Best Delta Table Saws: 9 Models Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This guide covers the best delta table saws and related cutting tools from Delta. We compared 9 models based strictly on their published specifications. The lineup includes 10-inch table saws, sliding miter saws, scroll saws, and heavy-duty cabinet saws. The top pick is the Delta 10-Inch Table Saw with 32.5-Inch Rip Capacity, which leads for wide rips and stacked dado cuts. You will find options ranging from portable 30-pound units to 674-pound industrial machines. All selections rely on data like motor power, weight, and cutting capacity found in the product listings.
Quick picks
Our 9 picks
Delta 10-Inch Table Saw with 32.5-Inch Rip Capacity
Best for: wide rips and stacked dado cuts
- Blade Diameter
- 10 Inch
- Rip Capacity
- 32.5 Inch
- Amperage
- 15 Amp
- Dimensions
- 27 × 19 × 35 inches
- Weight
- 77 pounds
View on Amazon: Delta 10-Inch Table Saw with 32.5-Inch Rip Capacity
This Delta 10-inch table saw runs on a 15-amp motor and features a 32.5-inch rip capacity with rack and pinion fence rails. It also accepts stacked dado sets up to 13/16 inches wide by 8 inches in diameter. Weighing 77 pounds, it gives you large sheet-cutting ability in a compact footprint. It suits you if you need wide rip cuts and dado grooving.
Pros
- 32.5-inch rip capacity handles wide boards and panels
- Rack and pinion fence rails provide precise adjustments
- Accepts up to 13/16-inch by 8-inch stacked dado sets
- 15-amp motor cuts hardwoods and treated lumber
Cons
- 77-pound weight makes solo transport heavy
- No integrated stand or rolling cart listed
Good fit if
- You need to rip wide panels up to 32.5 inches.
- You cut joinery using stacked dado blades up to 13/16 inch wide.
Skip if
- You want a stationary cabinet saw with higher horsepower.
- You require an ultra-lightweight saw under 50 pounds for transport.
Verdict: Delta 10-Inch Table Saw with 32.5-Inch Rip Capacity delivers generous rip capacity, dado support, and a 15-amp motor in a 77-pound frame. It is a capable choice if you need broad cutting range without a full-size cabinet saw footprint.
Delta 20-Inch Variable Speed Scroll Saw
Best for: intricate curve cutting and detailed fretwork
- Amperage
- 1.3 Amps
- Cutting Depth 90
- 2-1/8 in.
- Dimensions
- 30 × 20 × 13 inches
- Weight
- 60 pounds
This tool is a 20-inch variable-speed scroll saw rather than a traditional table saw. It features a 1.3-amp motor delivering 400 to 1,750 strokes per minute, a 16 by 24-inch cast-iron table, and a maximum cutting depth of 2-1/8 inches at 90 degrees. You get a tool-free blade tensioning lever and dual-tilting table, making it suited for detailed curve work.
Pros
- Electronic variable speed ranges from 400 to 1,750 strokes per minute
- Large 16 by 24-inch cast-iron table tilts 0 to 45 degrees left and right
- Tool-free blade tensioning lever and lifting upper arm simplify blade changes
- Front-mounted controls include speed dial, power switch, and flexible dust blower
Cons
- Cutting depth is limited to 2-1/8 inches at 90 degrees
- Low 1.3-amp motor capacity is not designed for ripping lumber
- Lacks a rip fence and miter gauge standard on table saws
Good fit if
- You need to cut intricate curved shapes and fretwork.
- You want variable stroke speeds between 400 and 1,750 SPM.
- You require a work table that bevels up to 45 degrees both left and right.
Skip if
- You need a standard table saw for ripping wide boards and sheet goods.
- You require more than 2-1/8 inches of cutting depth.
- You need a high-power motor for thick dimensional lumber.
Verdict: Delta 20-Inch Variable Speed Scroll Saw provides a 20-inch throat and tilting cast-iron table for precise curve cutting. It fits detailed craft cuts rather than standard straight-line table saw work.
Delta 10-Inch Sliding Compound Miter Saw
Best for: portable crosscuts on wide dimensional lumber
- Blade Diameter
- 10 in.
- Amperage
- 15 Amps
- No-Load Speed
- 5,500 RPM
- Voltage
- 120V
- Dimensions
- 27.8 × 27.8 × 14.5 inches
- Weight
- 30 pounds
This Delta 10-inch compound sliding miter saw runs on a 15-amp, 120-volt motor spinning at 5,500 RPM. It handles crosscuts on nominal 2-by-12 lumber at a full 45-degree bevel tilt to the left. Weighing under 30 pounds, it is portable across work areas. If you need a dedicated crosscut and bevel tool rather than a standard ripping setup, this lightweight unit fits job-to-job trimming tasks.
Pros
- 15-amp motor produces 5,500 RPM no-load speed
- Cuts nominal 2 in. x 12 in. at a full 45-degree left bevel
- Spindle lock holds the 5/8-inch arbor for blade changes
- Weighs under 30 pounds for straightforward transport
Cons
- Bevel tilts only to the left from 0 to 45 degrees
- Lacks ripping capacity found on standard table saws
Good fit if
- You need to crosscut boards up to nominal 2x12 dimensions.
- You want a lightweight cutting machine that weighs under 30 pounds.
- You require 5,500 RPM blade speed on standard 120V power.
Skip if
- You need dual-bevel tilting in both directions.
- You need to make rip cuts through wide sheet goods.
Verdict: Delta 10-Inch Sliding Compound Miter Saw provides high blade speed and wide crosscut capacity in a 29.5-pound frame. It serves as a dedicated angled cutting machine when you do not need ripping functionality.
Delta 10-Inch Dual Bevel Sliding Miter Saw
Best for: angled crosscuts and bevel trimming
- Blade Diameter
- 10”
- Amperage
- 15 amp
- No-Load Speed
- 4,000 RPM
- Voltage
- 120V
- Dimensions
- 29.5 × 22.5 × 20 inches
- Weight
- 62 pounds
This Delta unit is a 10-inch dual bevel sliding compound miter saw designed for angled crosscuts. It runs on a 15-amp, 120-volt motor spinning at 4,000 RPM, giving you up to 5.5 inches of cutting thickness. The dual-bevel setup angles 45 degrees left and right, paired with a shadow cutline indicator. You will find it suits your workspace if you need dedicated miter and bevel cutting alongside your table saw setup.
Pros
- 15-amp motor delivering 4,000 RPM with an electric blade brake
- Dual-bevel range up to 45 degrees left and right with 7 positive stops
- Miter capacity of 50 degrees left and 60 degrees right with 10 detents
- Shadow guide cutting line projects cut path directly onto workpiece
Cons
- Heavy benchtop footprint weighing at least 55 pounds
- Short 7-foot power cord limits reach from wall outlets
Good fit if
- You need dual-bevel capability up to 45 degrees in both directions.
- You cut stock up to 5.5 inches thick using a 10-inch blade.
Skip if
- You need a rip-cutting table saw rather than a sliding crosscut saw.
- You need a portable bench tool that weighs under 50 pounds.
Verdict: Delta 10-Inch Dual Bevel Sliding Miter Saw delivers 4,000 RPM and wide bevel angles for precise crosscutting. It provides reliable angled cuts with its 15-amp motor and shadow guide system.
Delta 5 HP Unisaw with 36-Inch Fence
Best for: high-demand production cutting in permanent shops
- Horsepower
- 5 HP
- Voltage
- 220 V
- Dimensions
- 44 × 40 × 90 inches
- Weight
- 644 pounds
This cabinet table saw delivers heavy-duty cutting capability with a 5-horsepower American Marathon motor requiring a 220-volt connection. You get a 36-inch Biesemeyer fence system designed for precision cuts and small stock, paired with a bevel dial that adjusts to within one-quarter degree. At 644 pounds with a single-cast trunnion, it suits dedicated workshop spaces where maximum stability and continuous production cutting take priority.
Pros
- 5-horsepower, 220-volt American Marathon motor built for production environments
- Single-cast trunnion system designed for vibration control
- Biesemeyer fence system supports precision ripping and small stock
- Bevel dial adjusts blade angle to within 1/4 degree
Cons
- Weighs 644 pounds, preventing easy relocation
- Requires a dedicated 220-volt power connection
- Large footprint requires substantial dedicated floor space
Good fit if
- You have a dedicated 220-volt circuit available in your shop.
- You need a 5 HP motor for continuous production ripping.
- You require fine blade angle adjustments down to 1/4 degree.
Skip if
- You only have access to standard 120-volt electrical circuits.
- You need a portable saw that one person can move.
- You have a compact workshop with limited floor clearance.
Verdict: Delta 5 HP Left Tilt Unisaw with 36-Inch Fence provides industrial-grade power and vibration control for stationary workshops. Its heavy mass and 220-volt motor are built specifically for demanding production tasks.
Delta 10-Inch Table Saw with Digital Angle Gauge
Best for: wide ripping cuts and precise bevel alignment
- Blade Diameter
- 10 in
- Rip Capacity
- 32.5 in
- Amperage
- 15 A
View on Amazon: Delta 10-Inch Table Saw with Digital Angle Gauge
This Delta package couples a 10-inch contractor-grade table saw with a magnetic digital angle gauge. You get a 15-amp motor, rack-and-pinion fence rails, and a 32.5-inch rip capacity for handling wide sheet goods. It also accepts stacked dado sets up to 13/16-inch wide by 8 inches in diameter. It suits woodworkers who want wide ripping capacity and a dedicated digital tool for setting precise blade angles.
Pros
- 32.5-inch rip capacity handles wide stock
- 15-amp motor runs standard blades and stacked dado sets up to 13/16 in. x 8 in.
- Rack and pinion fence rails enable controlled adjustments
- Includes magnetic digital angle gauge with auto-rotating display
- 5-year warranty coverage
Cons
- Dado throat plate is not included in this bundle style
- Overall table dimensions and tool weight are not specified
Good fit if
- You need a 32.5-inch rip capacity for ripping wide sheet goods.
- You run stacked dado sets up to 13/16 inch wide.
- You want an external magnetic digital gauge to verify blade angles.
Skip if
- You want a stationary cabinet saw instead of a 15-amp contractor-grade setup.
- You need the matching dado throat plate included in the package.
Verdict: Delta 10-Inch Table Saw with Digital Angle Gauge pairs a capable 15-amp cutting system and 32.5-inch rip capacity with an accurate magnetic measuring tool. It gives you solid cutting capacity and dependable rack-and-pinion fence adjustments for workshop tasks.
Delta Cruzer 10-Inch Dual Bevel Sliding Miter Saw
Best for: wide board crosscutting and trim applications
- Blade Diameter
- 10”
- Amperage
- 15-AMP
- No-Load Speed
- 4000 RPM
- Dimensions
- 29.5 × 20 × 22.5 inches
- Weight
- 60 pounds
View on Amazon: Delta Cruzer 10-Inch Dual Bevel Sliding Miter Saw
This Delta miter saw provides a 15-amp motor, a 10-inch blade, and a 4,000 RPM speed. It delivers up to 16 inches of crosscut capacity using dual-bevel sliding aluminum frame arms. Because it arrives fully assembled, you can set it up immediately for crosscuts and trim work. It suits you if you need wide crosscutting power in your workspace rather than a dedicated ripping table saw.
Pros
- 15-amp motor operating at 4,000 RPM
- 16-inch crosscut capacity with dual-bevel function
- Arrives fully assembled out of the box
- Aluminum frame arms equipped with heavy-duty bearings
Cons
- Heavy tool footprint at 60 pounds
- Requires a separate stand for elevated workspace mounting
- Crosscut miter configuration lacks table saw ripping capabilities
Good fit if
- You need up to 16 inches of crosscut capacity for trim and boards.
- You want a saw that arrives fully assembled without setup time.
- You require a 15-amp motor running at 4,000 RPM for dual-bevel cuts.
Skip if
- You need a dedicated table saw designed specifically for ripping sheet goods.
- You require a lightweight cutting tool that weighs less than 60 pounds.
Verdict: Delta Cruzer 10-Inch Dual Bevel Sliding Miter Saw delivers a 16-inch crosscut capacity and 15-amp power straight from the box. It offers reliable dual-bevel cutting for woodworkers who prioritize wide crosscuts over rip operations.
Delta 10-Inch Unisaw with 52-Inch Fence
Best for: large-panel ripping in dedicated production workshops
- Blade Diameter
- 10 in.
- Horsepower
- 3 HP
- Voltage
- 220 volt
- Dimensions
- 44 × 40 × 50 inches
- Weight
- 674 pounds
This stationary 10-inch cabinet table saw runs on a 3-horsepower, 220-volt motor. It pairs a 52-inch Biesemeyer fence system with an extension table and support legs for wide cuts. A single-cast trunnion reduces vibration, while the bevel dial adjusts blade tilt to one-quarter degree accuracy. Weighing 674 pounds, it suits you if you operate a permanent workshop space requiring high-capacity ripping and heavy-duty stability.
Pros
- 3-horsepower, 220-volt motor for production work
- 52-inch Biesemeyer fence with extension table and legs
- Single-cast trunnion system designed for vibration control
- Bevel dial tunes blade tilt within 1/4 degree
Cons
- Weighs 674 pounds, preventing easy relocation
- Requires a 220-volt electrical supply
- Ships in four separate boxes requiring assembly
Good fit if
- You need a 52-inch fence system to rip wide panels.
- You have a dedicated shop space with a 220-volt power hookup.
- You want a heavy cast-iron cabinet saw for reduced vibration.
Skip if
- You only have standard 120-volt circuits available.
- You need a portable saw that moves between job sites.
- You lack the floor space to house a 52-inch rail assembly.
Verdict: Delta 10-Inch Unisaw with 52-Inch Fence delivers industrial ripping capacity and 3-horsepower performance for stationary production shops. Its heavy cast build and wide extension table make it a solid choice when workshop space and 220-volt power are already in place.
Delta Unisaw 3 HP Table Saw with 36-Inch Fence
Best for: dedicated workshops requiring 220V stationary cutting
- Horsepower
- 3 HP
- Voltage
- 220 volt
- Dimensions
- 40 × 44 × 50 inches
View on Amazon: Delta Unisaw 3 HP Table Saw with 36-Inch Fence
Delta Unisaw 3 HP Table Saw with 36-Inch Fence provides heavy-duty workshop cutting. It runs on a 3-horsepower, 220-volt American Marathon motor paired with a single-cast trunnion system for vibration control. You get a 36-inch Biesemeyer fence system and a bevel dial accurate to within one-quarter degree. This cabinet saw suits woodworkers who need stationary cutting power and precise blade adjustments in dedicated shop spaces with high-voltage electrical setups.
Pros
- 3-horsepower, 220-volt American Marathon motor
- Single-cast trunnion system designed for vibration control
- Bevel dial tunes blade angle to within 1/4 degree
- Biesemeyer fence system supports cuts on small stock
Cons
- Requires a 220-volt power hookup
- Ships in four separate crates and packages requiring extensive assembly
- Large physical footprint measuring 40 by 44 by 50 inches
Good fit if
- You have a workshop with an existing 220-volt electrical connection.
- You want micro-bevel adjustments accurate to within 1/4 degree.
- You cut both standard stock and small pieces using a dedicated fence system.
Skip if
- You only have standard 120-volt electrical outlets.
- You need a portable saw that fits in compact work vehicles.
Verdict: Delta Unisaw 3 HP Table Saw with 36-Inch Fence offers robust cabinet-grade performance and precise bevel calibration. It handles continuous production work in dedicated shops wired for 220 volts.
Specifications side by side
| Spec | Delta 10-Inch Table Saw with 32.5-Inch Rip Capacity | Delta 20-Inch Variable Speed Scroll Saw | Delta 10-Inch Sliding Compound Miter Saw | Delta 10-Inch Dual Bevel Sliding Miter Saw | Delta 5 HP Unisaw with 36-Inch Fence | Delta 10-Inch Table Saw with Digital Angle Gauge | Delta Cruzer 10-Inch Dual Bevel Sliding Miter Saw | Delta 10-Inch Unisaw with 52-Inch Fence | Delta Unisaw 3 HP Table Saw with 36-Inch Fence |
|---|---|---|---|---|---|---|---|---|---|
| Blade Diameter | 10 Inch | not specified | 10 in. | 10” | not specified | 10 in | 10” | 10 in. | not specified |
| Rip Capacity | 32.5 Inch | not specified | not specified | not specified | not specified | 32.5 in | not specified | not specified | not specified |
| Amperage | 15 Amp | 1.3 Amps | 15 Amps | 15 amp | not specified | 15 A | 15-AMP | not specified | not specified |
| Horsepower | not specified | not specified | not specified | not specified | 5 HP | not specified | not specified | 3 HP | 3 HP |
| No-Load Speed | not specified | not specified | 5,500 RPM | 4,000 RPM | not specified | not specified | 4000 RPM | not specified | not specified |
| Cutting Depth 90 | not specified | 2-1/8 in. | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Voltage | not specified | not specified | 120V | 120V | 220 V | not specified | not specified | 220 volt | 220 volt |
| Dimensions | 27 × 19 × 35 inches | 30 × 20 × 13 inches | 27.8 × 27.8 × 14.5 inches | 29.5 × 22.5 × 20 inches | 44 × 40 × 90 inches | not specified | 29.5 × 20 × 22.5 inches | 44 × 40 × 50 inches | 40 × 44 × 50 inches |
| Weight | 77 pounds | 60 pounds | 30 pounds | 62 pounds | 644 pounds | not specified | 60 pounds | 674 pounds | not specified |
| Size | 10 inch | not specified | not specified | not specified | 5 HP 36" | not specified | not specified | 52" | not specified |
| Color | Black | Multicolor | Black, Grey | 10 Inch | Multicolor | not specified | 10 Inch | 3 Horse Power | Delta Gray, Black |
| Model | 36-6023 | 40-694 | S26-263L | 26-2241 | 36-L536 | not specified | 26-2310 | 36-L353 | 36-L336 |
Delta Table Saw Lineup Overview
The Delta range spans from compact miter saws to industrial cabinet units. The Delta 10-Inch Table Saw with 32.5-Inch Rip Capacity offers a balanced 77-pound frame for general use. For detailed work, the Delta 20-Inch Variable Speed Scroll Saw provides precise curve cutting. The Delta Cruzer 10-Inch Dual Bevel Sliding Miter Saw delivers 15-amp power for wide crosscuts. Shoppers needing heavy production should look at the Delta 5 HP Unisaw or the Delta 10-Inch Unisaw with 52-Inch Fence. These models feature 220-volt motors and massive cast-iron frames. They suit permanent workshops with ample space. The Delta lineup covers various blade diameters and horsepower ratings. You can select based on your specific cutting needs.
Where Delta Fits Your Shop
Delta covers a wide spectrum of stationary and portable tools. You can choose from lightweight 30-pound miter saws for crosscuts, mid-weight 77-pound table saws for ripping, or massive 600-plus-pound cabinet units for production. The range also includes specialized scroll saws for intricate curves. However, the lineup has gaps. There are no hybrid saws or compact contractor-style machines with integrated stands. You also will not find portable jobsite saws with rolling carts. If you need a lightweight, all-in-one portable unit, this brand does not offer it in this selection. You must choose between dedicated stationary workstations or separate, lighter cutting tools.
If you require demolition cuts, compare specifications across the best reciprocating saws with reciprocating saw.
How to choose the right one
-
Check rip capacity needs
Rip capacity determines the widest board you can cut. The Delta 10-Inch Table Saw with 32.5-Inch Rip Capacity offers generous space for wide panels. If you need to process large sheets, look for models with extended fences. The Unisaw with 52-Inch Fence provides maximum width for production work. Smaller capacities suit general joinery. Match the spec to your largest material width to avoid frequent repositioning.
-
Assess motor power
Motor power dictates cutting performance under load. The Delta 5 HP Unisaw delivers industrial-grade power for heavy production tasks. It requires 220-volt power and a dedicated circuit. Standard 15-amp models handle most home shop duties efficiently. The Delta Cruzer 10-Inch Dual Bevel Sliding Miter Saw uses a 15-amp motor for reliable crosscuts. Choose higher horsepower only if you plan to cut dense hardwoods continuously.
-
Evaluate blade diameter
Blade diameter affects cutting depth and compatibility. Most Delta table saws use a 10-inch blade, which is standard for general woodworking. This size balances speed and depth of cut. The Delta 10-Inch Sliding Compound Miter Saw also uses a 10-inch blade for crosscuts. Larger blades cut deeper but require more space. Verify the blade size matches your intended depth of cut requirements for your specific projects.
-
Consider workspace weight
Weight indicates stability and portability. The Delta 10-Inch Table Saw weighs 77 pounds, offering a stable base for ripping without being immovable. The Delta Unisaw with 52-Inch Fence weighs 674 pounds, designed for permanent installation. Lighter miter saws, around 30 pounds, are easier to transport. Ensure your floor can support the mass. Heavier units reduce vibration during heavy cuts, improving accuracy for precision work.
-
Review fence system
The fence system controls accuracy and parallelism. The Delta 10-Inch Table Saw with Digital Angle Gauge features rack-and-pinion fence adjustments for precise alignment. A sturdy fence ensures straight cuts. The Unisaw models include long fences for tracking wide boards. Check for smooth movement and lock-down security. A reliable fence minimizes guesswork and improves cut quality, especially for repetitive production tasks or fine joinery.
Frequently asked questions
Which Delta saw is best for wide ripping?
The Delta 10-Inch Table Saw with 32.5-Inch Rip Capacity is the top choice for broad cuts. It features a 77-pound frame and a 15-amp motor. This model supports stacked dado cuts and offers a generous cutting range without requiring the footprint of a full cabinet saw. It balances capacity with manageable size for most workshops.
What is the most powerful Delta table saw available?
The Delta 5 HP Left Tilt Unisaw with 36-Inch Fence provides the highest power in this lineup. It weighs 644 pounds and requires 220-volt power. This industrial-grade unit is designed for stationary shops needing vibration control and heavy-duty performance for demanding production tasks. Its mass ensures stability during continuous use.
Does Delta make a portable miter saw for crosscuts?
Yes, the Delta Cruzer 10-Inch Dual Bevel Sliding Miter Saw is ideal for portable crosscuts. It weighs 60 pounds and delivers 16-inch crosscut capacity. The 15-amp motor supports wide board cutting and trim applications. Its dual-bevel feature allows for precise angled cuts without flipping the workpiece, making it efficient for detailed projects.
Which Delta saw handles intricate curve cutting?
The Delta 20-Inch Variable Speed Scroll Saw is designed for intricate curve cutting and detailed fretwork. It features a 20-inch throat and a tilting cast-iron table for precision. This tool fits detailed craft cuts rather than standard straight-line ripping. It is the correct choice when you need to navigate complex shapes in thin materials.
Is there a Delta saw with a digital angle gauge?
The Delta 10-Inch Table Saw with Digital Angle Gauge includes this feature for precise bevel alignment. It pairs a 15-amp cutting system with a 32.5-inch rip capacity. The magnetic measuring tool aids in accurate setup. Rack-and-pinion fence adjustments provide reliable positioning for workshop tasks that require exact angular measurements.
What is the heaviest Delta saw in this list?
The Delta 10-Inch Unisaw with 52-Inch Fence is the heaviest unit at 674 pounds. It features a 3-horsepower motor and a wide extension table for large-panel ripping. This cabinet-grade saw is built for dedicated production workshops. Its substantial weight ensures minimal vibration during heavy, stationary cutting operations.
Can I use a Delta saw for 220-volt production work?
Yes, several Delta models are built for 220-volt production work. The 5 HP Unisaw and the 3 HP Unisaws with 36-inch and 52-inch fences all require 220-volt power. These heavy-duty units offer robust cabinet-grade performance and precise bevel calibration. They are suited for continuous use in shops already wired for higher voltage.