Best Skil Table Saws: 15 Models Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best skil table saws requires matching equipment formats to your workshop projects. Across this range, Skil provides compact benchtop units, miter saws with LED shadow guides, and handheld saws with blade sizes from 7-1/4 inches to 16-5/16 inches.
The SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand takes the top spot because it provides 15-amp power, rack-and-pinion fence alignment, and 4x4 cutting capacity for mobile jobsite tasks. This guide evaluates 15 models strictly through the specifications published on their listings to help you compare dimensions and cutting capabilities.
Quick picks
Our 15 picks
SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand
Best for: jobsite woodworkers needing 4x4 cutting capacity
- Blade Diameter
- 10-Inch
- Amperage
- 15 Amp
- Intended Use
- Jobsite
- Dimensions
- 1 × 1 × 1 inches
- Weight
- 51.2 pounds
View on Amazon: SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand
The Skil 10-Inch Jobsite Table Saw with Folding Stand is a corded jobsite saw built for standard cutting tasks. You get a 15-amp motor driving a 10-inch blade, rack-and-pinion fence rails for parallel alignment, and a 4x4 cutting capacity at 90 degrees. Integrated folding legs let you fold the base for transport. It suits woodworkers and jobsite users needing a full-size blade with portable storage.
Pros
- Rack-and-pinion fence rails maintain parallel alignment with the blade
- Cuts 4x4 material in a single pass at 90 degrees
- Integrated folding stand allows compact storage and setup
- Bevel capacity from 2 to 47 degrees with stops at 0 and 45 degrees
- Micro-adjustment feature allows parallel blade alignment to the miter slot
Cons
- Weighs 51.2 pounds without transport wheels on the stand legs
- Rip capacity width is not listed in the published specifications
Good fit if
- You need to cut 4x4 lumber at 90 degrees on a jobsite.
- You want rack-and-pinion fence rails for smooth, parallel blade tracking.
- You require an integrated folding stand for transport and storage.
Skip if
- You need a wheeled rolling stand for easier solo transport.
- You prefer an ultra-compact benchtop saw weighing under 50 pounds.
Verdict: Skil 10-Inch Jobsite Table Saw with Folding Stand delivers standard 15-amp power and 4x4 cut depth alongside dependable rack-and-pinion fence alignment. It provides full 10-inch capacity in a portable folding format.
SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw
Best for: wide crosscuts and angled miter cuts
- Blade Diameter
- 10"
- Amperage
- 15 AMP
- No-Load Speed
- 4,800 RPM
- Dimensions
- 35.4 × 22.4 × 14.2 inches
- Weight
- 39.4 pounds
View on Amazon: SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw
This tool is a 10-inch sliding compound miter saw powered by a 15-amp motor running at 4,800 RPM. It handles cross cuts up to 2x12 lumber at 90 degrees and 2x8 lumber at 45 degrees. An integrated LED shadow line marks cut lines clearly. With dual bevel stops and 50-degree miter angles in both directions, it suits you if your workshop tasks require angled crosscuts across framing boards.
Pros
- 15-amp motor delivers 4,800 RPM
- Cross cuts lumber up to 2x12 at 90 degrees and 2x8 at 45 degrees
- LED shadow line indicates cut alignment
- Dual bevel stops at 48 and 45 degrees left, 0, and 45 degrees right
Cons
- Footprint measures 35.4 inches long by 22.4 inches wide
- Weight reaches 39.4 pounds
Good fit if
- You need to crosscut lumber up to 2x12 dimensions.
- You require bevel cuts up to 48 degrees left and 45 degrees right.
- You want cutline visibility using an LED shadow line.
Skip if
- You need to rip wide sheet goods continuously.
- You want a saw lighter than 39.4 pounds.
Verdict: Skil 10-Inch Dual Bevel Sliding Compound Miter Saw delivers 4,800 RPM and crosscuts lumber up to 2x12 at 90 degrees. It provides dual-bevel stops and an LED shadow guide for framing and trim cuts.
Skil 7-1/4-Inch Worm Drive Circular Saw
Best for: handheld framing and angled bevel cuts
- Blade Diameter
- 7-1/4"
- Amperage
- 15 A
- Dimensions
- 20.5 × 7.75 × 8.75 inches
- Weight
- 11.5 pounds
This handheld circular saw gives you a 15-amp motor paired with a 7-1/4-inch blade and a worm-drive layout. Built with magnesium components, it weighs 11.5 pounds and offers a bevel capacity up to 53 degrees. Its cut-ready depth system assists with quick measurement adjustments on the job. This saw suits you if you need a dedicated handheld ripping and framing tool alongside stationary table saws on your jobsite.
Pros
- 15-amp motor provides high cutting power
- Bevel capacity tilts up to 53 degrees
- Magnesium construction keeps weight to 11.5 pounds
- Cut-ready depth system enables fast depth settings
- Anti-snag lower guard assists with small cut-offs
Cons
- Handheld design lacks a stationary work table
- Blade capacity is limited to 7-1/4 inches
Good fit if
- You need a 15-amp handheld worm-drive saw weighing 11.5 pounds.
- You require bevel cuts up to 53 degrees.
- You make frequent depth adjustments using marked reference settings.
Skip if
- You need a stationary table saw with an integrated rip fence.
- You require a larger 10-inch blade for deeper cut capacities.
Verdict: Skil 7-1/4-Inch Worm Drive Circular Saw delivers 15 amps of motor power and a 53-degree bevel in an 11.5-pound magnesium body. It provides a portable handheld alternative when stationary table saws are impractical for the task.
Skil 16-5/16-Inch Magnesium Worm Drive Circular Saw
Best for: cutting 6x lumber and thick timbers
- Blade Diameter
- 16-5/16 In.
- Amperage
- 15 AMP
- Dimensions
- 24.5 × 10 × 17.5 inches
- Weight
- 27.3 pounds
View on Amazon: Skil 16-5/16-Inch Magnesium Worm Drive Circular Saw
This is a heavy-duty worm drive circular saw built with an all-magnesium housing. You get a massive 16-5/16-inch blade diameter and a 15-amp Dual-Field motor engineered to cut through materials up to 6-1/4 inches thick in a single pass. Weighing 27.3 pounds, it suits you if you need deep cutting capacity for 6x lumber instead of a stationary table saw setup.
Pros
- 6-1/4-inch cutting capacity clears 6x lumber in a single pass
- Large 16-5/16-inch blade included in the box
- 15-amp Dual-Field motor designed to keep cooler under load
- All-magnesium construction with die-cast footplate
Cons
- Heavy 27.3-pound weight makes handling demanding
- Lacks a tabletop work surface or integrated rip fence
Good fit if
- You need to cut lumber up to 6-1/4 inches thick in one pass.
- You want worm drive power with a cooler-running 15-amp motor.
Skip if
- You require a stationary table saw with a wide rip capacity.
- You prefer a lightweight tool under 27.3 pounds.
Verdict: Skil 16-5/16-Inch Magnesium Worm Drive Circular Saw delivers a 6-1/4-inch cutting depth for lumber up to 6x thickness. Its 15-amp motor and large blade provide deep-cutting capability that standard benchtop saws cannot match.
Skil 10-1/4-Inch Magnesium Worm Drive Circular Saw
Best for: single-pass 4x cuts and heavy framing
- Blade Diameter
- 10-1/4"
- Amperage
- 15 A
- Dimensions
- 20 × 12.5 × 16.5 inches
- Weight
- 16.5 pounds
View on Amazon: Skil 10-1/4-Inch Magnesium Worm Drive Circular Saw
This tool is a corded worm drive circular saw built with a 15-amp Dual-Field motor and magnesium components. It runs a 10-1/4-inch blade engineered to cut 4x lumber cleanly in a single pass. You also get a 51-degree bevel capacity and an anti-snag lower guard. It suits you if you need deep cutting depth and handheld portability on jobsite framing tasks instead of a benchtop table saw setup.
Pros
- 15-amp Dual-Field motor provides heavy-duty power
- Cuts 4x lumber in a single pass with 10-1/4-inch blade
- Bevel capacity adjusts up to 51 degrees
- Anti-snag lower guard handles small cut-off pieces
Cons
- Weighs 16.5 pounds for handheld operation
- Handheld design lacks a stationary rip fence and table surface
- Requires specific 10-1/4-inch diameter blades
Good fit if
- You need to cut through 4x material in one pass.
- You prefer a handheld worm drive saw over a stationary table saw.
- You make bevel cuts up to 51 degrees on framing stock.
Skip if
- You need a dedicated table saw with a flat table and rip fence.
- You prefer a lighter handheld saw under 16.5 pounds.
Verdict: Skil 10-1/4-Inch Magnesium Worm Drive Circular Saw delivers 15-amp power and 4x single-pass cutting for heavy framing lumber. Choose it when you need portable worm drive performance rather than a stationary table saw setup.
Skil 16-Inch Variable Speed Scroll Saw
Best for: detailed curved cuts and craft woodworking
- Amperage
- 1.2 Amp
- Dimensions
- 1 × 1 × 1 inches
- Weight
- 24.7 pounds
This benchtop scroll saw delivers a 1.2-amp motor and a 16-inch cutting capacity for intricate woodworking projects. You get a 16 by 10-inch work table that tilts from 0 to 45 degrees for bevel cuts, alongside electronic variable speed control. Built-in LED lighting and dust removal keep cut lines clear. It suits you if you need fine detail work rather than straight rip cuts.
Pros
- 16 in. x 10 in. work table tilts 0 to 45 degrees
- Keyless blade change system
- Electronic variable speed control
- Integrated LED work light and dust removal system
Cons
- 1.2-amp motor provides less cutting power than table saws
- 16-inch throat restricts maximum cut depth on wide boards
Good fit if
- You cut fine curves, craft patterns, or delicate shapes in wood.
- You need bevel cuts up to 45 degrees on small workpieces.
Skip if
- You need to rip wide sheet goods or thick construction lumber.
- You require the higher power of a standard 15-amp jobsite table saw.
Verdict: Skil 16-Inch Variable Speed Scroll Saw provides controlled curved cuts and beveling on small stock. It handles delicate craft tasks where larger rip saws cannot fit.
Skil 9-Inch 2-Speed Benchtop Band Saw
Best for: controlled dual-speed benchtop woodwork
- Amperage
- 2.8 Amp
- Feed Speed
- 2-Speed
- Dimensions
- 1 × 1 × 1 inches
The Skil 9-Inch 2-Speed Benchtop Band Saw gives you a compact cutting station driven by a 2.8-amp induction motor. You get a two-speed drive system with tool-free belt tensioning, ball bearing blade guides, and rack-and-pinion table angle adjustment. It also features a 2.5-inch dust port and an included miter gauge. This setup suits you if you need a dedicated benchtop saw for controlled curved and angled cuts.
Pros
- Two-speed drive system with tool-free belt tensioning
- 2.8-amp induction motor with steel stabilizing base
- Rack and pinion table adjustment for quick angle settings
- Standard 2.5-inch dust port for shop vacuum connection
Cons
- 2.8-amp motor offers lower power than 15-amp saws
- Includes a miter gauge but lists no rip fence
Good fit if
- You need dual cutting speeds with tool-free belt tensioning.
- You want rack-and-pinion adjustments for angled cuts on a steel base.
- You work with standard 2.5-inch vacuum hoses for dust collection.
Skip if
- You need the high power of a 15-amp table saw.
- You require an included rip fence for straight guide cuts.
Verdict: Skil 9-Inch 2-Speed Benchtop Band Saw delivers dual-speed capability, rack-and-pinion angle adjustments, and induction motor reliability for workshop projects. It is a solid choice when you need controlled cutting precision on a stabilized benchtop footprint.
SKIL 8-1/4-Inch Compact Jobsite Table Saw
Best for: portable sheet ripping on tight jobsites
- Blade Diameter
- 8-1/4-Inch
- Rip Capacity
- 24.5-inch
- Amperage
- 15 Amp
- Cutting Depth 90
- 2-1/2-inch
- Intended Use
- Jobsite
- Dimensions
- 26 × 22.8 × 13 inches
The Skil 8-1/4-Inch Compact Jobsite Table Saw delivers portable cutting capacity for your jobsite or workshop. It features a 15-amp motor, an 8-1/4-inch blade diameter, and rack-and-pinion fence rails. You get a 24.5-inch right rip capacity and a 2-1/2-inch maximum cut depth at 90 degrees. At 40 pounds, this aluminum-table saw suits you if you need reliable sheet cutting in a lightweight, compact footprint without an integrated stand.
Pros
- Rack-and-pinion fence rails maintain parallel alignment with the blade
- 24.5-inch right rip capacity accommodates sheet goods
- 15-amp motor delivers up to 2-1/2-inch depth of cut at 90 degrees
- 40-pound total weight simplifies jobsite transport and storage
- Micro-adjustment feature aligns blade parallel to fence and miter slot
Cons
- Stand is sold separately rather than included in the box
- 8-1/4-inch blade limits cutting depth compared to 10-inch models
- Rip capacity to the left of the blade is limited to 12 inches
Good fit if
- You need a compact 40-pound table saw for easy transport and storage.
- You want rack-and-pinion fence adjustments with up to 24.5 inches of rip capacity.
- You cut stock up to 2-1/2 inches thick on an existing bench or work surface.
Skip if
- You need an included folding stand out of the box.
- You require more than 2-1/2 inches of cutting depth in a single pass.
Verdict: Skil 8-1/4-Inch Compact Jobsite Table Saw delivers a 15-amp motor, rack-and-pinion fence, and 24.5-inch rip capacity in a 40-pound frame. It is an efficient, space-saving option if you provide your own stand or workbench.
Skil Flooring Saw with 36T Blade
Best for: solid, engineered, and laminate flooring installations
- Dimensions
- 28.9 × 20.1 × 13 inches
- Weight
- 30 pounds
The Skil Flooring Saw with 36T Blade is a specialized cutting tool designed for solid, engineered, and laminate flooring. Weighing 30 pounds and measuring 28.9 by 20.1 by 13 inches, this unit offers portable handling for indoor installations. It performs rip, cross, and miter cuts using an included 36T contractor blade and a die-cast aluminum fence. It suits you if you need a dedicated, compact flooring cutter rather than a standard jobsite saw.
Pros
- Performs cross, miter, and rip cuts
- Miter detents at 0, 22.5, and 45 degrees
- Die-cast aluminum miter and rip fence
- Weighs 30 pounds for portable transport
- Comes with a 36T contractor blade
Cons
- Designed for flooring materials rather than general lumber
- No integrated stand listed in specifications
Good fit if
- You cut solid, engineered, or laminate flooring planks.
- You need a portable 30-pound machine for cross, miter, and rip cuts.
Skip if
- You need a full-size table saw for ripping thick construction lumber.
- You require a saw with an included folding stand.
Verdict: Skil Flooring Saw with 36T Blade provides a portable 30-pound solution configured specifically for flooring cuts. It handles miter, rip, and cross tasks through a die-cast aluminum fence without requiring a full-sized table saw.
Skil 7-1/4-Inch Left Blade Sidewinder Circular Saw
Best for: handheld cuts requiring clear left-blade visibility
- Blade Diameter
- 7-1/4 Inch
- Amperage
- 15 Amp
- Dimensions
- 12.5 × 9.75 × 9 inches
- Weight
- 10.6 pounds
View on Amazon: Skil 7-1/4-Inch Left Blade Sidewinder Circular Saw
This handheld circular saw provides an alternative to a traditional table saw for portable rip and cross cuts. It features a 15-amp Dual-Field motor, a 7-1/4-inch blade, and an all-magnesium body weighing 10.6 pounds. The left-blade orientation gives you a direct line of sight to your cutline, while the 56-degree bevel bevels past standard 45-degree angles. It suits you if you need compact, mobile cutting power.
Pros
- 15-amp motor with Dual-Field cooling design
- Left-blade layout provides direct cutline visibility
- Extended bevel capacity up to 56 degrees
- All-magnesium build keeps weight at 10.6 pounds
Cons
- Handheld design lacks a stationary rip fence and table bed
- Corded power requires continuous access to an electrical outlet
Good fit if
- You want a left-blade circular saw for clearer cutline sightlines.
- You need up to 56 degrees of bevel angle capacity.
- You prioritize a lightweight 10.6-pound magnesium frame for portable cutting.
Skip if
- You require a stationary table saw with a wide rip capacity.
- You need cordless battery-powered portability on the job.
Verdict: Skil 7-1/4-Inch Left Blade Sidewinder Circular Saw delivers 15-amp power and high-angle beveling in a 10.6-pound handheld package. It handles mobile cutting tasks where a full table saw is too bulky to transport.
Skil 7-1/4-Inch Sidewinder Circular Saw
Best for: lightweight handheld cutting and high-angle bevels
- Blade Diameter
- 7-1/4 In.
- Amperage
- 15 Amp
- Dimensions
- 14.4 × 9.84 × 7.44 inches
- Weight
- 8.6 pounds
This is a corded handheld circular saw built with a 15-amp Dual-Field motor and a 7-1/4-inch blade diameter. At 8.6 pounds, it provides a lightweight cutting option with a maximum bevel capacity of 56 degrees and a positive stop at 45 degrees. It suits you if you need portable framing power and high bevel range rather than a stationary benchtop setup.
Pros
- 15-amp Dual-Field motor designed for heat dissipation
- Weighs 8.6 pounds
- 56-degree bevel capacity with a 45-degree positive stop
- 10-foot cord reduces snagging on materials
Cons
- Handheld circular saw design rather than a stationary table saw
- Requires a continuous electrical outlet connection
Good fit if
- You need an 8.6-pound handheld saw for portable cutting tasks.
- You require steep bevel cuts up to 56 degrees.
- You want a 15-amp motor with a 10-foot power cord.
Skip if
- You require a dedicated stationary table saw with a rip fence.
- You need cordless battery mobility on job sites without outlets.
Verdict: Skil 7-1/4-Inch Sidewinder Circular Saw delivers 15 amps of motor output at an 8.6-pound operating weight with a 56-degree bevel capacity. It provides a lightweight handheld cutting option when your project does not require a stationary table saw.
SKIL 7-1/4-Inch Worm Drive Circular Saw
Best for: handheld framing cuts requiring worm drive power
- Blade Diameter
- 7-1/4"
- Power Source
- Corded
- Dimensions
- 1 × 1 × 1 inches
- Weight
- 14.2 pounds
This corded circular saw features a 7-1/4-inch blade and a worm-drive layout powered by a Dual-Field motor. It weighs 14.2 pounds without its blade, cord, or wrench, and includes a cut-ready depth adjustment system alongside a 51-degree maximum bevel. If you need portable handheld cutting capacity instead of a stationary table setup, this saw suits framing tasks, bevel cuts, and direct jobsite breakdown using its included 24-tooth Diablo carbide blade.
Pros
- Dual-Field motor designed for cooling
- 51° bevel capacity for angled cuts
- Cut-ready depth-of-cut adjustment system
- Includes 24-tooth Diablo carbide blade
Cons
- Handheld design lacks a dedicated rip fence and table
- Weighs 14.2 pounds without blade, cord, and wrench
- Requires an external AC outlet and cord
Good fit if
- You need a handheld worm-drive saw rather than a stationary table saw.
- You require bevel cuts up to 51 degrees on jobsites.
- You want an included 24-tooth Diablo carbide blade.
Skip if
- You need a stationary table saw with a wide rip capacity.
- You require a cordless battery-powered tool.
Verdict: Skil 7-1/4-Inch Corded Worm Drive Circular Saw delivers corded worm-drive torque and up to 51 degrees of bevel capacity in a handheld format. It provides portable jobsite cutting rather than a stationary table saw workstation.
Skil PWR CORE 20V Brushless Cordless Jig Saw
Best for: cordless curved cuts and beveling tasks
- Voltage
- 20V
- Dimensions
- 8.1 × 3 × 8.2 inches
- Weight
- 4.17 pounds
View on Amazon: Skil PWR CORE 20V Brushless Cordless Jig Saw
This cordless 20V jig saw kit features a digital brushless motor, weighing 4.17 pounds with an 8.1-inch length. The package includes a 2.0Ah battery, charger, wood blade, and metal blade. You get orbital settings, variable speed, an LED worklight, and tool-free adjustments for blade changes and shoe bevels. It suits you if you need portable, detailed cuts in wood or metal.
Pros
- Digital brushless motor provides high performance
- Includes 2.0Ah battery, charger, wood blade, and metal blade
- Tool-free blade changes and tool-free bevel adjustments
- LED worklight features pre-light and afterglow visibility
Cons
- Handheld jig saw design cannot make wide rip cuts like a table saw
- Single 2.0Ah battery requires charging downtime between larger tasks
Good fit if
- You need a portable saw for curved, orbital, and beveled cuts.
- You want a complete 20V cordless kit that includes a battery and charger.
Skip if
- You need a stationary table saw to rip wide sheet goods and boards.
- You require continuous AC power without managing battery recharge cycles.
Verdict: Skil PWR CORE 20V Brushless Cordless Jig Saw delivers portable curved and angled cuts with its included battery, charger, and blades. It serves as a compact, versatile handheld option alongside your primary shop saws.
Skil PWR CORE 20 Brushless 7-1/4-Inch Circular Saw
Best for: portable cordless cuts on thick lumber
- Blade Diameter
- 7-1/4-Inch
- No-Load Speed
- 5,300 RPM
- Voltage
- 20V
- Dimensions
- 13.6 × 6.85 × 11.1 inches
- Weight
- 7.05 pounds
View on Amazon: Skil PWR CORE 20 Brushless 7-1/4-Inch Circular Saw
This cordless 20V circular saw features a digital brushless motor delivering 5,300 RPM and a 7-1/4-inch blade with a 2-5/8-inch cutting depth. The saw weighs 7.05 pounds and includes a 4.0Ah battery, charger, vacuum adapter, and electric brake. Its cast aluminum shoe works with guide tracks sold separately. You gain cordless cutting mobility for ripping sheets and cutting dimensional lumber when a stationary table saw is too bulky to transport.
Pros
- 2-5/8-inch depth of cut handles 3x material in one pass
- Digital brushless motor reaches up to 5,300 RPM
- Kit includes a 4.0Ah battery, charger, blade, and vacuum adapter
- Electric brake quickly stops blade rotation
Cons
- Handheld circular saw lacking a built-in rip fence table surface
- Compatible CRT0702 track is sold separately
Good fit if
- You want a lightweight 7.05-pound cordless cutting tool instead of a heavy benchtop saw.
- You need up to 2-5/8 inches of cutting capacity using a 20V battery platform.
Skip if
- You require a fixed table saw top for repeat joinery or wide sheet ripping.
- You prefer continuous AC power without recharging batteries.
Verdict: Skil PWR CORE 20 Brushless 7-1/4-Inch Circular Saw pairs a 5,300 RPM motor with a 2-5/8-inch cut depth in a portable kit. It serves as a cordless alternative when you need quick breakdown cuts outside the workshop.
Skil 8-1/4-Inch Worm Drive Table Saw
Best for: portable jobsite ripping up to 3x material
- Blade Diameter
- 8-1/4"
- Rip Capacity
- 25 inch
- Cutting Depth 90
- 2-5/8 inch
- Dimensions
- 25.8 × 25.2 × 14.9 inches
- Weight
- 51.2 pounds
This compact jobsite table saw features worm drive gearing and an 8-1/4-inch blade diameter. You get a 25-inch rip capacity and a 2-5/8-inch cutting depth at 90 degrees to handle sheet goods and lumber up to 3x thickness. Its rack and pinion fence system enables quick adjustments on an all-metal frame weighing 51.2 pounds. It suits you if you need portable jobsite ripping power.
Pros
- Worm drive gearing delivers high torque for ripping
- Rack and pinion fence system for smooth, accurate adjustments
- 2-5/8-inch cutting depth handles up to 3x material
- 25-inch rip capacity accommodates sheet goods
- All-metal construction provides durable jobsite framing
Cons
- Smaller 8-1/4-inch blade diameter provides less depth than 10-inch models
- Rip capacity limited to 25 inches
- No stand listed in the product specifications
Good fit if
- You need worm drive gearing to rip materials up to 3x thick.
- You want a rack and pinion fence paired with a 25-inch rip capacity.
- You prefer a compact footprint weighing 51.2 pounds for mobility.
Skip if
- You require a standard 10-inch blade diameter.
- You need to rip panels wider than 25 inches.
- You want a table saw package that includes a dedicated stand.
Verdict: Skil 8-1/4-Inch Worm Drive Table Saw delivers high torque, a 25-inch rip capacity, and a 2-5/8-inch cut depth in a portable footprint. It serves you well if you need to rip sheet goods and 3x lumber on the jobsite.
Specifications side by side
| Spec | SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand | SKIL 10-Inch Dual Bevel Sliding Compound Miter Saw | Skil 7-1/4-Inch Worm Drive Circular Saw | Skil 16-5/16-Inch Magnesium Worm Drive Circular Saw | Skil 10-1/4-Inch Magnesium Worm Drive Circular Saw | Skil 16-Inch Variable Speed Scroll Saw | Skil 9-Inch 2-Speed Benchtop Band Saw | SKIL 8-1/4-Inch Compact Jobsite Table Saw | Skil Flooring Saw with 36T Blade | Skil 7-1/4-Inch Left Blade Sidewinder Circular Saw | Skil 7-1/4-Inch Sidewinder Circular Saw | SKIL 7-1/4-Inch Worm Drive Circular Saw | Skil PWR CORE 20V Brushless Cordless Jig Saw | Skil PWR CORE 20 Brushless 7-1/4-Inch Circular Saw | Skil 8-1/4-Inch Worm Drive Table Saw |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Diameter | 10-Inch | 10" | 7-1/4" | 16-5/16 In. | 10-1/4" | not specified | not specified | 8-1/4-Inch | not specified | 7-1/4 Inch | 7-1/4 In. | 7-1/4" | not specified | 7-1/4-Inch | 8-1/4" |
| Rip Capacity | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 24.5-inch | not specified | not specified | not specified | not specified | not specified | not specified | 25 inch |
| Amperage | 15 Amp | 15 AMP | 15 A | 15 AMP | 15 A | 1.2 Amp | 2.8 Amp | 15 Amp | not specified | 15 Amp | 15 Amp | not specified | not specified | not specified | not specified |
| No-Load Speed | not specified | 4,800 RPM | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 5,300 RPM | not specified |
| Cutting Depth 90 | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 2-1/2-inch | not specified | not specified | not specified | not specified | not specified | not specified | 2-5/8 inch |
| Voltage | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 20V | 20V | not specified |
| Power Source | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | Corded | not specified | not specified | not specified |
| Intended Use | Jobsite | not specified | not specified | not specified | not specified | not specified | not specified | Jobsite | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Feed Speed | not specified | not specified | not specified | not specified | not specified | not specified | 2-Speed | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Dimensions | 1 × 1 × 1 inches | 35.4 × 22.4 × 14.2 inches | 20.5 × 7.75 × 8.75 inches | 24.5 × 10 × 17.5 inches | 20 × 12.5 × 16.5 inches | 1 × 1 × 1 inches | 1 × 1 × 1 inches | 26 × 22.8 × 13 inches | 28.9 × 20.1 × 13 inches | 12.5 × 9.75 × 9 inches | 14.4 × 9.84 × 7.44 inches | 1 × 1 × 1 inches | 8.1 × 3 × 8.2 inches | 13.6 × 6.85 × 11.1 inches | 25.8 × 25.2 × 14.9 inches |
| Weight | 51.2 pounds | 39.4 pounds | 11.5 pounds | 27.3 pounds | 16.5 pounds | 24.7 pounds | not specified | 40 pounds | 30 pounds | 10.6 pounds | 8.6 pounds | 14.2 pounds | 4.17 pounds | 7.05 pounds | 51.2 pounds |
| Size | 10'' | 10'' | One Size | One Size | One Size | One Size | One Size | 8-1/4'' | One Size | One Size | One Size | One Size | 20 volts | not specified | 8-1/4" Table Saw |
| Color | 10" Table Saw | Multi | Silver | Multi | Silver | Multi | Red & Black | 8-1/4" Table Saw | Multi | Multi | Multi | Multi | Red | Silver, Black | Multi |
| Model | TS6307-00 | MS6305-00 | SPT77WML-01 | SPT70V-11 | SPT70WM-01 | SS9503-00 | BW9501-00 | TS6308-00 | 3601-02 | SPT67M8-01 | SPT67WL-01 | SPT77W-22 | JS8290B-10 | CR5440B-1C | SPT99T-01 |
Comparing the Skil Saw Lineup
The table saw selection separates by blade diameter and mounting style. The SKIL 10-Inch 15-Amp Jobsite Table Saw with Stand provides a 15-amp motor and a folding stand for 4x4 cutting. If you already have bench space, compact models like the SKIL 8-1/4-Inch Compact Jobsite Table Saw offer a 24.5-inch rip capacity at 40 pounds, while the Skil 8-1/4-Inch Worm Drive Table Saw delivers a 25-inch rip capacity.
The rest of the catalog addresses specialized shop tasks and mobile framing. Benchtop machinery like the Skil 9-Inch 2-Speed Benchtop Band Saw suits woodworkers needing controlled curved cuts on fixed surfaces. Handheld worm-drive and cordless circular saws fit jobsite builders who need portable cutting without a stationary fence.
Where the Skil Lineup Fits
Skil covers tasks from small craft cuts to heavy timber framing. The range spans from a 4.17-pound cordless jig saw up to 51.2-pound jobsite table saws. Tool formats include handheld circular saws, benchtop scroll and band saws, a dedicated flooring saw, and portable table saws. Blade diameters reach from 7-1/4 inches to 16-5/16 inches. For cut alignment, only the sliding miter saw includes an LED shadow guide.
Notable gaps exist across the catalog. The lineup lacks full-sized stationary cabinet saws, rip capacities beyond 25 inches, and battery-powered table saws. You also will not find built-in lighting on any table saw.
How to Choose the Right Skil Saw
-
Blade Diameter and Depth
Blade diameter determines how deep the blade cuts into lumber in a single pass. A 10-inch table saw such as the SKIL TS6307-00 provides enough clearance for 4x4 lumber cuts. Saws with 8-1/4-inch blades offer smaller physical profiles but deliver less vertical blade exposure above the table surface. Handheld models in the lineup also scale down to 7-1/4 inches or expand up to 16-5/16 inches. Review the thickest board you intend to process before choosing a blade size for your workspace.
-
Rip Capacity Specifications
Rip capacity measures the maximum distance between the saw blade and the extended rip fence. When processing full 4-foot by 8-foot sheet goods, you need at least 24 inches of rip capacity to cut panels down the center. The SKIL TS6308-00 provides 24.5 inches of rip capacity, which accommodates standard plywood division. Check the published fence distance if your projects involve cabinet panels or wide boards, and verify whether the fence mechanism uses rack-and-pinion gearing for consistent parallel alignment across cuts.
-
Motor Amperage and Voltage
Motor power dictates how smoothly a saw cuts through dense hardwoods without bogging down. Corded benchtop and handheld models across the lineup consistently draw 15 amps, which represents the standard operational ceiling for typical 120-volt household electrical circuits. In contrast, cordless tools like the Skil JS8290B-10 run on the PWR CORE 20V battery platform. If you work continuously at a fixed bench or jobsite location, choose a 15-amp corded motor to ensure steady, uninterrupted torque during heavy cutting tasks.
-
Operating Weight and Transport
Total weight affects how easily you can transport equipment between work locations or lift it onto a workbench. Benchtop and jobsite table saws in this catalog range from 40 pounds to 51.2 pounds. A lighter model like the 40-pound SKIL TS6308-00 eases solo vehicle loading, but heavier frames around 50 pounds provide more planted mass to resist vibration during feeds. Assess how frequently you plan to move the machine versus leaving it stationed on a dedicated shop stand.
-
Single-Pass Cutting Depth
Maximum depth of cut specifies the thickest piece of material the blade can sever in one pass. The Skil SPT99T-01 delivers a 2-5/8-inch cut depth, allowing it to cut through material up to 3x thickness. If your workflow requires slicing through heavy framing timbers or thick dimensional posts, confirm that the blade exposure reaches your lumber dimension. Insufficient cut depth forces you to flip boards over for secondary cuts, which increases measurement errors and slows down production work.
-
Fence and Guide Mechanisms
Accurate ripping depends directly on the fence mechanism attached to the saw table. Models like the Skil 3601-02 use a die-cast aluminum fence configured for flooring materials, while standard jobsite table saws rely on rack-and-pinion alignment rails. Rack-and-pinion gears move both ends of the fence in unison, keeping the guide parallel to the blade without manual adjustment at each end. Inspect the fence locking mechanism to ensure it holds firm under lateral workpiece pressure during long rip passes.
Frequently asked questions
What rip capacity does the Skil TS6308-00 table saw offer?
The SKIL TS6308-00 compact jobsite table saw provides a 24.5-inch rip capacity. This width allows you to break down large sheet materials on job sites. The unit relies on an integrated rack-and-pinion fence system to keep rip adjustments parallel. It runs on a 15-amp motor and weighs 40 pounds, making it suitable for standard workbenches.
Can the Skil SPT99T-01 table saw cut through thick lumber?
Yes, the Skil SPT99T-01 worm drive table saw cuts materials up to 3x thickness. It features a maximum cutting depth of 2-5/8 inches alongside a 25-inch rip capacity. The worm drive gearing delivers high torque for heavy ripping tasks. At 51.2 pounds, this 8-1/4-inch model gives you jobsite mobility without requiring an oversized stationary cabinet.
How much does the Skil TS6307-00 jobsite table saw weigh?
The SKIL TS6307-00 jobsite table saw weighs 51.2 pounds including its integrated folding stand. This weight provides steady support during heavy operations while preserving portability between work areas. Its 15-amp motor powers a 10-inch blade capable of cutting 4x4 material in a single pass. Rack-and-pinion fence rails help maintain accurate alignments during repeated cuts.
Which Skil table saw models feature rack-and-pinion fence systems?
Both the SKIL TS6307-00 10-inch table saw and the TS6308-00 8-1/4-inch compact table saw include rack-and-pinion fence assemblies. This mechanical fence design uses geared tracks to move the fence evenly along the table surface. It prevents fence misalignment when adjusting rip widths for plywood sheets and dimensional boards on jobsite setups.
What is the difference in rip capacity between the Skil TS6308-00 and SPT99T-01?
The SKIL SPT99T-01 offers a 25-inch rip capacity, whereas the TS6308-00 provides a 24.5-inch rip capacity. The SPT99T-01 utilizes a worm drive motor configuration and weighs 51.2 pounds, achieving a 2-5/8-inch cut depth for 3x lumber. The TS6308-00 uses a traditional 15-amp motor setup in a lighter 40-pound housing designed for compact benchtop setups.
What materials can the Skil 3601-02 flooring saw cut?
The Skil 3601-02 flooring saw cuts solid hardwood, engineered wood, and laminate flooring boards. It comes equipped with a 36-tooth blade and a die-cast aluminum fence. The machine executes miter, rip, and cross cuts in a portable 30-pound package. This setup replaces full-sized table saws when you work strictly on dedicated floor installations.
Which Skil saw should you choose for cutting curved profiles?
You should choose the Skil SS9503-00 scroll saw or the JS8290B-10 cordless jig saw for curved profiles. The SS9503-00 benchtop scroll saw weighs 24.7 pounds and features variable speed control for delicate craft woodwork. If you need portable handheld cutting, the PWR CORE 20V brushless jig saw weighs 4.17 pounds and provides angled beveling capability.