Best Table Saws with 18V: 15 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best table saws with 18V power requires balancing portability, blade size, and cutting capacity. We compared 15 tools based strictly on the specifications published on their manufacturer listings.
The Makita 18V X2 Brushless 7-1/4-Inch Rear Handle Saw takes the top position because its dual-battery configuration delivers 36V power alongside a 2-9/16-inch cut capacity. This guide helps you decide which blade diameter, tool weight, and cordless form factor best fit your current battery platform and cutting requirements.
Quick picks
The best fit for you
- You need maximum cutting depth from dual 18V batteries Makita 18V X2 Brushless 7-1/4-Inch Rear Handle Saw This saw uses two 18V batteries to deliver a 2-9/16-inch cut capacity with a 7-1/4-inch blade.
- You want the lightest cordless circular saw on 18V Makita 18V Sub-Compact 6-1/2-Inch Circular Saw Its 4-pound body delivers 5,000 RPM and a 2-1/4-inch cut depth using a 6-1/2-inch blade.
- You need an 18V saw for miter cuts RYOBI 18V Cordless 7-1/4-Inch Compound Miter Saw This compound miter saw operates on 18V battery power and weighs 19 pounds with a 7-1/4-inch blade.
- You want the highest stroke speed for curved cuts Bosch 18V Brushless Barrel-Grip Jig Saw It delivers 3,800 strokes per minute across four pendulum stages in a 4.35-pound body.
Our 15 picks
Makita 18V X2 Brushless 7-1/4-Inch Rear Handle Saw
Best for: deep single-pass cutting with dual 18V batteries
- Voltage
- 18V (what this guide is about)
- Blade Diameter
- 7-1/4"
- No-Load Speed
- 5,100 RPM
- Cutting Depth 90
- 2-9/16”
- Dimensions
- 18.8 × 8.9 × 12 inches
- Weight
- 12.1 pounds
View on Amazon: Makita 18V X2 Brushless 7-1/4-Inch Rear Handle Saw
This cordless rear-handle circular saw runs on two 18V LXT batteries to deliver 36V power to a brushless motor spinning at 5,100 RPM. You get a 7-1/4-inch blade diameter with a 2-9/16-inch cutting depth at 90 degrees, allowing single-pass cuts through 3X material. It suits you if you need portable framing capacity, an electric brake, and bevel settings up to 53 degrees on an 18V platform.
Pros
- 2-9/16-inch cutting depth at 90 degrees cuts 3X material in one pass
- Dual 18V battery design provides 36V power and 5,100 RPM
- 0 to 53-degree bevel capacity with positive stops at 22.5, 45, and 53 degrees
- Built-in electric brake
Cons
- Tool only configuration excludes batteries and charger
- Requires two 18V batteries simultaneously to operate
- Bare tool weighs 12.1 pounds
Good fit if
- You already own Makita 18V LXT batteries
- You need to cut 3X material in a single pass at 90 degrees
- You want bevel cutting up to 53 degrees with positive stops
Skip if
- You want a saw that weighs under 12 pounds
- You prefer a tool that runs on a single 18V battery
- You need a kit that includes batteries in the box
Verdict: Makita 18V X2 Brushless 7-1/4-Inch Rear Handle Saw delivers 36V power and a 2-9/16-inch cut capacity using two 18V batteries. It is a capable choice if you already own Makita 18V batteries and need deep cutting depth.
Makita 18V Brushless 6-1/2-Inch Cordless Circular Saw
Best for: lightweight 18V cordless circular cutting
- Voltage
- 18V (what this guide is about)
- Blade Diameter
- 6-1/2"
- No-Load Speed
- 5,000 RPM
- Power Source
- Cordless
- Dimensions
- 14 × 7.8 × 10.4 inches
- Weight
- 7 pounds
View on Amazon: Makita 18V Brushless 6-1/2-Inch Cordless Circular Saw
This Makita 6-1/2-inch cordless circular saw operates on an 18V battery platform and features an electronically controlled brushless motor running at 5,000 RPM. Built with automatic speed change technology, it adjusts torque and speed during cuts. Weighing 7 pounds with dimensions of 14 by 7.8 by 10.4 inches, it suits you if you need a lightweight cutting tool for portable ripping.
Pros
- Electronically controlled brushless motor delivering 5,000 RPM
- Automatic Speed Change matches torque and speed to the cut
- Lightweight construction at 7 pounds
- Cordless 18V battery operation
Cons
- Sold as a bare tool without an included battery or charger
- 6-1/2-inch blade diameter provides less cutting depth than 7-1/4-inch options
Good fit if
- You want an 18V cordless saw with a 5,000 RPM brushless motor.
- You prefer a lighter 7-pound tool for portable cutting tasks.
Skip if
- You require an out-of-the-box kit with a battery and charger included.
- You need a larger 7-1/4-inch blade for deeper cutting capacity.
Verdict: Makita 6-1/2-Inch Brushless Circular Saw provides 5,000 RPM speed and automatic torque adjustment in a 7-pound frame. It delivers reliable cutting performance if you already own compatible 18V batteries.
Milwaukee 18V Barrel Grip Jig Saw
Best for: controlled cutting with an 18V barrel grip
- Voltage
- 18V (what this guide is about)
- Dimensions
- 11.7 × 3.2 × 7.3 inches
- Weight
- 5.75 pounds
This Milwaukee cordless jig saw runs on an 18V DC platform and features a barrel-grip body style. It weighs 5.75 pounds and measures 11.7 inches long, 7.3 inches high, and 3.2 inches wide. If you need a dedicated 18V cutting tool with a low-profile body for precise control rather than a standard top-handle configuration, this compact saw fits your workspace requirements.
Pros
- Operates on an 18V DC cordless platform
- Weighs 5.75 pounds for manageable handling
- Compact profile measuring 11.7 by 3.2 by 7.3 inches
- Barrel-grip format positions your hand closer to the cutline
Cons
- Battery and charger are not included in the listing
- Stroke rate and cutting depth limits are not specified
Good fit if
- You want an 18V barrel-grip saw rather than a top-handle tool
- You need a handheld saw weighing under 6 pounds
Skip if
- You need a stationary table saw with a dedicated rip fence
- You require published stroke speed specifications before purchasing
Verdict: Milwaukee 18V Barrel Grip Jig Saw delivers 18V DC operation in a 5.75-pound chassis designed for close-to-workpiece guiding. It serves you well if your setup favors a low-profile grip over a standard top handle.
RYOBI 18V Cordless 7-1/4-Inch Compound Miter Saw
Best for: portable 18V cordless cutting
- Voltage
- 18V (what this guide is about)
- Blade Diameter
- 7-1/4 in.
- Power Source
- Cordless
- Dimensions
- 21 × 13.5 × 12.4 inches
- Weight
- 19 pounds
View on Amazon: RYOBI 18V Cordless 7-1/4-Inch Compound Miter Saw
This RYOBI cordless compound miter saw runs on an 18V power source and uses a 7-1/4-inch blade. At 19 pounds and measuring 21 by 13.5 by 12.4 inches, it provides a portable cutting setup that you can move between work areas with minimal effort. It suits you if you need compact, battery-powered cutting on an 18V platform without an electrical outlet.
Pros
- Operates on an 18V cordless battery platform
- Uses standard 7-1/4-inch diameter blades
- Weighs 19 pounds for easier jobsite portability
- Compact dimensions at 21 by 13.5 by 12.4 inches
Cons
- Sold as a bare tool with no battery included
- Limited to a 7-1/4-inch maximum blade diameter
Good fit if
- You already own compatible 18V cordless batteries.
- You need a portable saw weighing under 20 pounds.
- You make cuts suited for a 7-1/4-inch blade.
Skip if
- You need an included battery and charger.
- You require a larger blade diameter than 7-1/4 inches.
Verdict: RYOBI 18V Cordless 7-1/4-Inch Compound Miter Saw delivers portable cutting at 19 pounds on an 18V cordless setup. It serves you well if you already have matching batteries and need a compact 7-1/4-inch saw.
Makita 18V LXT Brushless Cordless Jig Saw
Best for: controlled orbital cutting on 18V power
- Voltage
- 18V (what this guide is about)
- Power Source
- Cordless
- Dimensions
- 17.7 × 5.31 × 14.4 inches
This 18V cordless jig saw features a brushless motor operating between 0 and 3,000 strokes per minute. It offers three orbital settings alongside straight cutting, plus a soft no-load mode that manages blade speed during cut starts. Built-in LED lighting and a two-finger variable-speed trigger with a lock-on switch support visibility and control. It suits you if you already run compatible gear and need controlled curved cuts.
Pros
- Brushless motor delivering 0 to 3,000 strokes per minute
- Three orbital settings plus straight cutting
- Soft no-load mode for controlled cut starts
- Built-in LED work light
Cons
- Sold as bare tool without battery or charger
- No saw blades included in the package
Good fit if
- You need a variable-speed cordless cutting tool running up to 3,000 strokes per minute.
- You want multiple orbital settings paired with straight cutting.
- You already own compatible 18V batteries.
Skip if
- You need a complete kit that includes a battery and charger.
- You require a stationary table saw for wide ripping operations.
Verdict: Makita 18V LXT Brushless Cordless Jig Saw delivers up to 3,000 strokes per minute with multiple orbital modes for adaptable cutting. It provides a compact 18V solution if you already possess matching platform power sources.
RYOBI 18V Brushless Cordless Jig Saw
Best for: portable curved cuts on an 18V battery
- Voltage
- 18V (what this guide is about)
- Power Source
- Cordless
- Dimensions
- 9.21 × 8.11 × 3.27 inches
- Weight
- 4.32 pounds
This RYOBI tool is an 18-volt cordless jig saw built with a brushless motor. It weighs 4.32 pounds and features four orbital settings alongside a tool-free bevel adjustment that locks at 45 degrees left and right. You also get an on-board LED worklight and an easy-release blade lever. It suits you if you need a compact, portable cutting tool for curved and beveled cuts using an 18V battery platform.
Pros
- Brushless motor for efficient 18V operation
- Four orbital settings for varied cutting tasks
- Tool-free bevel adjustment with detents at 45 degrees left and right
- On-board LED worklight illuminates cut lines
Cons
- Bare-tool purchase excludes battery and charger
- Lacks a stationary table and fence for standard rip cuts
Good fit if
- You already own compatible 18V batteries and chargers.
- You need orbital and 45-degree bevel adjustments in a portable saw.
- You want a lightweight cutting tool weighing 4.32 pounds.
Skip if
- You need a dedicated stationary table saw for large sheet ripping.
- You do not own an 18V battery and require an included power source.
Verdict: RYOBI 18V Brushless Cordless Jig Saw delivers versatile curved cutting with four orbital stages and a 4.32-pound body. It provides cordless flexibility for cuts requiring bevels up to 45 degrees.
Milwaukee 18V 6-1/2-Inch Circular Saw
Best for: 18V cutting with battery included
- Voltage
- 18V (what this guide is about)
- Blade Diameter
- 6-1/2-Inch
- Dimensions
- 15 × 11 × 13 inches
This Milwaukee cordless circular saw runs on an 18V platform and uses a 6-1/2-inch blade. The package includes an M18 XC High Capacity REDLITHIUM battery, so you have power ready. Measuring 15 inches long, 11 inches wide, and 13 inches high, it suits you if you want a dedicated 18V cutting tool.
Pros
- Operates on an 18V battery platform
- Uses a 6-1/2-inch blade diameter
- Includes an M18 XC High Capacity REDLITHIUM battery
Cons
- Smaller blade size than 7-1/4-inch saws
- No charger listed in the package specifications
Good fit if
- You want an 18V circular saw that comes with a battery.
- You use standard 6-1/2-inch circular saw blades.
Skip if
- You require a larger 7-1/4-inch blade capacity.
- You need a kit that includes a battery charger.
Verdict: Milwaukee 18V 6-1/2-Inch Circular Saw provides cordless operation with an included 18V battery and compact blade format. It offers a practical cutting setup for standard 6-1/2-inch blade requirements.
Makita 18V LXT Cordless Jig Saw
Best for: versatile cordless curved and straight cutting
- Voltage
- 18V (what this guide is about)
- Power Source
- Cordless
- Dimensions
- 12.3 × 3.6 × 9.1 inches
- Weight
- 6 pounds
This Makita cordless jig saw runs on an 18V battery platform and delivers variable speeds between 0 and 2,600 strokes per minute. It features three orbital settings alongside straight cutting for managing different cuts. At six pounds, it includes a tool-less blade change lever and a heavy-gauge machined base. It suits you if you need a dedicated cordless cutting tool for curved and straight work without dragging a power cord.
Pros
- Variable speed motor delivers 0 to 2,600 strokes per minute
- Three orbital settings plus straight cutting
- Tool-less blade change lever for quick swaps
- Heavy gauge precision machined base
Cons
- Sold as bare tool without battery or charger included
- Weighs 6 pounds before adding a battery pack
Good fit if
- You already own compatible Makita 18V LXT batteries.
- You need multiple orbital settings for curved and straight cuts.
- You want tool-free blade changes via a dedicated lever.
Skip if
- You require an included battery and charger in the package.
- You want a bare cutting tool that weighs under 6 pounds.
Verdict: Makita 18V LXT Cordless Jig Saw provides reliable 18V cordless cutting with flexible orbital settings and a tool-less blade clamp. Its solid six-pound build gives you stable control across variable cutting speeds.
Makita 6-1/2-Inch Cordless Plunge Circular Saw
Best for: plunge cutting on dual 18V battery power
- Voltage
- 18V (what this guide is about)
- Blade Diameter
- 6-1/2 inch
- Power Source
- Cordless
- Dimensions
- 16 × 12.1 × 19.6 inches
- Weight
- 27.6 pounds
View on Amazon: Makita 6-1/2-Inch Cordless Plunge Circular Saw
This Makita cordless plunge circular saw operates on two 18V batteries to deliver 36V power to its brushless motor. It runs a 6-1/2-inch blade with variable speed settings ranging from 2,500 to 6,300 RPM. Built-in automatic speed change adjusts torque and cutting speed under load. You will find it suits your work if you need close-to-wall cutting down to 11/16 inch on an 18V platform.
Pros
- Variable speed dial provides 2,500 to 6,300 RPM
- Runs on two 18V LXT batteries for 36V performance
- Cuts as close as 11/16 inch from walls
- Automatic speed change adjusts cutting speed and torque
Cons
- Requires two charged 18V batteries simultaneously
- Package weight listed at 27.6 pounds
Good fit if
- You already use the Makita 18V LXT battery platform.
- You need variable speed control between 2,500 and 6,300 RPM.
- You make cuts close to vertical surfaces within 11/16 inch.
Skip if
- You want a saw that runs on a single 18V battery.
- You need a larger blade diameter than 6-1/2 inches.
Verdict: Makita 6-1/2-Inch Cordless Plunge Circular Saw delivers 36V cutting power using two 18V batteries, making it a capable plunge-cut option. Its adjustable 2,500 to 6,300 RPM range and 11/16-inch wall clearance handle varied materials and tight spaces.
RYOBI ONE+ HP 18V 7-1/4-Inch Brushless Circular Saw
Best for: Deep bevel cutting on 18V battery power
- Voltage
- 18V (what this guide is about)
- Blade Diameter
- 7-1/4 in.
- No-Load Speed
- 5,000 RPM
- Power Source
- Cordless
- Dimensions
- 13.9 × 9.06 × 7.95 inches
- Weight
- 9.63 pounds
View on Amazon: RYOBI ONE+ HP 18V 7-1/4-Inch Brushless Circular Saw
This cordless circular saw runs on an 18V brushless motor spinning a 7-1/4-inch blade at 5,000 RPM. You get a cutting depth of 2-9/16 inches at 0 degrees and 1-13/16 inches at 45 degrees, alongside bevel stops up to 56 degrees. Built-in features include an LED worklight, rafter hook, and vacuum port adapter. It suits you if you need full-depth framing cuts on an 18V platform.
Pros
- 2-9/16-inch maximum cutting depth at 0 degrees
- 18V brushless motor delivers 5,000 RPM
- Six bevel detents up to 56 degrees
- Includes dust port adapter and built-in LED light
Cons
- Sold as a bare tool without battery or charger
- Bare tool weight is 9.63 pounds
Good fit if
- You need a 7-1/4-inch blade capacity on an 18V battery platform.
- You frequently make bevel cuts with preset detents up to 56 degrees.
- You want built-in dust extraction compatibility with 1-1/4-inch to 1-7/8-inch hoses.
Skip if
- You require a complete kit that includes a battery and charger.
- You prefer a lighter saw than 9.63 pounds for overhead cutting.
Verdict: RYOBI ONE+ HP 18V 7-1/4-Inch Brushless Circular Saw offers full 2-9/16-inch cut capacity and a 5,000 RPM motor for 18V battery users. Preset bevel detents and integrated dust collection make it a capable choice for framing dimensions.
Makita 18V Cordless Barrel Grip Jig Saw
Best for: controlled curved and straight cuts in MDF
- Voltage
- 18V (what this guide is about)
- Power Source
- Cordless
- Length
- 10.3 inches
This Makita tool is an 18V cordless barrel grip jig saw measuring 10.3 inches long. It features a brushless motor with a 5-speed control dial that delivers between 800 and 3,000 strokes per minute. You get three orbital settings alongside a straight cutting mode for material adjustments. It suits you if you need a compact, variable-speed 18V cutting tool for handling up to 1-inch MDF materials without a cord.
Pros
- Brushless motor operating between 800 and 3,000 strokes per minute
- Variable 5-speed control dial
- Three orbital settings plus straight cutting mode
- Compact 10.3-inch length barrel grip design
Cons
- Battery not included with tool
- No charger included in the package
Good fit if
- You need a compact 18V cutting tool with a 10.3-inch body.
- You want a 5-speed dial delivering between 800 and 3,000 SPM.
- You require three orbital settings and straight cutting options.
Skip if
- You need a tool that includes a battery and charger.
- You prefer a corded power connection.
Verdict: Makita 18V Cordless Barrel Grip Jig Saw provides a brushless 800 to 3,000 SPM motor and 5-speed dial in a 10.3-inch body. It offers three orbital stages plus straight cutting for varied cutting jobs.
Metabo HPT 18V Cordless Orbital Jig Saw
Best for: lightweight orbital cutting on 18V batteries
- Voltage
- 18V (what this guide is about)
- Power Source
- Cordless
- Dimensions
- 14.2 × 1.03 × 3.9 inches
- Weight
- 4.2 pounds
This Metabo HPT tool is an 18V cordless jig saw built for controlled cutting. You get a variable-speed motor reaching up to 2,500 strokes per minute, three orbital settings, and one straight cut mode. Weighing 4.2 pounds, the saw features an adjustable base for bevel cuts, an LED work light, and a dust blower. It suits you if you need a lightweight cutter compatible with MultiVolt batteries.
Pros
- Weighs 4.2 pounds for reduced operator fatigue
- Four cutting modes including three orbital settings
- Tool-less blade change and integrated LED work light
- Built-in dust blower clears the line of cut
Cons
- Maximum speed limited to 2,500 strokes per minute
- Brushless motor not specified
Good fit if
- You want a lightweight 4.2-pound saw for detailed woodwork.
- You already use Metabo HPT 18V or MultiVolt batteries.
- You need multiple orbital settings with an integrated dust blower.
Skip if
- You require cutting speeds above 2,500 strokes per minute.
- You specifically require a brushless motor.
Verdict: Metabo HPT 18V Cordless Orbital Jig Saw offers four cutting modes and a 4.2-pound body for easy handling. It provides dependable orbital capability if you already run Metabo HPT 18V batteries.
Makita 18V Sub-Compact 6-1/2-Inch Circular Saw
Best for: compact 18V cordless cutting tasks
- Voltage
- 18V (what this guide is about)
- Blade Diameter
- 6-1/2”
- No-Load Speed
- 5, 000 RPM
- Cutting Depth 90
- 2-1/4”
- Power Source
- Cordless
- Dimensions
- 9 × 13.5 × 9 inches
View on Amazon: Makita 18V Sub-Compact 6-1/2-Inch Circular Saw
This cordless saw runs on Makita 18V power with a brushless motor delivering 5,000 RPM. You get a 6-1/2-inch blade diameter, a 2-1/4-inch cutting depth at 90 degrees, and a bevel range from 0 to 50 degrees. At 10-5/8 inches long and 4 pounds bare, it offers compact handling. It suits you if you need portable cutting capacity without bulk.
Pros
- Brushless motor delivers up to 5,000 RPM
- Cutting depth reaches 2-1/4 inches at 90 degrees
- Compact length of 10-5/8 inches and 4-pound bare tool weight
- Bevel capacity ranges from 0 to 50 degrees
- Includes dust extracting attachment and 24T carbide-tipped blade
Cons
- Battery and charger are not included
- Smaller 6-1/2-inch blade diameter compared to standard 7-1/4-inch circular saws
Good fit if
- You already own compatible Makita 18V batteries and chargers.
- You need a compact circular saw measuring under 11 inches in length.
- You require up to 2-1/4 inches of cutting depth at 90 degrees.
Skip if
- You need an all-in-one kit that includes a battery and charger.
- You require a larger 7-1/4-inch blade diameter for your cuts.
Verdict: Makita 18V Sub-Compact 6-1/2-Inch Circular Saw delivers 5,000 RPM and a 2-1/4-inch cut depth in a lightweight 10-5/8-inch frame. It provides dependable portable performance if you already use 18V cordless tools.
Bosch 18V Brushless Barrel-Grip Jig Saw
Best for: controlled curved cuts at high stroke speeds
- Voltage
- 18V (what this guide is about)
- Dimensions
- 6.1 × 3.2 × 7.1 inches
- Weight
- 4.35 pounds
This Bosch 18V cordless jig saw features a compact barrel-grip design and a brushless motor delivering up to 3,800 strokes per minute. Weighing 4.35 pounds, it includes four pendulum stages, an adjustable blade guide to control deflection, and an LED light. You can connect it to the Bosch Toolbox App for speed preselection. It suits you if you need a high-speed, controllable 18V cutting tool for straight or curved work.
Pros
- Delivers up to 3,800 no-load strokes per minute
- Tool-free blade insertion and ejection system
- Four pendulum stages to match cut speed and cut quality
- Adjustable blade guide channel to reduce blade deflection
- Integrated LED light and Bosch Toolbox App connectivity
Cons
- Requires an app connection to pre-select tool speeds
- No battery or charger listed in the package specifications
- Barrel-grip format lacks an overhead top handle
Good fit if
- You want a high-speed 18V jig saw that reaches 3,800 SPM.
- You prefer a low-profile barrel grip for close guide control.
- You want app-based speed pre-selection and drop control alerts.
Skip if
- You prefer a traditional D-handle or top-handle saw body.
- You do not want to configure tool speeds through a mobile app.
- You need an all-in-one kit that includes a battery and charger.
Verdict: Bosch 18V Brushless Barrel-Grip Jig Saw provides fast 3,800 SPM cutting and deflection control in a compact 4.35-pound frame. Its four pendulum stages and app connectivity deliver precise control on 18V battery power.
Makita 18V Brushless Cordless Jig Saw
Best for: controlled curved cuts using existing 18V batteries
- Voltage
- 18V (what this guide is about)
- Power Source
- Cordless
- Dimensions
- 17.7 × 5.31 × 14.4 inches
This renewed Makita cordless jig saw runs on an 18V battery platform. Its brushless motor provides variable speeds from 0 to 3,000 strokes per minute, matched with three orbital settings and a straight-cutting mode. A built-in soft no-load feature reduces initial blade speed until contact, while an integrated LED light brightens cutlines. It suits you if you already own compatible 18V batteries and need controlled curved cuts.
Pros
- Brushless motor delivers 0 to 3,000 strokes per minute
- Three orbital settings plus straight cutting option
- Soft no-load mode manages startup blade speed
- Built-in LED work light illuminates the cutting area
- Two-finger variable speed trigger includes a lock-on button
Cons
- Sold as bare tool without an included battery or charger
- Renewed condition rather than brand new
Good fit if
- You already own compatible 18V power sources and chargers
- You need variable speeds up to 3,000 strokes per minute with orbital action
- You want an LED light and soft no-load startup for cutting control
Skip if
- You need a complete kit that includes a battery and charger
- You prefer a factory-new tool instead of a renewed model
Verdict: Makita 18V Brushless Cordless Jig Saw delivers up to 3,000 strokes per minute with multiple orbital settings and soft no-load operation. It offers dependable cutting control for users who already possess compatible 18V power sources.
Specifications side by side
| Spec | Makita 18V X2 Brushless 7-1/4-Inch Rear Handle Saw | Makita 18V Brushless 6-1/2-Inch Cordless Circular Saw | Milwaukee 18V Barrel Grip Jig Saw | RYOBI 18V Cordless 7-1/4-Inch Compound Miter Saw | Makita 18V LXT Brushless Cordless Jig Saw | RYOBI 18V Brushless Cordless Jig Saw | Milwaukee 18V 6-1/2-Inch Circular Saw | Makita 18V LXT Cordless Jig Saw | Makita 6-1/2-Inch Cordless Plunge Circular Saw | RYOBI ONE+ HP 18V 7-1/4-Inch Brushless Circular Saw | Makita 18V Cordless Barrel Grip Jig Saw | Metabo HPT 18V Cordless Orbital Jig Saw | Makita 18V Sub-Compact 6-1/2-Inch Circular Saw | Bosch 18V Brushless Barrel-Grip Jig Saw | Makita 18V Brushless Cordless Jig Saw |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Diameter | 7-1/4" | 6-1/2" | not specified | 7-1/4 in. | not specified | not specified | 6-1/2-Inch | not specified | 6-1/2 inch | 7-1/4 in. | not specified | not specified | 6-1/2” | not specified | not specified |
| No-Load Speed | 5,100 RPM | 5,000 RPM | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 5,000 RPM | not specified | not specified | 5, 000 RPM | not specified | not specified |
| Cutting Depth 90 | 2-9/16” | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 2-1/4” | not specified | not specified |
| Voltage | 36V (18V X2) | 18V | 18VDC | 18V | 18V | 18.0 volts | 18-Volt | 18V | 36V | 18V | 18V | 18V | 18V | 18V | 18V |
| Power Source | not specified | Cordless | not specified | Cordless | Cordless | Cordless | not specified | Cordless | Cordless | Cordless | Cordless | Cordless | Cordless | not specified | Cordless |
| Dimensions | 18.8 × 8.9 × 12 inches | 14 × 7.8 × 10.4 inches | 11.7 × 3.2 × 7.3 inches | 21 × 13.5 × 12.4 inches | 17.7 × 5.31 × 14.4 inches | 9.21 × 8.11 × 3.27 inches | 15 × 11 × 13 inches | 12.3 × 3.6 × 9.1 inches | 16 × 12.1 × 19.6 inches | 13.9 × 9.06 × 7.95 inches | not specified | 14.2 × 1.03 × 3.9 inches | 9 × 13.5 × 9 inches | 6.1 × 3.2 × 7.1 inches | 17.7 × 5.31 × 14.4 inches |
| Weight | 12.1 pounds | 7 pounds | 5.75 pounds | 19 pounds | not specified | 4.32 pounds | not specified | 6 pounds | 27.6 pounds | 9.63 pounds | not specified | 4.2 pounds | 4 pounds | 4.35 pounds | not specified |
| Length | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 10.3 inches | not specified | not specified | not specified | not specified |
| Size | No Size | 0.625 in | not specified | P553 | 18V | not specified | not specified | One Size | 6.5 in | not specified | not specified | not specified | 1 Count (Pack of 1) | not specified | not specified |
| Color | Teal | Teal | Multicolor | Grey/Green | Blue | Multicolor | Red | Greenish Blue | Multicolor | Green/Black | Teal | Black, Green | Multicolor | Bosch Blue | Blue |
| Model | XSR01Z | XSH03Z | 2737B-20 | P553 | XVJ04Z | PBLJS01 | 2630-20 | XVJ03Z | XPS01PTJ | PBLCS302B | XVJ05Z | CJ18DAQ4 | XSH04ZB | GST18V-60BCN | not specified |
When an 18V Battery Platform Is Worth It
An 18V battery platform gives you cordless mobility across different saw categories without power cords. Published specifications show 18V batteries operate tools ranging from 4.2-pound orbital jig saws to a 19-pound compound miter saw. Motors achieve 5,000 RPM on circular saws and up to 3,800 strokes per minute on jig saws. Select tools combine two 18V packs for 36V operations, such as plunge cutting. This setup lets you run multiple jobsite cutters from shared brand batteries.
Worth it if
- You already own compatible 18V batteries from brands such as Makita, Milwaukee, or RYOBI.
- You require portable cutting tools ranging from lightweight jig saws to a 19-pound miter saw.
- You plan to run dual-battery tools that produce 36V cutting power using paired 18V packs.
Skip it if
- You do all cutting in a fixed location with constant access to wall outlets.
- You do not want to manage battery swapping across multiple tools on a single platform.
How We Picked 18V Saws
We identify eligible tools by finding 18V voltage listed in the product title or feature list. Only models with confirmed 18V battery platforms are included, and we show only one variant per tool family. We never physically test products. Instead, you get direct comparisons based strictly on published manufacturer specifications.
Our guide displays products in stock first, then by Amazon sales rank (better-selling products first). We detail key specifications like blade diameter, weight, and exterior dimensions so you can find the right match among the 15 picks for 2026.
How to Choose the Right 18V Saw
-
Select the Right Grip Style
You should check the body design before selecting a cordless cutting tool. A barrel-grip body places your hand closer to the workpiece surface, which gives you greater steering precision during tight curves and detailed contour cuts. Top-handle models offer traditional upright ergonomics that suit downward pressure during straight paths. If you need close tracking along scribed layout lines, select a low-profile barrel design like the Milwaukee 18V Barrel Grip Jig Saw. Match your handle style directly to your balance requirements.
-
Evaluate Orbital Action Settings
Examine the number of orbital stages listed on the product specifications. Straight reciprocating motion cuts slowly but leaves smooth edges without tear-out. Adding orbital motion swings the blade forward on upstrokes, which accelerates rough cutting through thick timber at the expense of edge cleanliness. Choosing a tool with selectable orbital modes allows you to switch between fast roughing and splinter-free finish cuts. The RYOBI 18V Brushless Cordless Jig Saw provides four orbital stages, making it suitable if your work demands rapid dimensioning as well as clean decorative cuts.
-
Check Variable Speed Ranges
Look at the stated motor speed range before selecting a saw. Fixed-speed motors run at maximum RPM continuously, which works for dimensional softwood but can burn dense hardwoods or melt plastics. A wide, dial-controlled operating window gives you the flexibility to adapt motor speed to specific stock densities and delicate plunge operations. For example, the Makita 6-1/2-Inch Cordless Plunge Circular Saw features an adjustable range between 2,500 and 6,300 RPM. Choose broad speed adjustability if you regularly cut laminate, composite sheets, or dense hardwoods that require controlled feed rates.
-
Compare Stroke Rate Ratings
Examine the maximum strokes per minute specification when comparing reciprocating cutting options. A higher stroke rate delivers quicker material removal and smoother finishes along curved lines because the blade teeth engage the material more frequently per linear inch of feed. Lower top speeds can drag or chatter in hard stock. The Bosch 18V Brushless Barrel-Grip Jig Saw reaches 3,800 SPM, which suits fast production work in sheet goods. If your tasks involve high volumes of curved cuts in plywood or solid boards, select a tool with higher maximum SPM.
-
Consider Bare Tool Weight
Check the total bare weight specification before making your purchase. A heavier saw provides solid benchtop stability and dampens cutting vibration, but it increases user fatigue during extended handheld trimming or overhead vertical tasks. Compact models weighing under five pounds allow prolonged single-handed steering without strain. The Metabo HPT 18V Cordless Orbital Jig Saw lists at 4.2 pounds, making it suitable for long working sessions and detailed vertical trimming. If you value continuous handheld maneuverability over stationary stability, prioritize tools that stay near the four-pound specification mark.
Frequently asked questions
Can an 18V cordless saw cut through dimensional framing lumber?
Yes, 18V circular saws handle thick dimensional lumber when paired with the proper blade diameter. The RYOBI ONE+ HP circular saw features a 7-1/4-inch blade that achieves a 2-9/16-inch cutting depth. The Makita XSR01Z rear handle model also uses two 18V batteries to spin a 7-1/4-inch blade, giving you full 2-9/16-inch single-pass capacity.
What stroke speed range can you expect from an 18V jig saw?
You can expect cutting speeds ranging from 800 up to 3,800 strokes per minute depending on the specific model. The Makita XVJ05Z offers an adjustable 5-speed dial spanning 800 to 3,000 SPM across three orbital stages. For higher stroke rates, the Bosch GST18V-60BCN delivers up to 3,800 SPM alongside four pendulum settings in a 4.35-pound chassis.
How do dual 18V cordless saws operate compared to single-battery units?
Dual-battery models draw from two separate 18V battery packs simultaneously to deliver 36V operational power. The Makita XPS01PTJ plunge saw uses this twin-battery setup to run a motor spinning between 2,500 and 6,300 RPM. This configuration provides higher operational power for heavy cutting while letting you use standard 18V batteries from the same platform.
Which 18V saw is configured for stationary miter cuts?
The RYOBI P553 compound miter saw is built specifically for angled crosscutting using cordless power. It features a 7-1/4-inch blade diameter mounted on a 19-pound standalone frame measuring 21 inches long, 13.5 inches wide, and 12.4 inches high. This design provides a self-contained cutting bench that operates entirely on an 18V battery without power cords.
What is the lightest 18V jig saw listed?
The Metabo HPT CJ18DAQ4 is the lightest option listed, weighing 4.2 pounds. It provides four cutting modes within a compact frame measuring 14.2 inches long and 3.9 inches high. If you want another lightweight unit, the RYOBI PBLJS01 weighs 4.32 pounds, features four orbital stages, and supports bevel cuts up to 45 degrees.
Can you make flush plunge cuts next to walls using an 18V saw?
Yes, specialized cordless plunge saws let you cut directly against upright surfaces. The Makita XPS01PTJ plunge circular saw is engineered with an 11/16-inch wall clearance specification for cutting along room edges and flat panels. It pairs this tight clearance with a 6-1/2-inch blade diameter and variable speed controls running up to 6,300 RPM.
Do any 18V cordless circular saws come with an included battery?
Yes, select models include a power source directly in the box. The Milwaukee 2630-20 6-1/2-inch circular saw includes an 18V battery in its package specifications. This supplies a complete cordless cutting package for standard 6-1/2-inch blades, whereas bare-tool options require you to supply an existing compatible battery pack from the tool line.