6 Best Alternatives to the VEVOR Thickness Planer (2026)

How these alternatives compare

WEN 13-Inch Spiral Benchtop Thickness Planer

The WEN 13-Inch Spiral Benchtop Thickness Planer uses a helical cutterhead instead of the VEVOR’s two-blade setup. This design delivers a smoother finish with less tear-out, making it ideal for fine woodworking. It weighs 81 pounds, which is heavier than the VEVOR’s 54 pounds, offering more stability during operation. Both models share a 15-amp motor and 13-inch cutting width. You should choose this alternative if surface quality matters more than raw power or lower weight. The spiral head reduces noise and vibration, providing a cleaner cut on hardwoods without the chip marks common with straight knives.

WOODERS 13-Inch Two-Blade Benchtop Planer

The WOODERS 13-Inch Two-Blade Benchtop Planer matches the VEVOR’s 15-amp power and 13-inch capacity but weighs 60 pounds. This extra weight may provide better stability for dense hardwoods. It uses a two-blade cutterhead like the VEVOR, so you should expect similar chip marks and noise levels. The WOODER model is slightly more compact in length at 22.4 inches compared to the VEVOR’s 27.4 inches. It is a suitable choice if you need a budget-friendly option with comparable power. However, it does not offer the extended table support found on the VEVOR, so long stock may require additional support during planing.

WOODERS 13-Inch Helical Benchtop Planer

The WOODERS 13-Inch Helical Benchtop Planer features a spiral helical cutterhead for superior finish quality compared to the VEVOR’s two-blade system. It weighs 62 pounds and includes a 15-amp motor with a 13-inch cutting width. The helical head reduces tear-out and noise, making it better for fine furniture work. This model is heavier and more expensive than the VEVOR but delivers professional-grade results. You should pick this alternative if you prioritize a smooth surface over cost savings. It lacks the extended table support of the VEVOR, so you must manage long boards manually. The spiral design ensures consistent cuts across the full 13-inch width.

Bucktool 13-Inch 3-Blade Benchtop Planer

The Bucktool 13-Inch 3-Blade Benchtop Planer offers a three-blade cutterhead, which provides a smoother finish than the VEVOR’s two-blade design. It shares the 15-amp motor and 13-inch cutting width. The three-blade setup reduces chip marks and improves surface quality for hardwoods. This model includes automatic speed adjustment and a dust connector for better workflow. It is a practical choice for woodworkers who want better finish quality without moving to a full spiral head. The compact design suits benchtop use, though specific dimensions are not listed. You should consider this if you need a balance between power and finish quality, avoiding the noise of two-blade systems.

VEVOR 13-Inch Three-Blade Benchtop Planer

The VEVOR 13-Inch Three-Blade Benchtop Planer upgrades the original’s two-blade system to three blades for a smoother cut. It weighs 62.8 pounds, heavier than the two-blade version’s 54 pounds, adding stability. The model retains the 15-amp motor and 13-inch cutting width. It uses a single-speed drive, similar to the original. This alternative is best for users who want improved finish quality while staying within the VEVOR brand. It lacks the extended table support of the original two-blade model, so long stock support is reduced. You should choose this if you prioritize a finer surface finish over the extended table benefits of the original two-blade configuration.

CRAFTSMAN 12.25-Inch Two-Knife Benchtop Planer

The Craftsman 12.25-Inch Two-Knife Benchtop Planer has a narrower 12.25-inch cutting width compared to the VEVOR’s 13-inch capacity. It weighs 61.1 pounds and includes a 15-amp motor. The two-knife head is similar to the VEVOR’s design but on a smaller width. This model focuses on motor power and dust collection efficiency. It is suitable for woodworkers who work with narrower boards and prioritize robust construction. The narrower width may limit you when planing wider stock. You should pick this alternative if you rarely need the full 13-inch capacity and value a trusted brand name. It does not offer the extended table support of the VEVOR, requiring manual support for long pieces.

Quick picks

Our 7 picks

1 Best overall

VEVOR 13-Inch Two-Blade Benchtop Planer

Best for: wide boards and long stock support

Cutting Width

13 inch

Amperage

15 Amp

Max Stock Thickness

6 inch

Blade Count

Two-Knife

Cutterhead Speed

23500 rpm

Blade Diameter

12-Inch

View on Amazon: VEVOR 13-Inch Two-Blade Benchtop Planer Affiliate link

This VEVOR planer offers a 13-inch cutting width and a 15-amp motor running at 23,500 rpm. It features a 2000W motor and a two-knife cutterhead for consistent results. The 13-inch worktable extends to 35 inches total length for better support. You can plane boards up to 6 inches thick. The built-in 20A overload protector adds safety. This model weighs 54 pounds.

Pros

• 13-inch cutting width for wide boards
• 2000W motor with 23,500 rpm speed
• 35-inch extended worktable for long stock
• Built-in 20A overload protection

Cons

• Only two-blade cutterhead configuration
• Heavier at 54 pounds
• Single-speed operation

Good fit if

• You need a 13-inch cutting width
• You want extended support for long boards
• You prefer a two-blade cutterhead

Skip if

• You require a spiral helical cutterhead
• You need three or more blades
• You prefer a lighter unit under 50 pounds

Verdict: VEVOR 13" Two-Blade Benchtop Planer suits users who prioritize a wide 13-inch capacity and long-stock support over a multi-blade cutterhead.

2 Also great

WEN 13-Inch Spiral Benchtop Thickness Planer

Best for: smooth finish quality

Cutting Width

13 inches

Cutterhead Type

Spiral

Feed Speed

26 feet per minute

Amperage

15A

Max Stock Thickness

6 inches

Blade Count

26 blades

View on Amazon: WEN 13-Inch Spiral Benchtop Thickness Planer Affiliate link

The WEN PL1326 is a 13-inch benchtop thickness planer featuring a spiral cutterhead with 26 rotatable HSS blades. It delivers a smooth finish with minimal tear-out. The 15-amp motor runs at 10,000 RPM with a feed rate of 26 feet per minute. It planes boards up to 6 inches thick. An onboard gauge tracks cutting depth. This model suits users who prioritize surface quality over high-speed production.

Pros

• Spiral cutterhead with 26 staggered HSS blades
• Onboard material removal gauge for depth control
• 15-amp motor with 26 feet per minute feed rate
• Planes boards up to 6 inches thick

Cons

• Heavier build at 81 pounds
• Single-speed motor limits feed rate options
• Benchtop design requires stable mounting

Good fit if

• You want a clean finish with minimal tear-out
• You value precise depth control via the onboard gauge
• You work with boards up to 13 inches wide

Skip if

• You need variable feed speed for different wood types
• You prefer a lighter, portable tool under 50 pounds
• You require a cutterhead with more than 26 blades

Verdict: WEN PL1326 13-Inch Spiral Planer fits hobbyists who need high-quality surface finishes and precise depth tracking rather than rapid stock removal.

3 Best budget

WOODERS 13-Inch Two-Blade Benchtop Planer

Best for: Powerful planing of wide, dense hardwood boards

Cutting Width

13 in

Amperage

15A

Max Stock Thickness

6.3 in

Blade Count

2 blades

Cutterhead Speed

10,000 RPM

Dimensions

22.4 × 14.2 × 17.9 inches

View on Amazon: WOODERS 13-Inch Two-Blade Benchtop Planer Affiliate link

The WOODERS 13-Inch benchtop planer uses a 15-amp, 2000W all-copper motor to drive a dual-edge cutterhead at 10,000 RPM. It handles boards up to 13 inches wide and 6.3 inches thick. The design includes an overload protection system and an ergonomic depth adjustment crank. You get two extra HSS blades and a dust port for shop cleanup. It is built for heavy-duty use on dense hardwoods.

Pros

• 15-amp, 2000W all-copper motor delivers 10,000 RPM cutterhead speed
• 13-inch cutting width accommodates wide boards in a single pass
• Dual-edge cutterhead with optimized infeed/outfeed structure reduces snipe
• Includes two extra replacement HSS blades for quick swaps

Cons

• Only two blades in the cutterhead, compared to three or more on competitors
• Weighs 60 pounds, which is heavier than some benchtop alternatives
• Uses standard HSS blades instead of a spiral helical cutterhead

Good fit if

• You need a planer for dense hardwoods like oak or walnut
• You want a powerful motor that resists bogging down
• You prefer an ergonomic crank for depth adjustment

Skip if

• You require a spiral helical cutterhead for a quieter operation
• You need more than two blades for a finer finish
• You have limited bench space for a 60-pound unit

Verdict: The WOODERS 13-Inch 15A Planer fits woodworkers who need raw power and a wide 13-inch capacity for large projects, though you should expect a noisier cut with its two-blade setup.

4 Best premium

WOODERS 13-Inch Helical Benchtop Planer

Best for: smooth hardwood finishing and heavy-duty use

Cutting Width

13"

Cutterhead Type

Spiral helical

Amperage

15 A

Max Stock Thickness

6-1/4"

Cutterhead Speed

10,000 RPM

Dimensions

22.4 × 14.2 × 17.9 inches

View on Amazon: WOODERS 13-Inch Helical Benchtop Planer Affiliate link

The WOODERS 13-inch benchtop planer uses a spiral helical cutterhead with tungsten carbide inserts to reduce tear-out and noise. Its 15-amp, 2000-watt motor runs at 10,000 RPM for aggressive, smooth cuts. It handles material up to 6-1/4 inches thick with a 13-inch width capacity. Micro-adjustable controls help you achieve precise, repeatable results on hardwoods.

Pros

• Spiral helical cutterhead with tungsten carbide inserts for a smooth finish
• 15-amp, 2000-watt all-copper motor for heavy-duty performance
• 10,000 RPM cutterhead speed for efficient cutting
• Micro-adjustable precision controls for accurate depth settings

Cons

• Heavier build at 62 pounds compared to lighter benchtop models
• Larger footprint with a length of 22.4 inches
• Uses two knives per side on the spiral head, which may require more frequent rotation than single-knife designs

Good fit if

• You need a glass-smooth finish on hardwoods without extensive sanding
• You plan to run the machine continuously for heavy-duty loads
• You want to reduce noise and tear-out during planing

Skip if

• You have limited bench space and need a more compact unit
• You prefer a lighter tool for frequent portability
• You only work with softwoods and do not need high-speed spiral cutting

Verdict: WOODERS 13-Inch Spiral Helical Planer delivers professional-grade smoothness and power for serious woodworkers who prioritize finish quality and durability over compact size.

5 Also great

Bucktool 13-Inch 3-Blade Benchtop Planer

Best for: Woodworkers needing 13-inch width and 3-blade cutterhead

Cutting Width

13"

Feed Speed

24.6 FPM

Amperage

15A

Max Stock Thickness

6"

Blade Count

3

View on Amazon: Bucktool 13-Inch 3-Blade Benchtop Planer Affiliate link

The Bucktool 13-Inch Benchtop Thickness Planer features a 15A motor and a 3-blade cutterhead for smooth stock removal. It handles workpieces up to 13 inches wide and 6 inches thick, with a max cut depth of 1/8 inch per pass. The feed speed is 24.6 FPM. A low-noise motor adjusts speed automatically. This planer includes a dust extraction connector and a carrying handle. It suits woodworkers needing reliable benchtop performance with precise depth control.

Pros

• 13-inch cutting width for versatile board sizes
• 3-blade cutterhead ensures consistent cutting performance
• Low-noise motor with automatic speed adjustment
• Includes dust extraction connector for cleaner operation

Cons

• 6-inch maximum stock thickness limits large timber
• 1/8-inch max cut depth requires multiple passes
• Standard two-knife style cutterhead, not spiral helical

Good fit if

• You need a 13-inch width for wider boards
• You prefer a 3-blade cutterhead for smoother cuts
• You want automatic speed adjustment for quieter operation

Skip if

• You frequently plane stock thicker than 6 inches
• You require a spiral helical cutterhead for noise reduction
• You need a cutterhead with more than 3 blades

Verdict: Bucktool 13-Inch 3-Blade Benchtop Planer fits woodworkers who need a 13-inch width and a 3-blade cutterhead for consistent results. Its automatic speed adjustment and dust connector add practical value for benchtop use.

6 Also great

VEVOR 13-Inch Three-Blade Benchtop Planer

Best for: Hardwood planing with wide stock

Cutting Width

13 in

Max Stock Thickness

6 in

Blade Count

3 blades

Dimensions

28.2 × 13 × 6 inches

Weight

62.8 pounds

View on Amazon: VEVOR 13-Inch Three-Blade Benchtop Planer Affiliate link

This VEVOR benchtop thickness planer features a 13-inch cutting width and a 2000W motor. It uses a dual-roller feeding system and three HSS blades to handle hardwoods. The 1/8-inch depth control offers precision. It suits woodworkers needing a sturdy worktable for long boards. The 62.8-pound build ensures stability during operation.

Pros

• 13-inch cutting width for wide boards
• 2000W motor handles hardwoods easily
• Dual-roller system reduces vibration
• Compatible with 2-inch and 4-inch dust hoses

Cons

• Single-speed motor limits feed rate options
• 62.8 pounds is heavy for a benchtop unit
• 1/8-inch increments may lack fine-tuning precision

Good fit if

• You need to plane wide boards up to 13 inches
• You work with dense hardwoods like oak or maple
• You want a stable unit for long stock

Skip if

• You require variable speed feed control
• You need fine 1/32-inch depth adjustments
• You have limited bench space for a 62.8-pound tool

Verdict: VEVOR 13-Inch 3-Blade Planer delivers robust power for hardwoods. It fits users who prioritize stability and wide capacity over fine speed control.

7

CRAFTSMAN 12.25-Inch Two-Knife Benchtop Planer

Best for: hardwood removal on narrower boards

Cutting Width

12.25 in.

Amperage

15 A

Cutterhead Speed

8,000 RPM

Dimensions

23.5 × 17.5 × 15.4 inches

Weight

61.1 pounds

View on Amazon: CRAFTSMAN 12.25-Inch Two-Knife Benchtop Planer Affiliate link

The Craftsman CMEW320 is a 15-amp benchtop thickness planer with a 12.25-inch cutting width. It features a two-knife solid steel cutterhead driven by a Poly-V belt for efficient stock removal. The unit includes a vacuum port for dust collection and reversible high-carbon steel knives. It weighs 61.1 pounds and measures 17.5 by 23.5 inches. This model suits users who need reliable power for hardwoods and softwoods in a compact footprint.

Pros

• 15-amp motor handles hard and soft wood removal
• Poly-V cutterhead drive maximizes stock removal efficiency
• Reversible high-carbon steel knives extend cutting life
• Integrated vacuum port for dust collection

Cons

• 12.25-inch width is narrower than the 13-inch standard
• Two-knife cutterhead produces more visible tear-out than spiral heads
• Heavier at 61.1 pounds than lighter benchtop alternatives

Good fit if

• You work with boards under 12.25 inches wide
• You prefer a simple two-knife setup for easy maintenance
• You need a powerful 15-amp motor for dense hardwoods

Skip if

• You routinely plane boards wider than 12.25 inches
• You require a spiral helical cutterhead for ultra-smooth finishes
• You need a lighter unit for frequent transport

Verdict: Craftsman 12.25 In. Benchtop Planer fits woodworkers who prioritize motor power and dust collection over maximum cutting width or spiral head smoothness.

Specifications side by side

Frequently asked questions