Looking Beyond the Delta 10" Sliding Compound Miter? 6 Alternatives Worth a Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Delta 10" Sliding Compound Miter Saw offers a 15-amp motor and 4,000 RPM speed for precise cuts. If you are looking for delta 10 sliding compound miter alternatives, you may want a different size or feature set. This saw measures 29.5 inches deep and weighs 62 pounds. Its dual bevel capability and shadow guide suit stationary workbenches well. You might prefer a lighter tool for job site transport. A single bevel saw could save space and weight. Some users need a wider sliding range for thick lumber. Others prioritize a rack and pinion fence for table saw accuracy. We selected these options because their specifications overlap with the Delta model. Each alternative matches the 10-inch blade diameter and 120V power requirement. You will find variations in weight, dimensions, and bevel types. This list helps you compare specs to find the right fit for your specific needs.
Our top pick: Delta 10-Inch Dual Bevel Sliding Miter Saw.
Comparing key specs and features
Metabo HPT 10-Inch Compound Miter Saw
The Metabo HPT C10FCG2 is significantly lighter at 24.2 pounds compared to the Delta’s 62 pounds. It measures 23.6 inches deep, making it much more compact for transport. This model is a single bevel saw, so you lose the dual bevel capability found in the Delta. It retains a 15-amp motor and 10-inch blade. You should choose this if portability is your main concern and you do not need angled cuts on both sides of the blade. The trade-off is weight and bevel versatility for easier handling on job sites.
SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand
The SKIL TS6307-00 is a jobsite table saw, not a miter saw. It weighs 51.2 pounds and includes a stand. This option is for users who need rip cuts and cross-cuts on a flat surface rather than angled miter cuts. It features a rack and pinion fence for fence accuracy. The blade diameter is 10 inches with a 15-amp motor. You should pick this if you need a versatile cutting tool for ripping wide boards. It gives up the sliding miter function and bevel angles of the Delta in exchange for a flat table surface and portable stand.
SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw
The SKIL MS6305-00 is a sliding compound miter saw with dual bevel capability like the Delta. It weighs 39.4 pounds, which is lighter than the Delta’s 62 pounds. It measures 35.4 inches deep, making it longer than the Delta’s 29.5-inch depth. This saw is designed for handling wide stock, such as 2x12 boards. It shares the 10-inch blade size. You should choose this if you need to cut wider boards without flipping them. It offers similar dual bevel functionality but with a different footprint and weight distribution for different workspace constraints.
DEWALT 10-Inch Table Saw with Rolling Stand
The DEWALT DWE7491RS is a table saw with a rolling stand. It weighs 110 pounds, making it much heavier than the Delta miter saw. It is designed for rip cuts and general woodworking on a flat surface. The blade diameter is 10 inches with a 15-amp motor. This option is for users who need high rip capacity and portability via the rolling stand. You should pick this if you require a table saw rather than a miter saw. It lacks the sliding and bevel features of the Delta but provides a stable surface for long cuts.
DOVAMAN 10-Inch 2-Speed Sliding Miter Saw
The DOVAMAN DMS01A is a 2-speed sliding miter saw. It weighs 37.5 pounds, lighter than the Delta’s 62 pounds. It measures 34 inches deep, which is longer than the Delta. This saw offers two speed settings for cutting different materials. It has a 15-amp motor and 10-inch blade. You should choose this if you cut multiple materials and need variable speed control. It gives up the dual bevel feature of the Delta but provides speed flexibility. The weight and depth differences make it a distinct alternative for multi-material projects.
VEVOR 10-Inch Dual Bevel Sliding Miter Saw
The VEVOR J1G-ZP33-K255D is a dual bevel sliding miter saw. It weighs 39.7 pounds, lighter than the Delta. It measures 30.3 inches deep, slightly longer than the Delta. This saw includes an LED light for precision. It has a 15-amp motor and 10-inch blade. You should pick this if you need dual bevel cuts and better visibility with the LED. It offers similar bevel functionality but with a different weight and lighting feature. The depth is comparable, but the weight difference may affect portability and stability for your specific workspace needs.
Quick picks
Our 7 picks
Delta 10-Inch Dual Bevel Sliding Miter Saw
Best for: Precise dual bevel and miter cuts
- Blade Diameter
- 10”
- Amperage
- 15 amp
- No-Load Speed
- 4,000 RPM
- Voltage
- 120V
- Dimensions
- 29.5 × 22.5 × 20 inches
- Weight
- 62 pounds
View on Amazon: Delta 10-Inch Dual Bevel Sliding Miter Saw Affiliate link
The Delta 10" Sliding Compound Miter Saw features a 15-amp motor running at 4,000 RPM. It includes a shadow guide for accurate cutting lines and a blade brake for safety. The saw supports dual bevel cuts and has a 55 lb weight. It suits woodworkers needing precise miter and bevel adjustments for various projects.
Pros
- 15-amp motor delivers 4,000 RPM for powerful cuts
- Shadow guide projects a consistent cutting line
- Dual bevel capability with 45° left and right angles
- Blade brake enhances user safety
Cons
- Heavier at 55 lbs, reducing portability
- Short 7 ft cord limits reach
- Single bevel miter capacity is limited to 50° left and 60° right
Good fit if
- You need precise dual bevel cuts
- You value a shadow guide for accuracy
- You have a dedicated workspace for a heavier saw
Skip if
- You require high portability for jobsites
- You need extended cord length
- You prefer a lighter tool for frequent moves
Verdict: Delta 10" Sliding Compound Miter Saw is ideal for users who prioritize cutting accuracy and dual bevel versatility in a stationary setting. Its robust motor and safety features make it a solid choice for detailed woodworking tasks.
Metabo HPT 10-Inch Compound Miter Saw
Best for: portable single bevel cutting tasks
- Blade Diameter
- 10-Inch
- Amperage
- 15-Amp
- No-Load Speed
- 5,000 RPM
- Dimensions
- 23.6 × 18.3 × 21.8 inches
- Weight
- 24.2 pounds
View on Amazon: Metabo HPT 10-Inch Compound Miter Saw Affiliate link
The Metabo HPT C10FCG2 is a 10-inch single bevel compound miter saw with a 15-amp motor and 5,000 RPM no-load speed. Weighing 24.2 pounds, it offers high portability for job sites. The 0-52 degree miter range and 0-45 degree bevel range provide versatile cutting angles. This tool suits woodworkers who need a lightweight, durable saw with a 5-year warranty for precise, efficient cuts.
Pros
- 15-amp motor delivers 5,000 RPM for powerful cutting performance
- Lightweight 24.2-pound design ensures easy transport and storage
- 0-52 degree left and right miter range offers wide flexibility
- Includes a 5-year warranty for long-term durability
Cons
- Single bevel capability limits angled cuts compared to dual bevel models
- 24.2-pound weight may feel less substantial for heavy-duty stationary work
- No laser or LED shadow line for enhanced cut visibility mentioned
Good fit if
- You need a lightweight saw for frequent job site travel
- You require a 0-52 degree miter range for complex angles
- You value a 5-year warranty for tool reliability
Skip if
- You require dual bevel cutting for faster angled adjustments
- You prefer a saw with integrated laser or LED guides
- You need a heavier, more rigid base for stationary shop use
Verdict: Metabo HPT 10-Inch Single Bevel Miter Saw fits contractors who prioritize portability and a 5-year warranty over dual bevel convenience.
SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand
Best for: portable jobsite accuracy and portability
- Blade Diameter
- 10-Inch
- Amperage
- 15 Amp
- Intended Use
- Jobsite
- Dimensions
- 1 × 1 × 1 inches
- Weight
- 51.2 pounds
View on Amazon: SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand Affiliate link
This SKIL jobsite table saw features a 15-amp motor and a 10-inch blade. It includes a rack and pinion fence system for accurate cuts and an integrated folding stand for portability. The saw cuts 4x4 material at 90 degrees and offers a 2-47 degree bevel range. Weighing 51.2 pounds, it suits contractors who need reliable performance on site.
Pros
- 15-amp motor for robust power
- Rack and pinion fence rails ensure parallel alignment
- Integrated folding stand aids portability
- 4x4 cutting capacity at 90 degrees
Cons
- Single bevel capability limits complex angles
- 51.2-pound weight adds to transport effort
- No mention of a zero-clearance insert plate included
Good fit if
- You need a portable saw for job sites
- You require a sturdy rack and pinion fence
- You want a 4x4 cutting capacity
Skip if
- You need dual bevel cutting capability
- You prefer a lighter unit under 40 pounds
- You require a zero-clearance insert included
Verdict: SKIL 10-Inch Jobsite Table Saw TS6307 delivers precise cuts via its rack and pinion fence, making it a solid choice for contractors who prioritize fence accuracy and portability on the job site.
SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw
Best for: cross-cutting wide boards with two-way bevels
- Blade Diameter
- 10"
- Amperage
- 15 AMP
- No-Load Speed
- 4,800 RPM
- Dimensions
- 35.4 × 22.4 × 14.2 inches
- Weight
- 39.4 pounds
View on Amazon: SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw Affiliate link
This 10-inch sliding compound miter saw runs on a 15-amp motor reaching 4,800 RPM. You get dual-bevel capability with four stops, miter cuts up to 50 degrees each direction, and cross-cutting capacity up to 2x12 lumber at 90 degrees. It suits woodworkers who need wide-board cross cuts and dual beveling without flipping stock over.
Pros
- Dual bevel design with stops at 48° and 45° left, 0°, and 45° right
- Cross cuts lumber up to 2x12 at 90 degrees and 2x8 at 45 degrees
- Miter range extends to 50 degrees left and right with 11 positive stops
- LED shadow line cut indicator for blade alignment
Cons
- Motor speed tops out at 4,800 RPM rather than 5,000 RPM
- Long 35.4-inch footprint requires substantial benchtop depth
Good fit if
- You cross cut wide lumber up to 2x12 dimensions at 90 degrees.
- You bevel in both left and right directions without turning boards around.
- You require miter angles up to 50 degrees on either side.
Skip if
- You prefer a no-load motor speed higher than 4,800 RPM.
- You work in a tight workspace unable to fit a 35.4-inch overall length.
Verdict: SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw gives woodworkers the capacity for 2x12 cross cuts and dual-sided beveling. It fits users who prioritize wide stock handling over compact bench depth.
DEWALT 10-Inch Table Saw with Rolling Stand
Best for: portable jobsite use with wide rip needs
- Blade Diameter
- 10 Inch
- Rip Capacity
- 32-1/2-Inch
- Amperage
- 15 Amp
- No-Load Speed
- 4800 RPM
- Cutting Depth 90
- 3-1/8"
- Dimensions
- 12.2 × 9.65 × 12.2 inches
View on Amazon: DEWALT 10-Inch Table Saw with Rolling Stand Affiliate link
This DEWALT table saw pairs a 15-amp motor with a rolling stand for portable power. It offers a 32-1/2-inch rip capacity and a 3-1/8-inch cutting depth at 90 degrees. The rack and pinion fence ensures smooth adjustments. You get a large 21-7/8 by 26-3/8-inch table surface for material support. The onboard storage keeps accessories organized. It suits you if you need a portable saw with high capacity.
Pros
- 32-1/2-inch rip capacity handles wide materials
- Rack and pinion fence adjusts fast and accurately
- 15-amp motor cuts through hardwoods easily
- Rolling stand offers stability and portability
- Onboard storage holds blade guard and wrenches
Cons
- 110-pound weight requires effort to move
- Single bevel cutting limits angled joinery
- No-Load speed of 4800 RPM is lower than some competitors
Good fit if
- You need to move the saw between job sites
- You frequently cut wide sheets or shelving materials
- You want a stable surface for large workpieces
Skip if
- You require dual bevel cutting capabilities
- You have limited storage space for a heavy unit
- You prefer a lighter saw for frequent lifting
Verdict: DEWALT 10-Inch Table Saw with Rolling Stand delivers a high rip capacity and durable stand for users who prioritize portability and wide cuts. It fits contractors and DIYers who need to transport a powerful saw to different locations.
DOVAMAN 10-Inch 2-Speed Sliding Miter Saw
Best for: Multi-material cutting with a wide sliding range
- Blade Diameter
- 10"
- Amperage
- 15 A
- No-Load Speed
- 5000 RPM, 3200 RPM
- Feed Speed
- 2-Speed
- Dimensions
- 34 × 20 × 15 inches
- Weight
- 37.5 pounds
View on Amazon: DOVAMAN 10-Inch 2-Speed Sliding Miter Saw Affiliate link
The DOVAMAN 10-inch sliding miter saw offers a 15-amp motor with dual-speed settings of 5000 RPM and 3200 RPM. It includes three blades for cutting wood, PVC, and soft metals. The 13-inch sliding rail allows for a 4 by 13-inch cutting capacity. An ambidextrous design and laser guide support precision work. This tool suits users who need versatility across different materials.
Pros
- Dual-speed motor for wood and soft metals
- Includes three blades for multi-material use
- 13-inch sliding rail for wide cuts
- Ambidextrous design for left and right hands
Cons
- Single bevel cutting only
- No dust collection bag included
- Heavier than compact jobsite models
Good fit if
- You cut wood, PVC, and soft metals
- You need a wide cutting capacity
- You prefer ambidextrous controls
Skip if
- You require dual bevel capability
- You need a lighter portable saw
- You only cut wood
Verdict: DOVAMAN 10-Inch 2-Speed Sliding Miter Saw fits users who cut multiple materials and need a wide sliding range. It is a practical option for multi-material projects.
VEVOR 10-Inch Dual Bevel Sliding Miter Saw
Best for: Detailed joinery and dual bevel cuts
- Blade Diameter
- 10"
- Amperage
- 15 Amp
- No-Load Speed
- 5000 RPM
- Dimensions
- 30.3 × 20.9 × 27.6 inches
- Weight
- 39.7 pounds
View on Amazon: VEVOR 10-Inch Dual Bevel Sliding Miter Saw Affiliate link
The VEVOR 10-inch sliding compound miter saw features a 15-amp motor running at 5000 RPM. Its dual bevel capability allows for bi-directional angled cuts, while the axial sliding system handles wider crosscuts. An LED guide and precision scales improve cut accuracy. This unit weighs 39.7 pounds and measures 30.3 inches long, making it a solid option for detailed woodworking projects.
Pros
- 15-amp motor delivers 5000 RPM for efficient cutting
- Dual bevel design supports bi-directional angled cuts
- LED guide projects crisp lines for precise alignment
- Axial sliding system enables wider crosscuts
Cons
- 39.7 pounds is heavier than some competitors
- No mention of a dust collection port
- Includes only a 60-tooth blade
Good fit if
- You need dual bevel cuts for complex joinery
- You value LED precision guides for accuracy
- You want a sliding saw under 40 pounds
Skip if
- You require a single bevel saw only
- You need a blade with more than 60 teeth
- You prioritize a lighter tool under 35 pounds
Verdict: VEVOR 10" Dual Bevel Sliding Miter Saw fits woodworkers who need dual bevel cuts and LED precision in a portable package. It suits detailed projects where accurate angled cuts matter more than maximum blade tooth count.
Specifications side by side
| Spec | Delta 10-Inch Dual Bevel Sliding Miter Saw | Metabo HPT 10-Inch Compound Miter Saw | SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand | SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw | DEWALT 10-Inch Table Saw with Rolling Stand | DOVAMAN 10-Inch 2-Speed Sliding Miter Saw | VEVOR 10-Inch Dual Bevel Sliding Miter Saw |
|---|---|---|---|---|---|---|---|
| Blade Diameter | 10” | 10-Inch | 10-Inch | 10" | 10 Inch | 10" | 10" |
| Rip Capacity | not stated | not stated | not stated | not stated | 32-1/2-Inch | not stated | not stated |
| Amperage | 15 amp | 15-Amp | 15 Amp | 15 AMP | 15 Amp | 15 A | 15 Amp |
| No-Load Speed | 4,000 RPM | 5,000 RPM | not stated | 4,800 RPM | 4800 RPM | 5000 RPM, 3200 RPM | 5000 RPM |
| Cutting Depth 90 | not stated | not stated | not stated | not stated | 3-1/8" | not stated | not stated |
| Voltage | 120V | not stated | not stated | not stated | not stated | not stated | not stated |
| Intended Use | not stated | not stated | Jobsite | not stated | not stated | not stated | not stated |
| Feed Speed | not stated | not stated | not stated | not stated | not stated | 2-Speed | not stated |
| Dimensions | 29.5 × 22.5 × 20 inches | 23.6 × 18.3 × 21.8 inches | 1 × 1 × 1 inches | 35.4 × 22.4 × 14.2 inches | 12.2 × 9.65 × 12.2 inches | 34 × 20 × 15 inches | 30.3 × 20.9 × 27.6 inches |
| Weight | 62 pounds | 24.2 pounds | 51.2 pounds | 39.4 pounds | 110 pounds | 37.5 pounds | 39.7 pounds |
| Color | 10 Inch | Green | 10" Table Saw | Multi | Yellow/Black/Silver Table Saw/Stand | A-black | Black |
| Model | 26-2241 | C10FCG2 | TS6307-00 | MS6305-00 | DWE7491RS | DMS01A | J1G-ZP33-K255D |
| Size | not stated | not stated | 10'' | 10'' | One Size | 10 Inch | 10 in |
For a related comparison, read tosot 10 alternatives.
Frequently asked questions
Which sliding miter saw is best for dual bevel cuts?
The Delta 10-Inch Dual Bevel Sliding Miter Saw is the top choice for this feature. It measures 29.5 inches in length and weighs 62 pounds. The SKIL MS6305-00 is another strong option. It offers dual-sided beveling and weighs 39.4 pounds. The VEVOR J1G-ZP33-K255D also provides dual bevel cuts with an LED light for precision.
What is the lightest miter saw on this list?
The Metabo HPT C10FCG2 is the lightest option at 24.2 pounds. It is a single bevel saw designed for portability. The DOVAMAN DMS01A is the next lightest at 37.5 pounds. It features a 2-speed motor for multi-material cutting. The SKIL MS6305-00 follows closely at 39.4 pounds.
Which saw has the deepest footprint for stability?
The Delta 26-2241 has the deepest footprint at 29.5 inches. This depth provides stability for stationary use. The SKIL MS6305-00 is the deepest at 35.4 inches. The VEVOR J1G-ZP33-K255D measures 30.3 inches in length. These dimensions help support wider boards during sliding cuts.
Are there jobsite table saws in these alternatives?
Yes, the SKIL TS6307-00 is a jobsite table saw. It weighs 51.2 pounds and features a rack and pinion fence for accuracy. The DEWALT DWE7491RS is another option. It comes with a rolling stand and weighs 110 pounds. This setup offers high rip capacity for portable jobsite use.
Which saw supports cutting 2x12 lumber?
The SKIL MS6305-00 is designed for wide stock handling. It can cross-cut 2x12 boards. The Delta 26-2241 also handles detailed woodworking tasks with its 10-inch blade. The DOVAMAN DMS01A offers a wide sliding range for various materials. These models provide the capacity needed for wider boards.
Is there a 2-speed miter saw available?
The DOVAMAN DMS01A is a 2-speed sliding miter saw. It allows you to adjust speed for different materials. It weighs 37.5 pounds and measures 34 inches in length. This feature makes it practical for multi-material projects. Other models on the list operate at a single speed setting.