1.75 HP or 5 HP Table Saws? Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This 175 hp vs 5 HP table saw comparison highlights a major power gap. Both tools are JET machines built for serious woodworking. The first is a band saw with 1.75 HP. The second is a table saw with 5 HP. You need to match the motor to your tasks. One handles thick resawing. The other delivers high-speed ripping power. Check the specs below to see which fits your shop.
Key differences
| Aspect | JET 14-Inch 1.75 HP Band Saw | Jet Deluxe XACTA 10-Inch 5 HP Table Saw |
|---|---|---|
| Horsepower | 1.75 HP | 5 HP |
| Rip Capacity | 13-Inch | 30-Inch |
| Blade Diameter | not listed | 10-Inch |
| Voltage | not listed | 230V |
Which one should you choose?
Choose JET 14-Inch 1.75 HP Band Saw if
- You need to resaw thick lumber up to 13 inches tall in a single pass.
- You want a machine with a ground cast-iron table that tilts for bevel cuts.
- You prefer a tool backed by a 5-year warranty and parts support.
Choose Jet Deluxe XACTA 10-Inch 5 HP Table Saw if
- You require a 30-inch rip capacity for wide panels.
- You need 5 HP of motor power for heavy-duty cutting.
- You are working with a 230V power supply in your shop.
Verdict: Choose the 1.75 HP band saw if your priority is resawing thick stock. Pick the 5 HP table saw if you need high-speed ripping and a large fence system. Each tool serves a distinct purpose in the workshop.
1.75 HP vs 5 HP Specs
Horsepower
The JET 14-Inch 1.75 HP Band Saw uses a 1.75 HP capacitor-run motor. This power level supports deep resawing up to 13 inches tall. It handles hardwoods and softwoods efficiently. The Jet Deluxe XACTA 10-Inch 5 HP Table Saw features a much larger 5 HP motor. This higher horsepower allows for continuous heavy-duty cutting in commercial settings. The 5 HP motor drives the 10-inch blade with significant torque. You get more cutting force for thick stock or dense materials. The difference in motor size is substantial and defines the machine's role.
Rip Capacity
The Jet Deluxe XACTA 10-Inch 5 HP Table Saw includes an exclusive 30-inch commercial XACTA fence. This provides a 30-inch rip capacity for wide panels. It is designed for large sheet goods and broad lumber. The JET 14-Inch 1.75 HP Band Saw does not list a rip capacity. It is a band saw designed for resawing and curved cuts. It has a 13-inch throat capacity for width. You cannot compare rip widths directly because the machines cut differently. The table saw offers superior lateral cutting range for wide boards.
Blade Diameter
The Jet Deluxe XACTA 10-Inch 5 HP Table Saw uses a 10-inch blade diameter. This is the standard size for most table saw operations. It balances speed and cutting depth effectively. The JET 14-Inch 1.75 HP Band Saw does not list a blade diameter. It uses 116-inch long band blades ranging from 1/8 inch to 3/4 inch wide. The blade type and size are completely different. You cannot directly compare the diameter because the cutting mechanisms differ. The table saw uses a circular blade for straight cuts.
Build
The Jet Deluxe XACTA 10-Inch 5 HP Table Saw weighs 330 pounds. It has a 36-inch width and 65-inch length. The table includes 11-inch left and right cast iron extension wings. This creates the largest table surface in its class. The JET 14-Inch 1.75 HP Band Saw weighs 272 pounds. It has a 27-inch width and 75.5-inch length. It features a ground cast-iron table that tilts 0–45 degrees. Both machines use cast iron for stability. The table saw is wider and heavier, offering more support surface.
Voltage
The Jet Deluxe XACTA 10-Inch 5 HP Table Saw requires 230V power. This higher voltage supports the 5 HP motor for commercial use. It ensures consistent power delivery under load. The JET 14-Inch 1.75 HP Band Saw does not list its voltage requirement. It likely uses standard 120V or 230V, but the data is missing. You must check the nameplate for the band saw. The table saw explicitly requires 230V, which may need a dedicated circuit. This is a key installation difference for your shop.
Which tool fits your shop needs
You need to resaw thick lumber
This JET band saw offers a 13-inch deep-cut resaw capacity. Its 1.75 HP motor handles thick stock in one pass. The 14-inch wheels support blades up to 3/4 inch wide. This setup lets you slice slabs into bookmatched panels without switching machines. It is built for hardwood and softwood in small production shops.
You require wide rip cuts
This table saw provides a 30-inch rip capacity. The 5 HP motor delivers high power for demanding tasks. A 30-inch commercial fence ensures precision. The 10-inch blade diameter and 230V voltage support heavy-duty cutting. You get large cast iron extension wings for a spacious work surface. This tool is designed for serious woodworking efficiency.
You want a compact footprint
The band saw measures 27 inches wide and 37 inches high. It weighs 272 pounds, making it lighter than the alternative. The 116-inch blade loop fits tight spaces. You get a ground cast-iron table that tilts 0–45 degrees right. This model includes a steel stand and machined-aluminum fence. It is ready to cut with a 5-year warranty.
Quick picks
| # | Product | Best for | Price |
|---|---|---|---|
| 1 | JET 14-Inch 1.75 HP Band Saw | Resawing thick hardwoods and slabs | Check price of JET 14-Inch 1.75 HP Band Saw on Amazon |
| 2 | Jet Deluxe XACTA 10-Inch 5 HP Table Saw | High-capacity rip cuts and stability | Check price of Jet Deluxe XACTA 10-Inch 5 HP Table Saw on Amazon |
The products compared
JET 14-Inch 1.75 HP Band Saw
Best for: Resawing thick hardwoods and slabs
- Horsepower
- 1.75 HP (what this guide is about)
- Voltage
- 115/230V
- Cutting Width
- 13-Inch
- Dimensions
- 75.5 × 27 × 37 inches
- Weight
- 272 pounds
View on Amazon: JET 14-Inch 1.75 HP Band Saw Affiliate link
This Jet 14-inch band saw features a 1.75 HP motor and a 13-inch deep-cut resaw capacity. The 360 sq. in. ground cast-iron table tilts 0–45 degrees right for bevel cuts. It runs blades from 1/8 to 3/4 inch wide. The unit includes a steel stand and machined-aluminum resaw fence. It suits woodworkers needing thick stock capacity in a single pass.
Pros
- 1.75 HP capacitor-run motor handles thick stock
- 13-inch resaw capacity for one-pass slicing
- 360 sq. in. ground cast-iron table tilts 0–45 degrees
- Includes steel stand and machined-aluminum resaw fence
Cons
- Heavier at 272 pounds than smaller models
- Saw blade is sold separately
- Tilt direction limited to right only
Good fit if
- You need to resaw thick hardwoods or slabs
- You want a stable cast-iron table for precision
- You require a 13-inch cutting width
Skip if
- You need a left-tilting table for better visibility
- You prefer a lighter, portable unit
- You want a complete ready-to-cut package with blade
Verdict: Jet 14-Inch 1.75 HP Band Saw delivers serious resaw power for dedicated woodworkers. It fits shops focused on thick stock processing rather than general light-duty tasks.
Jet Deluxe XACTA 10-Inch 5 HP Table Saw
Best for: High-capacity rip cuts and stability
- Horsepower
- 5 HP (what this guide is about)
- Blade Diameter
- 10-Inch
- Rip Capacity
- 30-Inch
- Voltage
- 230V
- Dimensions
- 65 × 36 × 38 inches
- Weight
- 330 pounds
View on Amazon: Jet Deluxe XACTA 10-Inch 5 HP Table Saw Affiliate link
This JET table saw features a 5 HP motor and a 30-inch rip capacity. It runs on 230V power. The 330-pound build includes a 30-inch fence and large cast iron wings. You get a 10-inch blade diameter for standard cuts. The rail-mounted switch offers easy access. This setup suits serious woodworking tasks.
Pros
- 5 HP motor for high power
- 30-inch rip capacity for wide stock
- 30-inch commercial XACTA fence II
- 330-pound weight for stability
Cons
- Requires 230V power supply
- Heavy 330-pound weight
- No app or remote control
Good fit if
- You need a 30-inch rip capacity
- You have a 230V power source
- You want a heavy, stable saw
Skip if
- You only have 110V outlets
- You need a portable saw
- You want smart app connectivity
Verdict: JET 10-Inch 5 HP Table Saw delivers serious capacity and stability. It fits workshops that need wide rip space and 230V power.
Specifications side by side
| Spec | JET 14-Inch 1.75 HP Band Saw | Jet Deluxe XACTA 10-Inch 5 HP Table Saw |
|---|---|---|
| Blade Diameter | not stated | 10-Inch |
| Rip Capacity | not stated | 30-Inch |
| Horsepower | 1.75 HP | 5 HP |
| Voltage | 115/230V | 230V |
| Cutting Width | 13-Inch | not stated |
| Dimensions | 75.5 × 27 × 37 inches | 65 × 36 × 38 inches |
| Weight | 272 pounds | 330 pounds |
| Color | White | White |
| Model | 714400K | JTAS-10XL30-5/1DX |
Frequently asked questions
Can a 1.75 HP saw cut thick hardwoods?
Yes, the Jet 14-Inch 1.75 HP Band Saw handles thick hardwoods well. It offers a 13-inch cutting width for deep resawing. This capacity allows you to process slabs and large stock efficiently. The motor provides consistent power for dedicated woodworkers focused on heavy material processing.
Is 5 HP better for rip cuts?
The Jet Deluxe XACTA 10-Inch 5 HP Table Saw excels at rip cuts. It provides a 30-inch rip capacity for wide boards. The 5 HP motor ensures stable performance during heavy-duty tasks. This setup is ideal for workshops requiring significant width and power for large projects.
What is the weight difference between these tools?
The 1.75 HP band saw weighs 272 pounds. The 5 HP table saw weighs 330 pounds. The table saw is heavier due to its larger frame and motor. You need a sturdy floor to support both units, especially the heavier table saw model.
Do these tools require special electrical outlets?
The 5 HP table saw requires 230V power. This voltage supports its high-capacity motor and stability. The 1.75 HP band saw does not list a specific voltage in the data. You must check your shop’s electrical capacity before installing the 5 HP unit.
How big is the footprint of each saw?
The 1.75 HP band saw measures 27 inches wide and 75.5 inches long. The 5 HP table saw measures 36 inches wide and 65 inches long. The band saw is longer, while the table saw is wider. Plan your shop layout carefully to accommodate these dimensions.
Which tool is best for resawing?
The Jet 14-Inch 1.75 HP Band Saw is best for resawing. It features a 13-inch cutting width for thick stock. This tool fits shops focused on processing thick lumber rather than general tasks. It delivers serious power for dedicated resawing work.