Best Table Saws Under $300 in 2026: 15 Picks Ranked by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best table saws under $300 requires looking at raw specifications rather than marketing claims. We compared 15 tools ranked by their published data. The SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand leads because its rack-and-pinion fence ensures accurate cuts for general jobsite ripping. Each pick reflects specific attributes like blade diameter and amperage from the listing. This guide helps you decide which saw matches your cutting capacity and portability needs.
Quick picks
The best fit for you
- You need a full-capacity jobsite saw with a stand SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand It features a 10-inch blade and 15-amp motor for ripping 4x4 lumber on site.
- You want the most compact model on the list Bosch CCS180 18V 6-1/2 in Cordless Circular Saw The Bosch CCS180 weighs just 6.6 pounds, making it the lightest tool in this group.
- You require dual-bevel cutting for detailed trim work SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw The SKIL MS6305-00 offers dual-bevel capability with a 15-amp motor for wide crosscuts.
- You need deep cordless cutting for framing tasks DEWALT 60V MAX 7-1/4-Inch Circular Saw The DEWALT DCS577B provides a 2-7/16-inch cutting depth using 60V MAX batteries.
Our 15 picks
SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand
Best for: general jobsite ripping and 4x4 cuts
- Blade Diameter
- 10-Inch
- Amperage
- 15 Amp
- Intended Use
- Jobsite
- Dimensions
- 1 × 1 × 1 inches
- Weight
- 51.2 pounds
View on Amazon: SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand Affiliate link
The SKIL 10-inch jobsite table saw gives you a 15-amp motor paired with an integrated folding stand for transport. It features rack and pinion fence rails to maintain parallel alignment, plus micro-adjustments for true blade tracking. You get a cutting depth capable of slicing 4x4 material in a single 90-degree pass and a 2 to 47-degree bevel range. It suits woodworkers needing full 10-inch capacity in a mobile setup.
Pros
- Rack and pinion fence rails keep the fence parallel to the blade
- 15-amp motor cuts through 4x4 material at 90 degrees
- Integrated folding stand legs fold in for compact storage
- Micro-adjustment aligns blade parallel to fence and miter slot
Cons
- Weight of 51.2 pounds requires lifting effort to move
- Zero-clearance insert plate is a separate style option
Good fit if
- You need to cut 4x4 dimensional lumber in a single pass at 90 degrees.
- You want rack and pinion fence rails to maintain parallel cuts.
- You require an integrated folding stand for jobsite portability.
Skip if
- You need an ultralight benchtop saw weighing under 50 pounds.
- You require bevel cuts past 47 degrees.
Verdict: SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand delivers dependable power and accurate cuts with its rack-and-pinion fence and 4x4 cutting depth. It serves as an effective mobile workhorse when you need full 10-inch capacity and a folding setup.
SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw
Best for: wide crosscuts and dual-bevel trim work
- Blade Diameter
- 10"
- Amperage
- 15 AMP
- No-Load Speed
- 4,800 RPM
- Dimensions
- 35.4 × 22.4 × 14.2 inches
- Weight
- 39.4 pounds
View on Amazon: SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw Affiliate link
This SKIL sliding compound miter saw features a 15-amp motor running at 4,800 RPM with a 10-inch blade. You get dual-bevel capability with stops at 48 and 45 degrees left, zero degrees, and 45 degrees right, along with crosscut capacity up to 2x12 lumber at 90 degrees. An integrated LED shadow line assists alignment. It suits you if you need wide crosscuts and angled cuts.
Pros
- 15-amp motor delivers 4,800 RPM
- Crosscuts lumber up to 2x12 at 90 degrees and 2x8 at 45 degrees
- Dual-bevel stops at 48° and 45° left, 0°, and 45° right
- Miter cuts up to 50 degrees left and right with 11 positive stops
Cons
- Weighs 39.4 pounds without an included stand
- Requires significant bench space with a 35.4-inch length and 22.4-inch width
Good fit if
- You need to crosscut dimensional lumber up to 2x12 at 90 degrees.
- You make bevel cuts in both left and right directions without flipping stock.
- You prefer an LED shadow line for cut alignment.
Skip if
- You need a dedicated table saw for ripping wide sheet goods.
- You require a lightweight tool under 30 pounds for frequent transport.
Verdict: SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw delivers wide 2x12 crosscut capacity and dual-bevel flexibility powered by a 15-amp motor. It is a capable cutting solution for dimensional lumber and trim work.
DEWALT 7-1/4-Inch Cordless Miter Saw
Best for: cordless trim work and portable jobsite cutting
- Blade Diameter
- 7-1/4"
- Voltage
- 20V MAX
- Power Source
- Cordless
- Dimensions
- 25.4 × 21 × 16.1 inches
- Weight
- 30 pounds
View on Amazon: DEWALT 7-1/4-Inch Cordless Miter Saw Affiliate link
This DEWALT 7-1/4-Inch Cordless Miter Saw runs on a 20V MAX battery platform and weighs 30 pounds. It features an integrated cut line positioning system and cuts nested crown up to 3-5/8 inches or base vertically up to 3-1/2 inches. The miter detent plate includes 11 positive stops with a cam lock handle. You get a compact cross-cut option if you already use compatible DEWALT cordless batteries on your jobsite.
Pros
- Weighs 30 pounds for portable transport
- Stainless steel miter detent plate includes 11 positive stops
- Integrated cut line cross-cut positioning system
- Cuts up to 3-1/2-inch vertical base molding
Cons
- Sold as tool only without battery or charger
- Blade size is limited to 7-1/4 inches
Good fit if
- You need a portable 30-pound saw for trim cuts.
- You already own DEWALT 20V MAX batteries and chargers.
Skip if
- You need a dedicated table saw for ripping wide boards.
- You do not own compatible 20V MAX power tool batteries.
Verdict: DEWALT 7-1/4-Inch Cordless Miter Saw delivers portable cross-cutting with clear cut line alignment and 11 miter stops. It provides solid capability for trim tasks if you already have the required battery setup.
DEWALT 20V MAX 5-Inch Cordless Band Saw
Best for: portable deep cutting on 20V MAX batteries
- Voltage
- 20V MAX
- Dimensions
- 22.3 × 14.4 × 8.7 inches
- Weight
- 12.4 pounds
View on Amazon: DEWALT 20V MAX 5-Inch Cordless Band Saw Affiliate link
This DEWALT cordless band saw delivers a 5-inch cutting capacity powered by a 20V MAX brushless motor. At 12.4 pounds and measuring 22.3 inches long, you get a portable design featuring variable speed control, an integrated hang hook, and a tool-less blade change lever. An onboard LED work light with a 20-second delay illuminates cut lines. It suits you if you need deep, controlled cuts without relying on a wall outlet.
Pros
- 5-inch cutting capacity for deep cuts
- Brushless motor running on 20V MAX power
- Tool-less blade changing lever
- LED work light with 20-second shutoff delay
- Integrated hang hook prevents base and handle damage
Cons
- Sold as bare tool without battery or charger
- Weighs 12.4 pounds before adding a battery
Good fit if
- You need a handheld saw with a 5-inch cutting capacity.
- You already use DEWALT 20V MAX batteries.
- You require variable speed and an integrated LED work light.
Skip if
- You need a stationary table saw with a rip fence.
- You want a complete kit containing a battery and charger.
Verdict: DEWALT 20V MAX 5-Inch Cordless Band Saw provides 5 inches of cutting capacity and brushless variable-speed control in a portable frame. It is a dependable pick if you need handheld cutting performance on the DEWALT battery platform.
SKIL TS6338 8-1/4-Inch Jobsite Saw
Best for: portable sheet material ripping
- Blade Diameter
- 8-1/4-Inch
- Rip Capacity
- 24.5-inch
- Amperage
- 15 Amp
- Cutting Depth 90
- 2-1/2-inch
- Intended Use
- Jobsite
- Dimensions
- 26 × 22.8 × 17.2 inches
View on Amazon: SKIL TS6338 8-1/4-Inch Jobsite Saw Affiliate link
This SKIL jobsite table saw features an 8-1/4-inch blade and a 15-amp motor. It offers a 24.5-inch right rip capacity and a 2-1/2-inch maximum depth of cut. The aluminum table and rack-and-pinion fence rails help maintain parallel alignment for accurate cuts. Its compact folding stand design aids portability on the jobsite.
Pros
- 15-amp motor provides power for ripping and cross-cutting
- 24.5-inch right rip capacity handles sheet materials
- Rack and pinion fence rails ensure parallel alignment
- Aluminum table supports accurate cutting performance
Cons
- 8-1/4-inch blade limits cutting capacity compared to 10-inch models
- Maximum depth of cut is 2-1/2 inches at 0 degrees
- No bevel adjustment mentioned in specifications
Good fit if
- You need a portable saw for jobsite use
- You prioritize a wide rip capacity for sheet goods
- You want a compact folding stand for storage
Skip if
- You require a 10-inch blade for deeper cuts
- You need dual bevel capabilities for complex angles
- You prefer a larger table surface for stability
Verdict: SKIL TS6338 8-1/4-Inch Jobsite Saw suits contractors who need portability and wide rip capacity for sheet materials. It fits users who value parallel fence accuracy over deep cutting depth.
VEVOR 10-Inch Dual Bevel Sliding Miter Saw
Best for: wide crosscuts and bi-directional bevel work
- Blade Diameter
- 10"
- Amperage
- 15 Amp
- No-Load Speed
- 5000 RPM
- Power Source
- Corded
- Dimensions
- 30.3 × 20.9 × 27.6 inches
- Weight
- 39.7 pounds
View on Amazon: VEVOR 10-Inch Dual Bevel Sliding Miter Saw Affiliate link
This VEVOR model is a 10-inch sliding compound miter saw built with a 15-amp motor running at 5,000 RPM. You get dual-bevel capability for angled cuts in both directions, an axial sliding system for wider workpieces, and an integrated LED cut line guide. Weighing 39.7 pounds on an aluminum base, it fits workshops where you need crosscutting capacity and bevel versatility without mounting a stationary cast iron machine.
Pros
- 15-amp motor delivers 5,000 RPM no-load speed
- Dual-bevel capability allows bi-directional angle cuts
- Axial sliding system handles wider crosscut boards
- Integrated LED guide projects cut alignment lines
- Aluminum base keeps total weight to 39.7 pounds
Cons
- Occupies a 30.3-inch by 20.9-inch bench footprint
- Does not include a mobile or folding wheeled stand
Good fit if
- You need dual-bevel angles without flipping your lumber.
- You want axial sliding travel to cut wider stock.
- You prefer an LED alignment guide over standard sight lines.
Skip if
- You need to rip down large plywood sheets.
- You require a cordless battery-powered cutting setup.
Verdict: VEVOR 10-Inch Dual Bevel Sliding Miter Saw combines a 15-amp motor with axial sliding travel for clean crosscuts. Its dual-bevel setup and LED alignment guide provide precise angle management for detailed woodworking projects.
DEWALT 12-Inch Single-Bevel Compound Miter Saw
Best for: crosscutting dimensional lumber and tall baseboard trim
- Blade Diameter
- 12-Inch
- Amperage
- 15-Amp
- Dimensions
- 10.5 × 8.6 × 7.44 inches
- Weight
- 42.8 pounds
View on Amazon: DEWALT 12-Inch Single-Bevel Compound Miter Saw Affiliate link
This DEWALT 12-inch compound miter saw features a 15-amp motor and a stainless-steel miter detent plate with 14 positive stops. You get crosscut capacities up to 2x8 dimensional lumber at 90 degrees and 2x6 at 45 degrees, plus vertical support for 5-1/2-inch baseboards against the tall sliding fence. It suits you if you need large-blade cutting capacity for dimensional lumber crosscuts and molding.
Pros
- 15-amp motor with 12-inch blade diameter
- Stainless-steel miter detent plate with 14 positive stops
- Tall sliding fence supports 5-1/2-inch base vertically
- Crosscut capacity reaches 2x8 lumber at 90 degrees
Cons
- Single bevel tilts mainly left to 48 degrees and only 3 degrees right
- Weight is 42.8 pounds with no stand included
- Crosscut capacity tops out at 2x8 lumber without a sliding arm
Good fit if
- You crosscut 2x8 dimensional lumber at 90 degrees or 2x6 at 45 degrees.
- You support baseboards up to 5-1/2 inches vertically against the fence.
- You need 14 positive miter stops on a stainless-steel plate.
Skip if
- You need a table saw to rip wide sheet goods.
- You need full dual-bevel tilting capability in both directions.
- You need a lighter tool under 40 pounds for portability.
Verdict: DEWALT 12-Inch Single-Bevel Compound Miter Saw delivers a 15-amp motor and 14 positive stops for crosscutting lumber up to 2x8. It provides sturdy vertical fence support for trim work without taking up sliding-rail depth.
DEWALT 60V MAX 7-1/4-Inch Circular Saw
Best for: cordless framing cuts requiring deep blade reach
- Blade Diameter
- 7-1/4-Inch
- Cutting Depth 90
- 2-7/16-inch
- Voltage
- 60V MAX*
- Dimensions
- 18 × 9 × 8.2 inches
- Weight
- 10.9 pounds
View on Amazon: DEWALT 60V MAX 7-1/4-Inch Circular Saw Affiliate link
This cordless rear-handle framing saw runs on a 60V MAX battery platform with a brushless motor. You get a 7-1/4-inch blade with a left-side orientation, delivering a 2-7/16-inch cutting depth at 90 degrees. It features a 53-degree bevel capacity, an electronic blade brake, and a magnesium shoe. This tool suits you if you need deep cordless framing cuts and already own compatible DEWALT 60V batteries.
Pros
- 2-7/16-inch cutting depth at 90 degrees
- 53-degree bevel capacity with stops at 22.5 and 45 degrees
- Electronic brake stops blade when trigger is released
- Integrated dust blower and magnesium shoe
- Onboard blade wrench storage and built-in rafter hook
Cons
- Tool only format excludes battery and charger
- Bare tool weight is 10.9 pounds before battery installation
Good fit if
- You need a blade-left, rear-handle orientation for clear line of sight.
- You require cutting depths up to 2-7/16 inches at 90 degrees.
- You already own DEWALT 60V MAX batteries.
Skip if
- You need a stationary table saw with a rip fence.
- You need a saw package that includes a battery and charger.
Verdict: DEWALT 60V MAX 7-1/4-Inch Circular Saw delivers 2-7/16-inch cutting depth and up to 53-degree bevel cuts for framing tasks. Its rear-handle design and electronic brake offer high capability if you run 60V MAX batteries.
DEWALT 20V MAX 6-1/2-Inch Cordless Circular Saw
Best for: portable cordless cutting with included battery
- Blade Diameter
- 6-1/2-Inch
- Voltage
- 20V MAX*
- Power Source
- Cordless
- Dimensions
- 15.9 × 12 × 8.75 inches
- Weight
- 7.6 pounds
View on Amazon: DEWALT 20V MAX 6-1/2-Inch Cordless Circular Saw Affiliate link
This cordless circular saw features a 6-1/2-inch blade diameter and runs on a 20V MAX battery platform. It includes a brushless motor, a 5.0Ah battery, a charger, and an electric brake that stops the blade when you release the trigger. The tool-free bevel adjusts from 0 to 50 degrees. At 7.6 pounds, it suits you if you need a portable cutting option with included power accessories.
Pros
- Includes 20V MAX 5.0Ah battery and charger
- Tool-free bevel capacity from 0 to 50 degrees
- Electric brake stops blade upon trigger release
- Brushless motor design
- Built-in rafter hook for jobsite storage
Cons
- Smaller 6-1/2-inch blade diameter compared to 7-1/4-inch models
- Handheld design lacks a dedicated stationary table and rip fence
Good fit if
- You need a complete cordless cutting kit with an included battery and charger.
- You want bevel cutting capability up to 50 degrees.
- You prefer a lightweight 7.6-pound handheld saw.
Skip if
- You need a stationary table saw with a rip fence.
- You require a larger 7-1/4-inch or 10-inch blade capacity.
Verdict: DEWALT 20V MAX 6-1/2-Inch Cordless Circular Saw delivers portable handheld cutting with an electric brake, brushless motor, and an included 5.0Ah battery kit. It provides flexible beveling up to 50 degrees without requiring a stationary table setup.
DEWALT 10-Inch Single-Bevel Compound Miter Saw
Best for: Cross cuts and jobsite trim work
- Blade Diameter
- 10-Inch
- Amperage
- 15-Amp
- Dimensions
- 24.8 × 20 × 17.7 inches
- Weight
- 38.1 pounds
View on Amazon: DEWALT 10-Inch Single-Bevel Compound Miter Saw Affiliate link
This DEWALT tool is a 10-inch single-bevel compound miter saw powered by a 15-amp motor. It weighs 31 pounds, making it easy for you to transport between job sites. The saw handles 2x6 dimensional lumber at 90 degrees and supports 4-1/4-inch base molding against its tall sliding fence. It suits you if you need dedicated cross-cutting and miter-angle accuracy rather than sheet-ripping capabilities.
Pros
- 15-amp motor provides standard cutting power for dimensional lumber
- Stainless-steel miter detent plate features 14 positive stops
- Tall sliding fence supports 4-1/4-inch base molding vertically
- Weighs 31 pounds for portable transport
Cons
- Bevel range is limited to 0 to 48 degrees left and only 0 to 3 degrees right
- Cross-cut capacity reaches 2x6 lumber at 90 degrees without sliding extension
Good fit if
- You need a portable 31-pound saw for cross-cutting lumber up to 2x6.
- You cut vertical base trim up to 4-1/4 inches against a tall fence.
- You want 14 positive miter stops for fast angle setup.
Skip if
- You need to rip wide plywood sheets lengthwise.
- You require equal dual-bevel tilting in both directions.
Verdict: DEWALT 10-Inch Single-Bevel Compound Miter Saw delivers reliable 15-amp power and 14 positive stops for common framing and trim cuts. Its 31-pound build offers dependable cross-cutting precision without excessive bulk.
DOVAMAN 12-Inch Dual-Bevel Sliding Miter Saw
Best for: wide compound cuts in stationary workshops
- Blade Diameter
- 12-Inch
- Amperage
- 15-Amp
- No-Load Speed
- 3800 RPM
- Dimensions
- 21 × 21 × 34 inches
- Weight
- 53.9 pounds
View on Amazon: DOVAMAN 12-Inch Dual-Bevel Sliding Miter Saw Affiliate link
This is a 12-inch dual-bevel sliding compound miter saw powered by a 15-amp motor running at 3,800 rpm. It delivers a maximum cutting capacity of 4.2 inches by 13 inches, supported by a built-in laser guide and nine angle presets. At 53.9 pounds, it suits your workshop if you need broad crosscut capacity for wide boards and compound angle cuts without moving the workpiece.
Pros
- 15-amp pure copper motor with 3,800 rpm speed
- Large 4.2-inch by 13-inch cutting capacity
- Integrated laser guide and nine base angle presets
- Comes with 40-tooth blade, material clamp, and dust bag
Cons
- Substantial weight at 53.9 pounds limits mobility
- May require angle alignment checks before first use
Good fit if
- You cut wide stock up to 13 inches across.
- You need 45-degree bevel cuts in both directions.
- You want visual alignment aid from a built-in laser guide.
Skip if
- You require a portable saw for frequent transport between job sites.
- You need a dedicated table saw for long rip cuts.
Verdict: DOVAMAN 12-Inch Dual-Bevel Sliding Miter Saw provides substantial 4.2-by-13-inch cutting capacity and dual-bevel flexibility for wide boards. Its 53.9-pound mass makes it best suited for dedicated bench setups.
Evolution 8-1/4-Inch Convertible Miter and Table Saw
Best for: mixed material cutting in tight spaces
- Blade Diameter
- 8-1/4"
- Rip Capacity
- 1-1/2"
- Amperage
- 12 A
- Dimensions
- 15.7 × 16.5 × 12.8 inches
- Weight
- 28.6 pounds
View on Amazon: Evolution 8-1/4-Inch Convertible Miter and Table Saw Affiliate link
The Evolution R8MTS is a 2-in-1 convertible miter and table saw with an 8-1/4-inch blade and 12-amp motor. It features a 1-1/2-inch rip capacity and a compact 16-7/8-inch footprint. This unit handles wood, steel, and aluminum with one TCT blade. Its lightweight 28.6-pound build suits tight workshops and DIYers needing multi-material versatility without changing blades.
Pros
- Converts between miter and table saw modes
- Cuts wood, steel, and aluminum with one blade
- 12-amp high-torque motor
- Cast aluminum table top for flat surface
Cons
- Limited 1-1/2-inch rip capacity
- Smaller 8-1/4-inch blade diameter
- No included dust extraction hose
Good fit if
- You need to cut metal and wood
- You have limited workshop space
- You want a lightweight portable tool
Skip if
- You require deep rip capacity
- You need a standard 10-inch blade
- You only cut hardwood lumber
Verdict: Evolution R8MTS 8-1/4-Inch Combo Saw is a specialized tool for users who cut mixed materials like steel and wood in tight spaces. It is not suitable for standard woodworking tasks requiring larger cuts.
Evolution 10-Inch Dual Bevel Sliding Miter Saw
Best for: multi-material cutting including steel and wood
- Blade Diameter
- 10"
- Power Source
- Corded
- Dimensions
- 16 × 3 × 1 inches
- Weight
- 44.8 pounds
View on Amazon: Evolution 10-Inch Dual Bevel Sliding Miter Saw Affiliate link
This Evolution R255SMS-DB+ is a 10-inch dual bevel sliding miter saw designed for multi-material cutting. It operates on corded power and weighs 44.8 pounds. The saw features a 45° to 45° dual bevel range and a 50° to 50° miter angle. It cuts wood, composite decking, mild steel, and plastic with one blade. This tool suits users who need a single saw for mixed materials.
Pros
- 10-inch blade diameter for versatile cutting capacity
- Dual bevel capability with 45° left and right angles
- Cuts wood, mild steel, and composite decking with one blade
- 50° to 50° miter angle range for precise cuts
Cons
- Heavier build at 44.8 pounds reduces portability
- Corded power limits use in remote areas
- No included blade specified in the data
Good fit if
- You need to cut mild steel and wood with one tool
- You require dual bevel cuts for complex framing or trim
- You work in a shop with reliable power access
Skip if
- You prioritize lightweight tools for frequent site moves
- You require cordless operation for off-grid projects
- You only cut softwood and do not need metal cutting
Verdict: Evolution R255SMS-DB+ 10-Inch Dual Bevel Miter Saw is a robust option for users who frequently cut mixed materials like steel and wood. Its dual bevel design and multi-material blade capability make it ideal for professional workshops rather than casual hobbyists.
Evolution 10-Inch Multi-Material Sliding Miter Saw
Best for: cutting mixed materials without swapping blades
- Blade Diameter
- 10"
- Dimensions
- 23 × 3.56 × 11.8 inches
- Weight
- 41.8 pounds
View on Amazon: Evolution 10-Inch Multi-Material Sliding Miter Saw Affiliate link
This is a 10-inch sliding miter saw built for multi-material cutting. You get a single blade that cuts wood, wood with embedded nails, composite decking, mild steel, and plastic. The unit provides a 0° to 45° bevel angle and a 50° to 50° miter range. It weighs 41.8 pounds and includes a 3-meter cable. It suits you if you need versatile crosscuts across mixed materials without changing blades.
Pros
- Cuts wood, wood with embedded nails, mild steel, composite, and plastic with one blade
- Miter range reaches 50° left to 50° right with 0° to 45° bevel capability
- Includes dual quick-release clamps, dust bag, taller fences, and slide rail protector
- Covered by a 3-year warranty
Cons
- Bevel tilting is limited to a single direction from 0° to 45°
- Weighs 41.8 pounds, which reduces overall portability
Good fit if
- You need to cut mild steel, plastics, and wood using one 10-inch blade.
- You require up to 50° miter angles in both directions.
- You want included quick-release clamps and integrated carry handles.
Skip if
- You require dual-bevel capability rather than single 0° to 45° bevel cuts.
- You need a bench tool lighter than 41.8 pounds for routine transport.
Verdict: Evolution 10-Inch Multi-Material Sliding Miter Saw delivers broad 50° miter angles and cuts mixed materials without blade swaps. Its 41.8-pound build and included clamps provide dedicated support for multi-material workshops.
Bosch CCS180 18V 6-1/2 in Cordless Circular Saw
Best for: cordless framing and precise cut visibility
- Blade Diameter
- 6-1/2 In.
- Cutting Depth 90
- 2 in.
- Voltage
- 18V
- Dimensions
- 13.4 × 8.9 × 11.2 inches
- Weight
- 6.6 pounds
View on Amazon: Bosch CCS180 18V 6-1/2 in Cordless Circular Saw Affiliate link
This Bosch cordless circular saw uses an 18V battery system and a 6-1/2-inch blade. It cuts through 2-inch material at 90 degrees. The blade-left design keeps your view of the cut line clear. It weighs 6.6 pounds and fits in tight spaces. You get reliable power from the CORE18V battery. This tool suits framers who need mobility and precision without cords.
Pros
- 18V battery compatibility with all Bosch 18V lithium-ion batteries
- Blade-left design for clear cut-line visibility
- 50-degree bevel range for enhanced versatility
- Cuts through 2-inch material at 90 degrees
- Dust blower keeps the cut line visible
Cons
- 6-1/2-inch blade limits depth compared to standard 7-1/4-inch models
- Cordless operation requires managing battery charge
- Smaller blade diameter reduces maximum cutting capacity
Good fit if
- You need cordless mobility for framing tasks
- You prefer blade-left visibility for accuracy
- You already use the Bosch 18V battery system
Skip if
- You require a full-size 7-1/4-inch blade
- You need a stationary table saw for rip cuts
- You prefer corded tools for unlimited runtime
Verdict: Bosch 18V 6-1/2 In. Cordless Circular Saw delivers precise cuts with a blade-left design. It fits framers who value mobility and clear visibility over maximum cutting depth.
Specifications side by side
| Spec | SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand | SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw | DEWALT 7-1/4-Inch Cordless Miter Saw | DEWALT 20V MAX 5-Inch Cordless Band Saw | SKIL TS6338 8-1/4-Inch Jobsite Saw | VEVOR 10-Inch Dual Bevel Sliding Miter Saw | DEWALT 12-Inch Single-Bevel Compound Miter Saw | DEWALT 60V MAX 7-1/4-Inch Circular Saw | DEWALT 20V MAX 6-1/2-Inch Cordless Circular Saw | DEWALT 10-Inch Single-Bevel Compound Miter Saw | DOVAMAN 12-Inch Dual-Bevel Sliding Miter Saw | Evolution 8-1/4-Inch Convertible Miter and Table Saw | Evolution 10-Inch Dual Bevel Sliding Miter Saw | Evolution 10-Inch Multi-Material Sliding Miter Saw | Bosch CCS180 18V 6-1/2 in Cordless Circular Saw |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Diameter | 10-Inch | 10" | 7-1/4" | not stated | 8-1/4-Inch | 10" | 12-Inch | 7-1/4-Inch | 6-1/2-Inch | 10-Inch | 12-Inch | 8-1/4" | 10" | 10" | 6-1/2 In. |
| Rip Capacity | not stated | not stated | not stated | not stated | 24.5-inch | not stated | not stated | not stated | not stated | not stated | not stated | 1-1/2" | not stated | not stated | not stated |
| Amperage | 15 Amp | 15 AMP | not stated | not stated | 15 Amp | 15 Amp | 15-Amp | not stated | not stated | 15-Amp | 15-Amp | 12 A | not stated | not stated | not stated |
| No-Load Speed | not stated | 4,800 RPM | not stated | not stated | not stated | 5000 RPM | not stated | not stated | not stated | not stated | 3800 RPM | not stated | not stated | not stated | not stated |
| Cutting Depth 90 | not stated | not stated | not stated | not stated | 2-1/2-inch | not stated | not stated | 2-7/16-inch | not stated | not stated | not stated | not stated | not stated | not stated | 2 in. |
| Voltage | not stated | not stated | 20V MAX | 20V MAX | not stated | not stated | not stated | 60V MAX* | 20V MAX* | not stated | not stated | not stated | not stated | not stated | 18V |
| Power Source | not stated | not stated | Cordless | not stated | not stated | Corded | not stated | not stated | Cordless | not stated | not stated | not stated | Corded | not stated | not stated |
| Intended Use | Jobsite | not stated | not stated | not stated | Jobsite | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Dimensions | 1 × 1 × 1 inches | 35.4 × 22.4 × 14.2 inches | 25.4 × 21 × 16.1 inches | 22.3 × 14.4 × 8.7 inches | 26 × 22.8 × 17.2 inches | 30.3 × 20.9 × 27.6 inches | 10.5 × 8.6 × 7.44 inches | 18 × 9 × 8.2 inches | 15.9 × 12 × 8.75 inches | 24.8 × 20 × 17.7 inches | 21 × 21 × 34 inches | 15.7 × 16.5 × 12.8 inches | 16 × 3 × 1 inches | 23 × 3.56 × 11.8 inches | 13.4 × 8.9 × 11.2 inches |
| Weight | 51.2 pounds | 39.4 pounds | 30 pounds | 12.4 pounds | not stated | 39.7 pounds | 42.8 pounds | 10.9 pounds | 7.6 pounds | 38.1 pounds | 53.9 pounds | 28.6 pounds | 44.8 pounds | 41.8 pounds | 6.6 pounds |
| Size | 10'' | 10'' | One Size | One Size | not stated | 10 in | One Size | One Size | 6-1/2-Inch | One Size | 12 Inch | 8-1/4 in | 10 in | 10" | not stated |
| Color | 10" Table Saw | Multi | Black, Yellow | Multi | not stated | Black | Multi | Multi | Multi | Multi | Black | Black | Multicolor | Multicolor | Blue |
| Model | TS6307-00 | MS6305-00 | DCS361B | DCS374B | TS6338-00 | J1G-ZP33-K255D | DWS715 | DCS577B | DCS565P1 | DWS713 | 1247 | R8MTS | R255SMSDB+ | R255SMS+ | CCS180-B15 |
Trade-Offs to Expect Under $300
Choosing tools Under $300 involves clear hardware limits. Corded models in this lineup max out at 15-amp motors, while cordless alternatives rely on 20V MAX or 60V MAX battery systems. Table saw blade diameter reaches at most 10 inches, stepping down to 8-1/4 inches on compact options. You also see mounting styles confined entirely to jobsite and portable frames weighing between 7.6 pounds and 53.9 pounds. Published specs omit continuous horsepower ratings, and no-load speed ratings appear on only isolated models like the 5000 RPM miter saw.
- Blade diameter: Table saws stop at 10 inches, while compact versions scale down to 8-1/4 inches.
- Amperage: Corded motor capacity caps at 15 amp across all listed stationary tools.
- Mounting style: Form factors remain restricted to portable jobsite frames and benchtop units under 54 pounds.
How We Picked These Saws
You see 15 options selected from listings matching the Under $300 range. Every detail comes directly from published manufacturer specifications, without physical handling. Each entry shows only one variant per product family to keep choices clear. The guide places products in stock first, then orders them by Amazon sales rank so better-selling tools appear first.
Stock and listings update at least daily. Because items must remain Under $300 to stay listed, models move in or out of this guide as prices change. This offers you an objective view based strictly on active data, helping you compare published capabilities for 2026.
Key Specifications to Compare Before Buying
-
Evaluate Power Source Options
You need to decide between continuous wall power and cordless portability. Corded tools provide continuous power through a 15-amp motor, which prevents battery downtime during long jobs. Cordless tools run on battery platforms such as 20V MAX or 60V MAX. A tool like the DEWALT 60V MAX 7-1/4-Inch Circular Saw offers high-voltage performance without a cord, but it requires charged packs to operate. Check whether the package includes batteries or requires you to supply compatible power packs before making your final selection.
-
Check Fence Adjustment Systems
Parallel rip accuracy depends on the fence setup. Look for a rack-and-pinion fence mechanism if you want smooth, micro-adjustable travel that stays square to the blade without manual bumping. The SKIL 10-Inch 15-Amp Jobsite Table Saw includes this rack-and-pinion gear system to keep rip adjustments uniform and accurate across repetitive cuts. If a model lacks mechanical gearing, you will need to align the fence manually and measure each cut independently. Inspect the fence rail specifications to confirm how the guide locks into position before cutting.
-
Review Bevel Cutting Flexibility
Examine whether a saw tilts in one direction or both directions. Single-bevel models tilt to the left, which requires you to flip long boards around when cutting matching angles. Dual-bevel designs let you tilt the saw head both left and right, saving time and keeping long stock oriented in the same position. The DOVAMAN 12-Inch Dual-Bevel Sliding Miter Saw provides dual-bevel tilting alongside a 4.2-by-13-inch cut capacity. If your work involves molding, trim, or compound rafters, selecting dual-bevel capability reduces material handling during angled work.
-
Compare No-Load Speed Ratings
Check the no-load speed rating to understand blade rotation velocity. Faster rotational speeds help you produce cleaner edges and reduce tear-out in smooth lumber or trim. The Prostormer 12-Inch 5000 RPM Sliding Miter Saw delivers a 5000 RPM no-load speed with its 15-amp motor, maintaining rapid rotation through wide boards. Saws with lower speeds may require slower feed rates to prevent bogging down in dense materials. Compare the RPM rating on the specification sheet against your primary materials to ensure the motor spins fast enough for your intended finish quality.
-
Examine Positive Miter Stops
When choosing a miter saw, check the number of positive miter stops integrated into the base plate. Positive detents lock the cutting head into commonly used angles, such as 22.5 or 45 degrees, without requiring manual angle calibration each time. The DEWALT 12-Inch Single-Bevel Compound Miter Saw features 14 positive stops along its miter scale for swift indexing. If you frequently cut framing joints or crown molding, having more pre-set stops accelerates setup and helps maintain accurate, repeatable angles throughout your project.
Frequently asked questions
Which table saw is best for general jobsite ripping?
The SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand is the top pick for general ripping. It features a rack-and-pinion fence for accurate cuts and handles 4x4 lumber. The 51.2-pound weight and folding stand make it a mobile workhorse for on-site tasks requiring full 10-inch capacity.
What is the lightest portable saw in this list?
The Bosch CCS180 18V Cordless Circular Saw is the lightest option at 6.6 pounds. It offers an 18V platform for portable handheld cutting. Its compact size makes it ideal for users prioritizing minimal weight and easy transport over stationary table saw capabilities.
Can I cut wide boards with a sliding miter saw?
Yes, several models support wide crosscuts. The VEVOR 10-Inch Dual Bevel Sliding Miter Saw uses axial sliding travel for clean cuts. The DOVAMAN 12-Inch model handles 4.2-by-13-inch capacity, making it suitable for wide boards in stationary workshop setups requiring extensive compound cutting flexibility.
Which saw is best for cordless trim work?
The DEWALT 7-1/4-Inch Cordless Miter Saw is ideal for portable trim work. It features 11 miter stops and clear cut line alignment. If you already own 20V MAX batteries, this tool provides solid capability for detailed trim tasks without requiring a power cord.
What is the best option for cutting mixed materials?
The Evolution 10-Inch Multi-Material Sliding Miter Saw cuts mixed materials without blade swaps. It offers 50-degree miter angles and includes clamps for support. Its 41.8-pound build provides dedicated stability for workshops handling diverse materials like metal, wood, and plastic simultaneously.
Which saw offers the deepest cutting depth?
The DEWALT 60V MAX Circular Saw delivers a 2-7/16-inch cutting depth. It also supports up to 53-degree bevel cuts for framing tasks. This model requires 60V MAX batteries and features a rear-handle design with an electronic brake for high performance.
Is there a saw best for sheet material ripping?
The SKIL TS6338 8-1/4-Inch Jobsite Saw suits contractors needing wide rip capacity for sheet materials. It features a 15-amp motor and prioritizes parallel fence accuracy. This model fits users who value portability and precise sheet ripping over deep cutting depth.
Which model is best for portable deep cutting?
The DEWALT 20V MAX 5-Inch Cordless Band Saw provides 5 inches of cutting capacity. It features brushless variable-speed control in a portable frame. This 12.4-pound tool is dependable for handheld cutting performance if you already utilize the DEWALT 20V MAX battery platform.
See also
- best table saws under 500
- best 10-Inch table saws
- best 8 1 4 inch table saws
- best table saws under 150
- best table saws under 200
- Best 8-Inch Table Saws: 15 Spec-Based Picks
- 15 Best Table Saws with 15 Amp, Compared
- Best Table Saws with 6.7 Amp in 2026: 15 Picks Ranked by Specs
- best dining tables under 300
- best subwoofers under 300














