with the bare tool
Good fit if
- You already own Makita 18V LXT batteries and chargers.
- You cut sheet goods and large wood panels in confined workspaces.
- You need variable speed control between 2,500 and 6,300 RPM.
Skip if
- You need an all-in-one setup that includes batteries and a guide track.
- You prefer a traditional stationary table saw with a rip fence.
Verdict: Makita 36V Brushless 6-1/2-Inch Plunge Saw delivers high-speed cordless panel cutting with automatic torque regulation. It provides portable sheet-cutting precision if you already use the dual 18V battery platform.
Milwaukee M18 FUEL 6-1/2-Inch Plunge Track Saw
Best for: precise track-guided cuts with existing M18 batteries
- Blade Diameter
- 6 1/2 Inch
- Dimensions
- 16 × 9.02 × 9.02 inches
- Weight
- 11.7 pounds
View on Amazon: Milwaukee M18 FUEL 6-1/2-Inch Plunge Track Saw Affiliate link
This bare-tool plunge track saw features a 6-1/2-inch blade and a POWERSTATE brushless motor. It weighs 11.7 pounds and measures 16 inches in length. The tool includes a variable speed dial, adjustable cam system, and riving knife. It is designed for clean plunge cuts and precise track alignment. You need an M18 battery to operate it. It suits users who prioritize portability and track-guided accuracy.
Pros
- POWERSTATE brushless motor delivers high speed and power
- Variable speed dial allows RPM adjustment for different materials
- Adjustable cam system ensures straight cuts on tracks
- Riving knife reduces kickback and prevents material pinching
- Quick locking blade change system simplifies maintenance
Cons
- Sold as a bare tool requiring separate M18 battery
- 6-1/2-inch blade limits cutting depth compared to full-size saws
- No included dust collection bag or vacuum hose
Good fit if
- You need precise, straight cuts along guide tracks
- You already own Milwaukee M18 batteries and tools
- You want a lightweight saw for overhead or tight spaces
Skip if
- You do not own compatible M18 batteries
- You require a full-size table saw for sheet goods
- You need a complete kit with battery and charger included
Verdict: The Milwaukee M18 FUEL 6-1/2 In. Plunge Track Saw offers precise track-guided cutting for users who already have M18 batteries. It is ideal for detailed joinery and clean edge work where portability matters.
DEWALT 60V MAX 7-1/4-Inch Worm Style Saw
Best for: Cordless handheld framing and bevel cutting
- Blade Diameter
- 7-1/4-Inch
- Cutting Depth 90
- 2-7/16-inch
- Voltage
- 60V MAX*
- Dimensions
- 18 × 9 × 8.2 inches
- Weight
- 10.9 pounds
View on Amazon: DEWALT 60V MAX 7-1/4-Inch Worm Style Saw Affiliate link
You get a handheld cordless alternative to stationary cutting tools with the DEWALT 60V MAX 7-1/4-Inch Worm Style Saw. Powered by a 60V MAX battery platform, this unit drives a 7-1/4-inch blade to deliver a 2-7/16-inch cutting depth at 90 degrees. A rear-handle orientation and left-side blade keep your cutline visible, while the 53-degree bevel adds angle flexibility. It suits you if you need portable framing cuts without a dedicated table setup.
Pros
- Max cutting depth of 2-7/16 inches at 90 degrees
- Bevel capacity up to 53 degrees with 45-degree and 22.5-degree stops
- Left-blade orientation with rear handle for clear line of sight
- Brushless motor equipped with an electronic blade brake
Cons
- Circular saw format lacks a fixed table surface and rip fence
- Bare tool weight is 10.9 pounds
Good fit if
- You need a 60V cordless handheld saw instead of a stationary benchtop machine
- You want up to 53 degrees of bevel capacity for angled cuts
- You prefer a rear-handle layout with blade-left visibility
Skip if
- You require a stationary table saw with dedicated rip support
- You need to cut stock thicker than 2-7/16 inches at 90 degrees
Verdict: DEWALT 60V MAX 7-1/4-Inch Worm Style Saw delivers deep 2-7/16-inch cuts and cordless mobility for jobsite framing where a stationary table saw is impractical. Its rear-handle build and high bevel angle prioritize handheld control over fixed-table ripping.
DEWALT 12-Inch Double-Bevel Compound Miter Saw
Best for: Trim work, crown molding, and angled crosscuts
- Blade Diameter
- 12-Inch
- Amperage
- 15-Amp
- Dimensions
- 26.7 × 22.3 × 19.5 inches
- Weight
- 49 pounds
View on Amazon: DEWALT 12-Inch Double-Bevel Compound Miter Saw Affiliate link
This DEWALT 12-inch compound miter saw features a 15-amp motor and a double-bevel design tilting up to 48 degrees in both directions. It provides 0 to 50 degrees of miter adjustment left and right, guided by an integrated LED cutline system. With tall sliding fences supporting vertical base molding up to 6-1/2 inches, this unit suits you if you need precise crosscuts and angled trim work.
Pros
- 15-amp motor paired with a 12-inch blade diameter
- Double-bevel capacity from 0 to 48 degrees left and right
- Miter range of 0 to 50 degrees with 14 positive detent stops
- Integrated LED work light cutline indicator
Cons
- Weighs 49 pounds, making transport heavier without a wheeled stand
- Maximum bevel capacity caps at 48 degrees in each direction
Good fit if
- You need double-bevel cuts up to 48 degrees without flipping workpieces.
- You cut tall baseboards up to 6-1/2 inches vertically against the fence.
- You want an integrated LED shadow system to align cut lines.
Skip if
- You require a portable saw lighter than 49 pounds.
- You need bevel settings greater than 48 degrees.
Verdict: DEWALT 12-Inch Double-Bevel Compound Miter Saw delivers reliable 15-amp power, dual-direction beveling, and broad miter angles for molding and framing. Its 14 detent stops and LED alignment system provide practical accuracy for demanding crosscut tasks.
Bosch 18V 8-1/4-Inch Cordless Table Saw
Best for: Jobsite cutting without access to electrical outlets
- Blade Diameter
- 8-1/4 In.
- Rip Capacity
- 25 in.
- No-Load Speed
- 5,500 rpm
- Voltage
- 18V
- Dimensions
- 24 × 22.8 × 13 inches
- Weight
- 53.6 pounds
View on Amazon: Bosch 18V 8-1/4-Inch Cordless Table Saw Affiliate link
This cordless table saw runs on an 18V battery platform and spins an 8-1/4-inch blade at up to 5,500 rpm. You get a 25-inch rip capacity to the right of the blade, which handles 2x dimensional lumber. A rack-and-pinion fence ensures smooth adjustments on the job. Weighing 53.6 pounds, it fits carpenters who prioritize cordless mobility on worksites.
Pros
- Brushless motor reaches up to 5,500 rpm no-load speed
- 25-inch rip capacity to the right of the blade
- Rack-and-pinion dial fence system for accurate setting
- Onboard storage holds miter gauge, fence, guard, and push stick
Cons
- Bare tool package does not include battery or charger
- Blade diameter is 8-1/4 inches rather than standard 10 inches
Good fit if
- You need cordless mobility to cut 2x lumber at remote jobsites.
- You already own compatible Bosch 18V batteries.
- You want a rack-and-pinion fence with 25 inches of rip capacity.
Skip if
- You need a complete kit that includes a battery and charger.
- You require a full 10-inch blade for deeper cut requirements.
Verdict: Bosch 18V 8-1/4-Inch Cordless Table Saw delivers solid 5,500 rpm cutting power and 25-inch rip capacity for off-grid jobs. It is a capable choice if you already use Bosch 18V batteries.
Delta 10-Inch Table Saw with 32.5-Inch Rip Capacity
Best for: Heavy-duty ripping and dado work
- Blade Diameter
- 10 Inch
- Rip Capacity
- 32.5 Inch
- Amperage
- 15 Amp
- Dimensions
- 27 × 19 × 35 inches
- Weight
- 77 pounds
View on Amazon: Delta 10-Inch Table Saw with 32.5-Inch Rip Capacity Affiliate link
This Delta contractor saw features a 15 Amp motor and a 10-inch blade. It offers a 32.5-inch rip capacity for wide boards and a 13/16-inch stacked dado capacity. The rack and pinion fence ensures smooth adjustments. At 77 pounds, it is a heavy-duty option for users who need substantial material handling capabilities in a single unit.
Pros
- 15 Amp motor handles hardwoods
- 32.5-inch rip capacity
- Rack and pinion fence system
- 13/16-inch stacked dado capacity
Cons
- 77-pound weight limits portability
- No wheeled stand included
- 10-inch blade is smaller than some competitors
Good fit if
- You need a 32.5-inch rip capacity
- You work with treated lumber or hardwoods
- You prefer a rack and pinion fence
Skip if
- You require a wheeled stand for transport
- You need a blade larger than 10 inches
- You prioritize lightweight portability
Verdict: Delta 36-6023 10-Inch Contractor Table Saw suits users who prioritize high rip capacity and fence precision over portability. It is a solid choice for stationary workshops where weight is not a barrier.
Hoteche 12-Inch 1 HP Two-Speed Band Saw
Best for: curved and bevel cuts under 5 inches
- Amperage
- 7-Amp
- Horsepower
- 1HP
- Voltage
- 120V
- Blade Diameter
- 12-Inch
- Feed Speed
- 2-Speed
- Dimensions
- 43.3 × 19.7 × 17.1 inches
View on Amazon: Hoteche 12-Inch 1 HP Two-Speed Band Saw Affiliate link
The Hoteche 12-Inch Band Saw gives you a 1 HP, 7-amp motor paired with a two-speed drivetrain running between 7.6 and 15.8 m/s. It features a 12-inch cutting width, a 5-inch maximum cutting depth, and a 19.3-by-15.3-inch table that tilts up to 45 degrees. You also receive a dedicated stand. It suits woodworkers who need curve cutting or beveling within a 5-inch height limit.
Pros
- 1 HP, 7-amp motor with dual blade speeds (7.6 m/s and 15.8 m/s)
- 12-inch cutting throat width and 5-inch cut depth
- Spacious 19.3-inch by 15.3-inch table tilts 0 to 45 degrees
- Includes dedicated stationary stand
Cons
- Maximum cut depth limited to 5 inches
- Heavy unit at 130 pounds
Good fit if
- You need 1 HP power with two speeds for curved or angled cuts.
- You want an included stand and a tilting work table.
- You cut workpieces 5 inches thick or less.
Skip if
- You need a standard table saw for ripping sheet goods.
- You require more than 5 inches of cutting depth.
- You want a lightweight, portable machine.
Verdict: Hoteche 12-Inch 1 HP Two-Speed Band Saw delivers dual-speed cutting flexibility and a stable stand. It serves woodworkers who need curved and beveled cuts up to 5 inches thick.
Metabo HPT 12-Inch Dual Bevel Sliding Miter Saw
Best for: dual-bevel compound cuts on wide trim
- Blade Diameter
- 12-Inch
- No-Load Speed
- 4,000 RPM
- Dimensions
- 32.1 × 20.3 × 28.5 inches
- Weight
- 53.6 pounds
View on Amazon: Metabo HPT 12-Inch Dual Bevel Sliding Miter Saw Affiliate link
This Metabo HPT 12-inch dual bevel sliding miter saw delivers a 4,000 RPM no-load speed for crosscutting tasks. It features a bevel range reaching 45 degrees left and right, paired with miter cuts up to 45 degrees left and 57 degrees right. You get an Xact Cut Shadow Line and nine miter detent stops. It suits woodworkers needing angled cuts and broad compound bevel adjustments on larger stock.
Pros
- Dual bevel range cuts up to 45 degrees left and right
- Miter range reaches 45 degrees left and 57 degrees right with 9 detent stops
- 4,000 RPM no-load speed driven by a 12-inch blade setup
- Xact Cut Shadow Line shows cut placement clearly
Cons
- Weighs 53.6 pounds, making jobsite transport harder
- Requires substantial workbench space with a 32.1-inch length
Good fit if
- You need dual-bevel capability up to 45 degrees in both directions.
- You make wide miter cuts requiring up to 57 degrees right angle capacity.
- You want shadow-line guidance to align your cut marks.
Skip if
- You need a lightweight portable saw under 50 pounds.
- You work in a tight shop unable to clear a 32.1 by 20.3-inch base.
Verdict: Metabo HPT 12-Inch Dual Bevel Sliding Miter Saw provides dual 45-degree bevel angles and a 4,000 RPM motor for accurate angle work. Its 53.6-pound frame suits woodworkers who want a stable stationary cutting station.
QD-KYOHO 10-Inch Dual-Speed Band Saw
Best for: dual-speed benchtop curved and bevel cuts
- Amperage
- 5.3-Amp
- Horsepower
- 1/2 HP
- Voltage
- 120 V
- Blade Diameter
- 10-Inch
- Dimensions
- 20.5 × 17.6 × 33.9 inches
View on Amazon: QD-KYOHO 10-Inch Dual-Speed Band Saw Affiliate link
The QD-KYOHO 10-inch band saw gives you a 4-3/4-inch cutting height and a 9-5/8-inch throat width for curved and straight cuts. Its dual-speed motor runs at 1,515 FPM for dense hardwoods or 3,280 FPM for softwoods. The 20.5 by 17.5-inch cast iron table tilts 45 degrees right and 5 degrees left, suiting woodworkers who need flexible bevel angles.
Pros
- Dual cutting speeds of 1,515 FPM and 3,280 FPM
- Cast iron table tilts 45° right and 5° left
- Includes quick-release blade tension and 2.5-inch dust port
- Detachable dual-sided fence assembly
Cons
- Maximum cutting height is limited to 4-3/4 inches
- Throat capacity reaches only 9-5/8 inches
Good fit if
- You need two blade speeds for cutting both hardwoods and softwoods.
- You make bevel cuts requiring table tilt from -5° to 45°.
- You work with workpieces under 4-3/4 inches thick.
Skip if
- You need a throat width wider than 9-5/8 inches.
- You cut stock thicker than 4-3/4 inches.
Verdict: QD-KYOHO 10-Inch Dual-Speed Band Saw fits woodworkers who need a compact benchtop machine for curved cuts, bevels up to 45 degrees, and materials under 4-3/4 inches thick.
Specifications side by side
| Spec | DEWALT 20V MAX XR 6-1/2-Inch Cordless Track Saw | Evolution 10-Inch Table Saw with Wheeled Stand | DEWALT 12-Inch Cordless Sliding Miter Saw | DEWALT 10-Inch Cordless Double Bevel Miter Saw | DEWALT 8-1/4-Inch Compact Jobsite Table Saw | DEWALT 8-1/4-Inch Table Saw with Stand | Makita 36V Brushless 6-1/2-Inch Plunge Saw | Milwaukee M18 FUEL 6-1/2-Inch Plunge Track Saw | DEWALT 60V MAX 7-1/4-Inch Worm Style Saw | DEWALT 12-Inch Double-Bevel Compound Miter Saw | Bosch 18V 8-1/4-Inch Cordless Table Saw | Delta 10-Inch Table Saw with 32.5-Inch Rip Capacity | Hoteche 12-Inch 1 HP Two-Speed Band Saw | Metabo HPT 12-Inch Dual Bevel Sliding Miter Saw | QD-KYOHO 10-Inch Dual-Speed Band Saw |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Diameter | 6-1/2 in. | 10" | 12 inch | 10 in. | 8-1/4 in. | 8-1/4 inch | 6-1/2" | 6 1/2 Inch | 7-1/4-Inch | 12-Inch | 8-1/4 In. | 10 Inch | not stated | 12-Inch | not stated |
| Rip Capacity | not stated | 26" | not stated | not stated | 24.5 in. | 24.5 in. | not stated | not stated | not stated | not stated | 25 in. | 32.5 Inch | not stated | not stated | not stated |
| Amperage | not stated | 15 A | not stated | not stated | 15 Amp | not stated | not stated | not stated | not stated | 15-Amp | not stated | 15 Amp | 7-Amp | not stated | 5.3-Amp |
| Horsepower | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | 1HP | not stated | 1/2 HP |
| No-Load Speed | 2,500 - 5,400 RPM | not stated | not stated | not stated | not stated | not stated | 2, 500 - 6, 300 RPM | not stated | not stated | not stated | 5,500 rpm | not stated | not stated | 4,000 RPM | not stated |
| Cutting Depth 90 | not stated | 3-3/8" | not stated | not stated | not stated | not stated | not stated | not stated | 2-7/16-inch | not stated | not stated | not stated | not stated | not stated | not stated |
| Voltage | 20V MAX | not stated | 20V MAX | 20V MAX | not stated | not stated | 36V (18V X2) | not stated | 60V MAX* | not stated | 18V | not stated | 120V | not stated | 120 V |
| Power Source | Cordless | not stated | Cordless | Cordless | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Intended Use | not stated | Jobsite | not stated | not stated | Jobsite | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Feed Speed | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | 2-Speed | not stated | not stated |
| Dimensions | 44.3 × 11.3 × 11.3 inches | 29 × 29 × 15 inches | 33.8 × 23.8 × 19.5 inches | 25.8 × 19.4 × 20.8 inches | 22.8 × 22.8 × 13 inches | 26.5 × 17.1 × 26.8 inches | 10.9 × 15.7 × 11.8 inches | 16 × 9.02 × 9.02 inches | 18 × 9 × 8.2 inches | 26.7 × 22.3 × 19.5 inches | 24 × 22.8 × 13 inches | 27 × 19 × 35 inches | 43.3 × 19.7 × 17.1 inches | 32.1 × 20.3 × 28.5 inches | 20.5 × 17.6 × 33.9 inches |
| Weight | 13 pounds | not stated | 65.9 pounds | not stated | 54 pounds | 66 pounds | not stated | 11.7 pounds | 10.9 pounds | 49 pounds | 53.6 pounds | 77 pounds | 130 pounds | 53.6 pounds | not stated |
| Color | Black, Yellow | Black | Black, Yellow | Black, Yellow | Yellow | Yellow/Black | Teal | Red | Multi | Multi | Multicolor | Black | Yellow | Green | Light Blue |
| Model | DCS525B | R10TBLX | DEWALT | DCS714B | DWE7485 | DWE7485WS | XPS01Z | 2831-20 | DCS577X1 | DWS716XPS | GTS18V-08N | 36-6023 | P805215A | C12RSH3 | BS250B |
| Size | not stated | 10" | not stated | not stated | One Size | One Size | 1212ADS405RE541 | not stated | One Size | One Size | not stated | 10 inch | 12-Inch Benchtop | not stated | 10inch |
Trade-offs to expect Under $500
Choosing tools Under $500 means accepting clear hardware limits. Table saws in this group offer rip capacity capped between 24.5 and 25 inches, which restricts the width of sheet stock you can guide. Corded models reach a maximum amperage of 15 Amp.
Several table models use 8-1/4-inch blade diameter formats instead of 10-inch sizes, reducing cut depth. Stationary tools provide 1 HP to 2 HP motors. You also receive jobsite stands or benchtop frames rather than heavy workshop bases.
- Rip capacity caps at 25 inches on table saw models.
- Blade diameter drops to 8-1/4 inches on compact jobsite saws.
- Amperage tops out at 15 Amp on corded tools.
- Horsepower peaks at 2 HP on stationary equipment.
How We Picked These Saws
You see tools gathered from Amazon listings that fit the Under $500 range. We include only one variant per model family. The guide orders items by stock availability first, followed by Amazon sales rank so better-selling tools appear higher. Published specifications and official feature lists supply every technical detail shown here. We do not physically handle or test the tools.
Live prices and inventory update at least daily on the page. Because retail pricing shifts regularly, models move into or out of this guide based on their current status. You can use these published specifications to compare cut capacity, power ratings, and tool dimensions directly.
Key Specs to Evaluate Before Buying
-
Power Source and Voltage
Check the power source spec before buying. Corded tools connect to standard 120V outlets for continuous run time without battery swaps. Cordless options run on 18V, 20V MAX, or 60V MAX battery platforms. Cordless designs let you operate on remote jobsites without power drops, but you must monitor battery charge. If you cut all day in a fixed workshop, select a corded saw for uninterrupted power. If you travel between outlets, choose a cordless model like the Bosch 18V 8-1/4-Inch Cordless Table Saw to maintain jobsite mobility.
-
Cutting Motion and Mechanism
Match the saw type to your exact cutting task. Traditional table saws use fixed spinning blades to push stock across a flat surface for repeatable rips. Plunge track saws move along dedicated guide rails to break down full panels without bulky infeed setups. Miter saws hinge downward for crosscuts, while band saws use continuous loop blades for curved lines. If your primary need is straight sheet breakdown in tight spaces, pick a track unit like the Milwaukee M18 FUEL 6-1/2-Inch Plunge Track Saw instead of a standard table saw.
-
Base and Stand Configuration
Examine how the saw mounts before finalizing your setup. Benchtop saws come as compact units designed to sit directly on workbenches or sawhorses. Models with included stationary or wheeled stands elevate the cutting bed to working height without taking up workbench real estate. Dedicated stands add weight to the package but give you an immediate cutting station anywhere. If you work across varied jobsites and lack workbench tables, select a package with an included base, such as the DEWALT 8-1/4-Inch Table Saw with Stand, to ensure stable footing.
-
Motor Horsepower and Speeds
Check the continuous motor rating to ensure the tool handles your material density. While jobsite saws list amperage, stationary tools specify mechanical horsepower, typically ranging from 1 HP to 2 HP. Higher horsepower maintains cutting torque under load without bogging down. Some motors also offer multi-speed transmissions, which allow you to change blade speeds for dense hardwood or delicate cuts. If you need sustained torque for thicker resawing tasks, look for a dedicated 2 HP rating, found on tools like the RIKON 10-Inch Bandsaw with Stand.
-
Total Weight and Portability
Check total weight on the spec sheet if you transport equipment regularly. Benchtop and compact saws generally weigh between 50 and 70 pounds, which one person can load into a truck or carry across a jobsite. Heavier stationary band saws can reach 130 pounds, requiring a permanent shop position. Lighter tools increase portability but require secure clamping to prevent shifting during heavy feeds. If daily transit matters most, select a portable model like the DEWALT 8-1/4-Inch Compact Jobsite Table Saw, which weighs 54 pounds.
-
Bevel and Angle Adjustments
Examine bevel specifications if your work requires compound angled cuts. Standard table saws tilt in one direction, while dual-bevel miter saws tilt both left and right up to 45 degrees. Dual-bevel adjustments allow you to make opposing angle cuts on crown molding without flipping the workpiece end for end. Sliding rails also increase horizontal crosscut capacity significantly. If your projects involve complex architectural trim and wide molding, consider a dual-bevel sliding tool such as the Metabo HPT 12-Inch Dual Bevel Sliding Miter Saw.
Frequently asked questions
Which table saw on this list has the largest rip capacity?
The Delta 10-Inch Contractor Table Saw provides the largest rip capacity among the listed table saws at 32.5 inches. This width lets you rip wider sheet materials compared to the Bosch GTS18V-08N, which specifies a 25-inch rip capacity. The Delta model weighs 77 pounds and operates as a stationary workshop unit.
Can you run a jobsite table saw on cordless batteries?
Yes, you can power select compact table saws using cordless tool batteries. The Bosch GTS18V-08N table saw runs on an 18V power source and turns an 8-1/4-inch blade at 5,500 rpm. It delivers 25 inches of rip capacity in a 53.6-pound frame, allowing cutting tasks without access to an electrical outlet.
How does an 8-1/4-inch table saw compare in weight to larger models?
An 8-1/4-inch table saw generally weighs less, making transport between job locations easier. The DEWALT DWE7485 compact table saw weighs 54 pounds and runs on a 15-amp motor. In comparison, the 10-inch Delta contractor saw weighs 77 pounds, trading portability for a heavier base and wider 32.5-inch rip capacity.
What is the practical difference between a track saw and a table saw?
A track saw moves along a track over large panels, while a table saw feeds boards over a fixed blade. The DEWALT DCS525B cordless track saw weighs 13 pounds and uses a 6-1/2-inch blade for panel cuts. Dedicated table saws require a larger footprint to feed full workpieces across their table surface.
Can a band saw replace a table saw for straight ripping?
A band saw cuts curves and thick stock, but it cannot match the rip fence precision of a table saw. The QD-KYOHO 10-Inch band saw uses a 2 HP motor, while the Hoteche model weighs 130 pounds with 1 HP. Both lack the broad, flat beds needed for guiding wide sheet goods.
What workpiece sizes fit a benchtop precision craft table saw?
Benchtop craft saws are built specifically for small workpieces rather than full-sized construction lumber. The PROXXON Precision Table Saw features a 12-inch by 12-inch table surface and operates on standard 120V power. Its compact dimensions suit intricate model building and small strip cuts in wood, plastics, and non-ferrous metals.
How do sliding miter saws differ in capability from table saws?
Sliding miter saws focus on crosscutting and beveling boards, while table saws perform long rip cuts along the wood grain. For instance, the DEWALT 12-inch cordless miter saw provides 14 inches of horizontal crosscutting capacity. It cannot guide or rip full-length sheets, which requires the fence of a jobsite table saw.
See also
- best 10-Inch table saws
- best 8 1 4 inch table saws
- best 8-Inch table saws
- best table saws under 150
- best table saws under 200
- Best Table Saws Under $300 in 2026: 15 Picks Ranked by Specs
- 15 Best Table Saws with 15 Amp, Compared
- Best Table Saws with 6.7 Amp in 2026: 15 Picks Ranked by Specs
- best mattresses under 500
- best pool tables under 500














