The Best Makita Table Saws in 2026: 15 Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
If you are searching for the best makita table saws and portable cutting tools, you should evaluate each tool by its mechanical capabilities. Makita produces cutting tools ranging from 3-3/8-inch to 10-1/4-inch blade sizes, top-handle and barrel-grip jigsaws, plunge models with guide rails, and circular saws equipped with twin LED lights.
The Makita 6.5-Amp Top Handle Corded Jig Saw takes the top spot for continuous corded cutting with orbital control. We compared 15 products using the specifications published on each listing so you can find the right match for your workshop.
Quick picks
Our 15 picks
Makita 6.5-Amp Top Handle Corded Jig Saw
Best for: continuous corded cutting with orbital control
- Amperage
- 6.5 Amp
- Voltage
- 120V
- Power Source
- Corded
- Dimensions
- 9.25 × 3.86 × 7.8 inches
This corded tool pairs a 6.5 Amp 120V motor with a variable speed dial delivering 500 to 3,100 SPM. You get three orbital settings alongside straight cutting, a tool-less blade change mechanism, and a die-cast aluminum base. Weighing 5.3 pounds with a through-the-body dust port, it suits you if you need controlled cutting with continuous corded power and vacuum extraction.
Pros
- 6.5 Amp motor with 500 to 3,100 SPM variable speed dial
- Three orbital settings plus straight cutting capability
- Tool-less blade change system
- Die-cast aluminum base and 5.3-pound weight
Cons
- Tethered 120V corded operation limits work area mobility
- Renewed product rather than factory-new unit
Good fit if
- You need variable cutting speeds between 500 and 3,100 SPM.
- You require three orbital settings along with straight cutting.
- You want continuous corded power without managing batteries.
Skip if
- You require a cordless battery platform for jobsite mobility.
- You want factory-new equipment rather than a renewed unit.
Verdict: Makita Top Handle Corded Jig Saw delivers dependable 6.5 Amp corded power with versatile orbital settings. Its low-profile design and counterbalance system maintain cutting control across continuous workshop tasks.
Makita 18V X2 Brushless 7-1/4-Inch Rear Handle Saw
Best for: cordless cutting of thick framing lumber
- Blade Diameter
- 7-1/4"
- No-Load Speed
- 5,100 RPM
- Cutting Depth 90
- 2-9/16”
- Voltage
- 36V (18V X2)
- Dimensions
- 18.8 × 8.9 × 12 inches
- Weight
- 12.1 pounds
View on Amazon: Makita 18V X2 Brushless 7-1/4-Inch Rear Handle Saw
This tool is a cordless 7-1/4-inch rear-handle saw powered by two 18V LXT batteries to deliver 36V. Its brushless motor runs up to 5,100 RPM, offering a 2-9/16-inch cutting depth at 90 degrees to clear 3X material in one pass. It suits you if you need portable cutting capacity, bevel cuts up to 53 degrees, and an electric brake without managing a power cord.
Pros
- 2-9/16-inch cutting depth at 90 degrees cuts 3X material in one pass
- 36V power from two 18V LXT batteries with a 5,100 RPM brushless motor
- 0° to 53° bevel capacity with positive stops at 22.5°, 45°, and 53°
- Electric brake for productivity
Cons
- Batteries and charger are not included
- Weighs 12.1 pounds without batteries attached
Good fit if
- You need to cut 3X material in a single pass.
- You already own compatible Makita 18V LXT batteries.
- You require bevel capacity up to 53 degrees.
Skip if
- You prefer a corded saw that runs without charging batteries.
- You want a lightweight tool under 12 pounds.
Verdict: Makita 7-1/4-Inch Rear Handle Cordless Circular Saw delivers 36V power and a deep 2-9/16-inch cutting capacity without a cord. It gives you 5,100 RPM and bevel versatility up to 53 degrees.
Makita 6-1/2-Inch Plunge Saw with Guide Rail
Best for: guided sheet breakdown with variable speed
- Blade Diameter
- 6-1/2-Inch
- Dimensions
- 59 × 12 × 14 inches
- Weight
- 16.5 pounds
View on Amazon: Makita 6-1/2-Inch Plunge Saw with Guide Rail
This corded plunge circular saw includes a 55-inch guide rail and a stackable tool case. It runs on a 12-amp motor with a variable-speed dial reaching 2,000 to 5,200 RPM. You get a cutting depth of 2-3/16 inches at 90 degrees and bevel settings from -1 to 48 degrees. It suits woodworkers needing straight sheet cuts with dedicated track guidance.
Pros
- Includes a 55-inch guide rail and stackable tool case
- Variable speed control dial from 2,000 to 5,200 RPM
- Bevel range from -1 to 48 degrees with positive stops at 22.5 and 45 degrees
- Electronic speed control maintains motor speed under load
Cons
- Requires a corded power connection
- Maximum cutting depth is limited to 2-3/16 inches at 90 degrees
- Tool weight is 16.5 pounds
Good fit if
- You need a guided track system for straight cuts.
- You want adjustable blade speeds between 2,000 and 5,200 RPM.
- You work near standard electrical outlets.
Skip if
- You need cordless battery portability on the jobsite.
- You require cutting depths deeper than 2-3/16 inches.
Verdict: Makita 6-1/2-Inch Plunge Saw with Guide Rail provides guided track cutting powered by a 12-amp variable-speed motor. It delivers clean bevel and rip cuts without requiring a stationary workshop setup.
Makita 18V Brushless 6-1/2-Inch Cordless Circular Saw
Best for: portable cuts on the 18V platform
- Blade Diameter
- 6-1/2"
- No-Load Speed
- 5,000 RPM
- Voltage
- 18V
- Power Source
- Cordless
- Dimensions
- 14 × 7.8 × 10.4 inches
- Weight
- 7 pounds
View on Amazon: Makita 18V Brushless 6-1/2-Inch Cordless Circular Saw
This cordless circular saw runs on Makita’s 18V platform and turns a 6-1/2-inch blade at up to 5,000 RPM. At 7 pounds, it gives you a compact footprint measuring 14 inches long. The brushless motor automatically adjusts speed and torque as load changes. You will find it suits fast ripping and crosscutting tasks where you need cordless mobility instead of a benchtop setup.
Pros
- Delivers up to 5,000 RPM no-load speed
- Brushless motor matches torque and speed to workload
- Lightweight build at 7 pounds
- Compact 14-inch total tool length
Cons
- Sold as a bare tool without battery or charger
- Uses a 6-1/2-inch blade instead of standard 7-1/4-inch diameter
Good fit if
- You already own compatible Makita 18V batteries
- You need a lightweight 7-pound saw for portable cuts
- You cut stock where automatic torque adjustment prevents bogging down
Skip if
- You need a stationary table saw with a dedicated rip fence
- You prefer larger 7-1/4-inch blade cut capacities
Verdict: Makita 18V Brushless 6-1/2-Inch Cordless Saw delivers 5,000 RPM in a 7-pound handheld frame. It handles mobile cuts reliably if you already use 18V system batteries.
Makita 7-1/4-Inch Corded Circular Saw with LED Lights
Best for: corded jobsite cuts requiring built-in illumination
- Blade Diameter
- 7-1/4"
- Amperage
- 15 AMP
- No-Load Speed
- 5,800 RPM
- Cutting Depth 90
- 2-3/8"
- Dimensions
- 14 × 10 × 11 inches
- Weight
- 13.6 pounds
View on Amazon: Makita 7-1/4-Inch Corded Circular Saw with LED Lights
This corded circular saw runs a 15-amp motor reaching up to 5,800 RPM with a 7-1/4-inch blade. You get a cutting depth of 2-3/8 inches at 90 degrees and 1-3/4 inches at 45 degrees. Two built-in LED lights illuminate your cut line, and an AC/DC switch permits alternative power sources. It suits you if you need dependable corded cutting power.
Pros
- 15 AMP motor delivering up to 5,800 RPM
- Two built-in LED lights for cut-line illumination
- Cutting capacity of 2-3/8 inches at 90 degrees and 1-3/4 inches at 45 degrees
- AC/DC switch allows connection to alternative power sources
- Shaft lock enables quick blade replacement
Cons
- Weighs 13.6 pounds
- Requires continuous corded electrical connection
- Cutting depth limited to 2-3/8 inches at 90 degrees
Good fit if
- You need a 15 AMP motor running at 5,800 RPM.
- You want twin built-in LED lights to track cutting lines.
- You make straight cuts up to 2-3/8 inches deep or bevels up to 1-3/4 inches.
Skip if
- You prefer a cordless battery-powered tool platform.
- You need a saw weighing under 13.6 pounds.
- You require cutting depths exceeding 2-3/8 inches.
Verdict: Makita 7-1/4-Inch Corded Circular Saw with LED Lights delivers 5,800 RPM through a 15 AMP motor and twin cut-line lights for straight and bevel cuts. Its 13.6-pound build and AC/DC compatibility provide steady corded utility.
Makita 7-1/4-Inch Magnesium Circular Saw
Best for: high-speed cuts requiring wide bevel capacity
- Blade Diameter
- 7-1/4"
- Amperage
- 15.0 A
- No-Load Speed
- 5,800 RPM
- Cutting Depth 90
- 2 to 1/2 inches
- Dimensions
- 20.9 × 17.9 × 13.9 inches
- Weight
- 10.6 pounds
This circular saw features a 15.0-amp motor and a 7-1/4-inch blade diameter. It delivers 5,800 RPM and weighs 10.6 pounds using magnesium components. You get a cutting depth of 2-1/2 inches at 90 degrees along with bevel angles up to 56 degrees. Two built-in LED lights illuminate the cut line. It suits you if you require high-speed motor performance and lightweight handling for jobsite cuts.
Pros
- 15.0-amp motor with 5,800 RPM output
- Magnesium components keep total weight to 10.6 pounds
- Bevel range up to 56 degrees with positive stops at 22.5 and 45 degrees
- Two built-in LED lights illuminate the line of cut
- 2-1/2-inch cutting capacity at 90 degrees
Cons
- No variable speed control listed
- One-year warranty period
Good fit if
- You need 2-1/2 inches of cutting depth at 90 degrees.
- You want bevel angles up to 56 degrees with preset stops at 22.5 and 45 degrees.
- You work in low light and need dual LED illumination along your cut line.
Skip if
- You require operating speeds below 5,800 RPM.
- You want a tool warranty longer than one year.
Verdict: Makita 7-1/4-Inch Magnesium Circular Saw delivers 5,800 RPM and 2-1/2 inches of cut depth at 10.6 pounds. Its 56-degree bevel capacity and twin LEDs support accurate jobsite cutting.
Makita 18V LXT Brushless Cordless Jig Saw
Best for: portable cordless curved and straight cutting
- Voltage
- 18V
- Power Source
- Cordless
- Dimensions
- 17.7 × 5.31 × 14.4 inches
This cordless cutting tool runs on Makita 18V batteries and features a brushless motor delivering 0 to 3,000 strokes per minute. You get three orbital settings plus straight cutting to adapt to various materials. The unit includes a soft no-load mode, a built-in L.E.D. light, and a two-finger variable-speed trigger with a lock-on button. It suits you if you need portable curved or straight cuts without cords.
Pros
- Brushless motor delivers 0 to 3,000 strokes per minute
- Three orbital settings plus straight cutting
- Soft no-load mode slows starting speed for accurate cut starts
- Built-in L.E.D. light illuminates the cut line
Cons
- Tool-only configuration includes no battery or charger
- No storage case or blades listed in specifications
Good fit if
- You already own compatible Makita 18V batteries and chargers.
- You need portable orbital cutting with up to 3,000 strokes per minute.
Skip if
- You need a stationary table saw for wide sheet ripping.
- You do not already own Makita 18V power system batteries.
Verdict: Makita 18V Cordless Brushless Jig Saw provides flexible orbital settings and up to 3,000 strokes per minute for handheld work. It functions as a portable cutting tool rather than a traditional stationary table saw.
Makita 10-1/4-Inch Corded Circular Saw
Best for: single-pass cuts through 4x lumber and beams
- Blade Diameter
- 10-1/4"
- Amperage
- 15 amp
- No-Load Speed
- 4, 300 RPM
- Cutting Depth 90
- 3-13/16"
- Dimensions
- 12.6 × 18.7 × 14.6 inches
- Weight
- 15.2 pounds
This corded circular saw features a large 10-1/4-inch blade and a 15 amp motor running at 4,300 RPM. You get a cutting depth of 3-13/16 inches at 90 degrees, allowing you to cut four-by lumber in a single pass. At 15.2 pounds with auxiliary front and top handles, it suits you if you need to cut thick beams, engineered lumber, and heavy timber.
Pros
- Cuts 4x lumber in a single pass with 3-13/16-inch depth at 90 degrees
- 15 amp motor produces 4,300 RPM for dense timber and beams
- Auxiliary front and top handles provide two-handed guidance
- Cuts up to 2-11/16 inches deep at a 45-degree bevel
Cons
- Tool weight is relatively heavy at 15.2 pounds
- Large footprint measuring 18.7 inches wide and 14.6 inches high
Good fit if
- You need to cut through 4x lumber in a single pass.
- You regularly cut thick engineered lumber, beams, and timber.
- You require a deep 3-13/16-inch cutting depth at 90 degrees.
Skip if
- You want a saw that weighs less than 15.2 pounds.
- You only make shallow cuts in standard thin boards.
Verdict: Makita 10-1/4-Inch Corded Circular Saw provides the 3-13/16-inch cutting depth and 15 amp motor necessary to slice through 4x lumber in one pass. Its 15.2-pound weight and large frame suit heavy timber and beam work rather than light cutting tasks.
Makita 18V LXT Cordless Jig Saw
Best for: Makita 18V battery owners needing curved cuts
- Voltage
- 18V
- Power Source
- Cordless
- Dimensions
- 12.3 × 3.6 × 9.1 inches
- Weight
- 6 pounds
This Makita 18V LXT Cordless Jig Saw provides portable cutting without a cord. It features a variable speed motor running up to 2,600 strokes per minute, controlled by a two-finger trigger. You get three orbital settings plus straight cutting to match your material. Tool-less blade changes speed up swaps, while the base measures across a 6-pound frame. It suits you if you already use Makita 18V batteries and need curved cutting.
Pros
- Variable speed motor delivers 0 to 2,600 strokes per minute
- Three orbital settings plus straight cutting mode
- Tool-less blade change lever
- Heavy-gauge precision-machined base
Cons
- Sold as tool only with no battery or charger included
- Weighs 6 pounds without a battery attached
Good fit if
- You already own Makita 18V LXT batteries and chargers.
- You need orbital settings for switching between curved and straight cuts.
Skip if
- You need a battery and charger included in the box.
- You require a corded tool for continuous workshop power.
Verdict: Makita 18V LXT Cordless Jig Saw offers cordless flexibility with 0 to 2,600 strokes per minute and four total cut settings. It works well if you already have compatible 18V power packs.
Makita 6-1/2-Inch Cordless Plunge Circular Saw
Best for: cordless plunge cuts and sheet breakdown
- Blade Diameter
- 6-1/2 inch
- Voltage
- 36V
- Power Source
- Cordless
- Dimensions
- 16 × 12.1 × 19.6 inches
- Weight
- 27.6 pounds
View on Amazon: Makita 6-1/2-Inch Cordless Plunge Circular Saw
This Makita 6-1/2-inch cordless plunge circular saw operates on two 18V batteries to deliver 36V power. Its brushless motor provides variable speeds between 2,500 and 6,300 RPM, while automatic speed adjustment manages torque during cuts. You can make cuts as close as 11/16 inch to a wall. It suits you if you need a portable plunge-cutting setup instead of a stationary table saw.
Pros
- Dual 18V battery system delivering 36V power
- Variable speed dial ranging from 2,500 to 6,300 RPM
- Close to the wall cutting down to 11/16 inch
- Brushless motor with automatic torque adjustments
Cons
- Kit package weight is 27.6 pounds
- Requires two charged 18V batteries to operate
Good fit if
- You need plunge-cutting capability with adjustable RPM settings.
- You want cordless 36V power using standard 18V battery packs.
- You require close trimming cuts next to existing walls.
Skip if
- You need a stationary table saw with a fixed rip fence.
- You prefer continuous power from a standard electrical cord.
Verdict: Makita 6-1/2-Inch Cordless Plunge Circular Saw delivers 36V cordless power with a variable-speed brushless motor for precise sheet sizing. It provides straight plunge cuts and close-wall reach without requiring a dedicated power outlet.
Makita 18V Cordless Barrel Grip Jig Saw
Best for: controlled cuts using existing 18V LXT batteries
- Voltage
- 18V
- Power Source
- Cordless
- Length
- 10.3 inches
This cordless jig saw runs on Makita 18V LXT batteries and features a compact 10.3-inch barrel grip body. Its brushless motor provides variable speeds between 800 and 3,000 strokes per minute via a 5-speed dial. You get three orbital settings alongside straight cutting for material versatility. It suits you if you need low-profile maneuverability for detailed cuts across wood and composite boards.
Pros
- Variable speed dial offers 800 to 3,000 strokes per minute across 5 settings
- Brushless motor cuts up to 135 feet of 1-inch MDF per 5.0Ah charge
- Offers 3 orbital settings plus straight cutting
- Compact 10.3-inch barrel grip design
Cons
- Battery and charger are not included
- Requires existing 18V LXT batteries to operate
Good fit if
- You already own compatible Makita 18V LXT platform batteries.
- You prefer a barrel grip body over a top-handle configuration.
- You need selectable orbital modes for variable cutting efficiency.
Skip if
- You need a complete kit with a bundled battery and charger.
- You require a corded tool for continuous workshop power.
Verdict: Makita 18V LXT Barrel Grip Jig Saw delivers adjustable speeds from 800 to 3,000 strokes per minute and four cut settings in a compact frame. It provides precise cutting control for users already invested in Makita cordless batteries.
Makita 18V Sub-Compact 6-1/2-Inch Circular Saw
Best for: portable cordless cutting on 18V batteries
- Blade Diameter
- 6-1/2”
- No-Load Speed
- 5, 000 RPM
- Cutting Depth 90
- 2-1/4”
- Voltage
- 18V
- Power Source
- Cordless
- Dimensions
- 9 × 13.5 × 9 inches
View on Amazon: Makita 18V Sub-Compact 6-1/2-Inch Circular Saw
This cordless circular saw runs on an 18V battery platform and features a brushless motor delivering 5,000 RPM. You get a 6-1/2-inch blade with a maximum cutting depth of 2-1/4 inches at 90 degrees and a 0 to 50-degree bevel range. It weighs 6.4 pounds with an attached 2.0Ah battery. It suits you if you need a compact, portable cutting tool for ripping and crosscutting without power cords.
Pros
- Brushless motor delivers up to 5,000 RPM
- Cutting capacity reaches 2-1/4 inches at 90 degrees
- Bevel capacity spans from 0 to 50 degrees
- Includes dust extracting attachment and 24T carbide-tipped blade
Cons
- Battery and charger not included
- Smaller 6-1/2-inch blade diameter compared to standard 7-1/4-inch saws
Good fit if
- You already own compatible Makita 18V batteries and a charger.
- You need a compact circular saw under 11 inches long for easier handling.
- You require bevel cuts up to 50 degrees.
Skip if
- You need a complete kit with a battery and charger included.
- You require the greater cut depth of a 7-1/4-inch saw.
Verdict: Makita 18V Cordless 6-1/2-Inch Circular Saw delivers portable 5,000 RPM cutting power in a lightweight package. It gives you solid cutting capacity and bevel adjustability if you already use Makita 18V batteries.
Makita 7-1/4-Inch Magnesium Hypoid Saw
Best for: deep bevel cuts and heavy-duty framing
- Blade Diameter
- 7-1/4"
- Cutting Depth 90
- 2-3/8"
- Dimensions
- 21.8 × 11.8 × 12.5 inches
- Weight
- 13.2 pounds
This handheld hypoid saw gives you a 7-1/4-inch blade diameter paired with heat-treated hypoid steel gears. It delivers a cutting depth of 2-3/8 inches at 90 degrees and features positive bevel stops at 22.5, 45, and 51.5 degrees. Built with magnesium components, the tool weighs 13.2 pounds. It suits you if you need a durable, oil-bath gear system for heavy framing cuts and demanding angled slicing tasks.
Pros
- 2-3/8-inch cutting depth at 90 degrees
- Positive bevel stops at 22.5, 45, and 51.5 degrees
- Heat-treated hypoid steel gears with sealed oil bath housing
- Magnesium components keeping total weight at 13.2 pounds
Cons
- Weighs 13.2 pounds, heavier than standard circular saws
- No carrying case or storage bag listed
Good fit if
- You need a 2-3/8-inch cutting depth at 90 degrees.
- You make frequent bevel cuts at 22.5, 45, or 51.5 degrees.
- You want sealed hypoid steel gears that use oil bath technology.
Skip if
- You want a lightweight cutting tool under 13 pounds.
- You require an included carrying case for transport.
Verdict: Makita 7-1/4-Inch Magnesium Hypoid Saw delivers a 2-3/8-inch cutting capacity and durable steel gears in a 13.2-pound magnesium frame. It gives you dependable power with dedicated positive stops up to 51.5 degrees.
Makita 10" Slide Compound Miter Saw
Best for: Portable sliding miter work up to 12 inches
- Blade Diameter
- 10"
- Amperage
- 13.0 A
- No-Load Speed
- 4,500 RPM
- Dimensions
- 22.4 × 31.5 × 17.1 inches
- Weight
- 36.2 pounds
This Makita 10-inch slide compound miter saw features a 13.0-amp direct drive motor running at 4,500 RPM. It cuts up to 12 inches at 90 degrees and 8-1/2 inches at 45 degrees. The unit weighs 36.2 pounds, making it compact for job site portability. You get accurate cuts via a linear ball bearing system and an LED light. It is suitable for users needing reliable sliding miter capabilities.
Pros
- 13.0-amp direct drive motor delivers 4,500 RPM
- Cuts up to 12 inches at 90 degrees
- Linear ball bearing system for accurate cuts
- Built-in LED light illuminates the cut line
- Compact and lightweight at 36.2 pounds
Cons
- 10-inch blade limits rip capacity compared to 12-inch models
- No bevel capacity to the right
- Corded power requires an outlet
Good fit if
- You need a portable sliding miter saw for job sites
- You require precise cuts with a linear ball bearing system
- You work with materials up to 12 inches wide
Skip if
- You need a 12-inch blade for wider rip cuts
- You require beveling to the right side
- You need a cordless tool for remote locations
Verdict: Makita 10" Slide Compound Miter Saw offers a compact, powerful solution for users who prioritize portability and accuracy in a sliding miter saw. It fits those who need 12-inch rip capacity without the bulk of larger models.
Makita 18V Brushless Cordless Jig Saw
Best for: cordless curved cuts on an 18V platform
- Voltage
- 18V
- Power Source
- Cordless
- Dimensions
- 17.7 × 5.31 × 14.4 inches
This renewed Makita cordless jig saw runs on an 18V battery platform and features a brushless motor delivering 0 to 3,000 strokes per minute. You get three orbital settings alongside straight cutting, an integrated LED light, and a soft no-load function that ramps up blade speed during entry. It suits you if you need portable curved cutting with controlled starts and variable trigger operation.
Pros
- Brushless motor delivers 0 to 3,000 strokes per minute
- Three orbital settings plus straight cutting
- Soft no-load mode stabilizes cut starts
- Built-in LED work light
- Variable speed trigger includes lock-on button
Cons
- Sold as tool only without battery or charger
- Renewed condition rather than brand-new
Good fit if
- You already own compatible 18V batteries and chargers.
- You need orbital cutting settings alongside straight cutting.
- You want a soft no-load mode for controlled cut engagement.
Skip if
- You need a bundled battery and charger included in the box.
- You require a factory-new tool rather than a renewed unit.
Verdict: Makita 18V Cordless Brushless Jig Saw provides up to 3,000 strokes per minute with three orbital settings and soft no-load control. It is a solid choice for woodworkers who already use 18V batteries.
Specifications side by side
| Spec | Makita 6.5-Amp Top Handle Corded Jig Saw | Makita 18V X2 Brushless 7-1/4-Inch Rear Handle Saw | Makita 6-1/2-Inch Plunge Saw with Guide Rail | Makita 18V Brushless 6-1/2-Inch Cordless Circular Saw | Makita 7-1/4-Inch Corded Circular Saw with LED Lights | Makita 7-1/4-Inch Magnesium Circular Saw | Makita 18V LXT Brushless Cordless Jig Saw | Makita 10-1/4-Inch Corded Circular Saw | Makita 18V LXT Cordless Jig Saw | Makita 6-1/2-Inch Cordless Plunge Circular Saw | Makita 18V Cordless Barrel Grip Jig Saw | Makita 18V Sub-Compact 6-1/2-Inch Circular Saw | Makita 7-1/4-Inch Magnesium Hypoid Saw | Makita 10" Slide Compound Miter Saw | Makita 18V Brushless Cordless Jig Saw |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Diameter | not specified | 7-1/4" | not specified | 6-1/2" | 7-1/4" | 7-1/4" | not specified | 10-1/4" | not specified | 6-1/2 inch | not specified | 6-1/2” | 7-1/4" | 10" | not specified |
| Amperage | 6.5 Amp | not specified | not specified | not specified | 15 AMP | 15.0 A | not specified | 15 amp | not specified | not specified | not specified | not specified | not specified | 13.0 A | not specified |
| No-Load Speed | not specified | 5,100 RPM | not specified | 5,000 RPM | 5,800 RPM | 5,800 RPM | not specified | 4, 300 RPM | not specified | not specified | not specified | 5, 000 RPM | not specified | 4,500 RPM | not specified |
| Cutting Depth 90 | not specified | 2-9/16” | not specified | not specified | 2-3/8" | 2 to 1/2 inches | not specified | 3-13/16" | not specified | not specified | not specified | 2-1/4” | 2-3/8" | not specified | not specified |
| Voltage | 120V | 36V (18V X2) | not specified | 18V | not specified | not specified | 18V | not specified | 18V | 36V | 18V | 18V | not specified | not specified | 18V |
| Power Source | Corded | not specified | not specified | Cordless | not specified | not specified | Cordless | not specified | Cordless | Cordless | Cordless | Cordless | not specified | not specified | Cordless |
| Dimensions | 9.25 × 3.86 × 7.8 inches | 18.8 × 8.9 × 12 inches | 59 × 12 × 14 inches | 14 × 7.8 × 10.4 inches | 14 × 10 × 11 inches | 20.9 × 17.9 × 13.9 inches | 17.7 × 5.31 × 14.4 inches | 12.6 × 18.7 × 14.6 inches | 12.3 × 3.6 × 9.1 inches | 16 × 12.1 × 19.6 inches | not specified | 9 × 13.5 × 9 inches | 21.8 × 11.8 × 12.5 inches | 22.4 × 31.5 × 17.1 inches | 17.7 × 5.31 × 14.4 inches |
| Weight | not specified | 12.1 pounds | 16.5 pounds | 7 pounds | 13.6 pounds | 10.6 pounds | not specified | 15.2 pounds | 6 pounds | 27.6 pounds | not specified | 4 pounds | 13.2 pounds | 36.2 pounds | not specified |
| Length | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 10.3 inches | not specified | not specified | not specified | not specified |
| Color | White | Teal | Teal | Teal | Factory | Teal | Blue | Blue | Greenish Blue | Multicolor | Teal | Multicolor | Teal | Teal | Blue |
| Model | JV0600K-R | XSR01Z | SP6000J1 | XSH03Z | 5007F | 5007MG | XVJ04Z | HS0600 | XVJ03Z | XPS01PTJ | XVJ05Z | XSH04ZB | 5377MG | LS1110F | not specified |
| Size | not specified | No Size | One Size | 0.625 in | One Size | Medium | 18V | 270 mm | One Size | 6.5 in | not specified | 1 Count (Pack of 1) | One Size | not specified | not specified |
Comparing the Makita Saw Lineup
You can group the lineup by motor amperage and blade diameter. Corded tools like the Makita 10-1/4-Inch Corded Circular Saw and the Makita 7-1/4-Inch Corded Circular Saw with LED Lights use 15-amp motors reaching up to 5,800 RPM. These models suit you if you cut thick lumber or require continuous jobsite output.
Smaller saws prioritize maneuverability across cordless 18V platforms and corded 120V setups. The Makita 18V Brushless 6-1/2-Inch Cordless Circular Saw runs at 5,000 RPM for quick mobile cuts. For curved work, the Makita 6.5-Amp Top Handle Corded Jig Saw provides orbital cutting control. These suit you when working away from stationary benches.
Where the Makita Range Fits
Makita suits you if you need handheld cutting flexibility across workshops and jobsites. The lineup spreads from a 3.5-pound, 3-3/8-inch cordless saw up to a 10-1/4-inch corded timber saw. You can select between top-handle and barrel-grip jigsaws, or choose rear-handle, hypoid, and plunge track bodies. Built-in twin LED lights appear on specific 7-1/4-inch corded frames for illuminated cutlines.
The primary gap is the absence of stationary table saws. The range lacks benchtop rip tables, 8-1/4-inch blades, and battery power for saws larger than 7-1/4 inches. You must rely on handheld tools instead of fixed cabinetry machinery.
For workshop dust extraction between cuts, you can compare CFM specs for the best makita cordless vacuums.
How to Choose the Right Makita Saw
-
Assess Cutting Depth Needs
You must evaluate maximum cutting depth to match your stock thickness. Compact blades deliver shallow cuts, such as 1 inch for thin paneling. Standard framing requires more clearance for dimensional lumber. The Makita 10-1/4-Inch Corded Circular Saw provides a 3-13/16-inch depth of cut to clear 4x lumber in one stroke. If you cut thick posts or beams, prioritize larger blades with deep cut ratings. For sheet goods and trim, smaller diameters give you plenty of clearance without unnecessary bulk.
-
Check Maximum Bevel Capacity
You should examine the maximum bevel range and positive stops before making compound cuts. Basic models tilt up to 45 degrees for standard mitered edges. Advanced models tilt past 50 degrees to give you extra clearance for valley rafters or specialized joinery. The Makita 7-1/4-Inch Magnesium Circular Saw offers a bevel capacity of up to 56 degrees for wide-angle cuts. If your work involves standard square cuts, a 45-degree bevel suffices. Choose wider bevel ranges when your projects demand compound framing angles.
-
Compare Stroke Rate Controls
You need to check strokes per minute and orbital settings when choosing a jig saw. Higher speeds up to 3,000 SPM clear material quickly, while lower rates provide precision on intricate curved profiles. Orbital settings alter the blade motion from straight vertical travel to an aggressive forward stroke. The Makita 18V Cordless Barrel Grip Jig Saw offers adjustable speeds between 800 and 3,000 SPM with four cut settings. Pick variable-speed models if you switch between delicate curves and fast, straight rough cuts.
-
Factor In Tool Weight
You should verify bare tool weight to manage arm fatigue and overhead control. Lightweight models allow you to cut panels with one hand and stay agile on ladders. The Makita 12V Max 3-3/8-Inch Cordless Circular Saw weighs only 3.5 pounds for overhead reach and easy portability. Heavier saws weighing over 12 pounds add physical stability on flat cuts but require two hands for steady guidance. Select a sub-5-pound frame for mobile tasks, or choose heavier builds for workbench stability.
-
Evaluate Voltage and Power Source
You should review the power source to match your workplace setup. Corded 120V motors deliver continuous operation without downtime for battery recharging. Cordless models rely on 18V batteries to give you unrestricted mobility on jobsites without extension cords. The Makita 18V X2 Brushless 7-1/4-Inch Rear Handle Saw uses two 18V batteries to produce 36V power for heavy framing lumber. Choose corded power if your work stays stationary near an outlet. Select cordless models if you already operate compatible battery platforms across your tools.
-
Review Rotational Blade Speed
You must look at motor RPM to understand cutting speed through varied grain. Circular saws running between 5,000 and 5,800 RPM deliver cleaner edges and faster rip cuts through standard boards. The Makita 18V Sub-Compact 6-1/2-Inch Circular Saw delivers 5,000 RPM in a compact 4-pound body. Lower speeds or lack of speed adjustment can cause blade bogging in dense materials. Check the RPM rating alongside blade diameter to ensure the tool maintains sufficient rotational momentum under continuous cutting load.
Frequently asked questions
Does this Makita lineup include stationary table saws?
No, this 2026 selection focuses on handheld circular saws, plunge track saws, and jigsaws rather than stationary benchtop table saws. These portable tools handle jobsite rips, crosscuts, and sheet breakdowns where moving a dedicated table saw is impractical. You get cutting capacities tailored for mobile woodworking without needing a heavy stationary tool base.
How does a plunge track saw compare to a table saw for sheet breakdown?
A plunge track saw lets you bring the blade directly to large sheet goods instead of wrestling heavy panels across a stationary saw table. The Makita SP6000J1 uses a 59-inch guide rail and a 12-amp variable-speed motor to make long straight rips. This setup delivers controlled, clean bevel and plunge cuts without requiring wide infeed and outfeed tables.
What maximum bevel angles can Makita circular saws reach?
Makita circular saws offer bevel capacities reaching past 45 degrees, depending on the specific model. The Makita 5007MG magnesium circular saw adjusts up to a 56-degree bevel, while the cordless XSR01Z rear handle saw reaches up to 53 degrees. For hypoid framing work, the 5377MG model includes dedicated positive stops up to 51.5 degrees for angled cuts.
Which Makita cordless saws deliver 36V cutting power without a cord?
Makita achieves 36V cordless performance by pairing two 18V batteries in tools like the XSR01Z rear handle circular saw. That model runs at 5,100 RPM and gives you a 2-9/16-inch cutting capacity. The XPS01PTJ cordless plunge circular saw also uses 36V brushless power to provide variable-speed plunge cuts and sheet sizing on jobsites without wall outlets.
How do stroke speeds compare across Makita cordless jigsaws?
Makita cordless jigsaws provide varied stroke speeds to match specific detailing work. The barrel-grip XVJ05Z features an adjustable speed dial ranging from 800 to 3,000 strokes per minute across four cut settings. In contrast, the XVJ03Z top-handle saw operates between 0 and 2,600 strokes per minute, while brushless models like the XVJ04Z reach top speeds of 3,000 strokes per minute.
Which Makita circular saw is the best option for lightweight portability?
The Makita SH02R1 12V Max circular saw is the lightest option at 3.5 pounds. It features a 3-3/8-inch blade diameter and makes bevel cuts up to 45 degrees. If you require standard 6-1/2-inch blades on an 18V platform, the sub-compact XSH04ZB weighs only 4 pounds while reaching 5,000 RPM, keeping tool fatigue low during long workdays.
What features help with cut-line visibility on Makita circular saws?
Several Makita circular saws incorporate twin LED lights directly into their frames to illuminate the cut line. The corded 5007F circular saw features built-in LED cut-line illumination alongside AC/DC power compatibility. Similarly, the 10.6-pound 5007MG magnesium circular saw includes twin LEDs to keep sightlines clear when you execute straight rips or bevel cuts on dark worksites.