Festool Table Saws: 14 Picks Ranked by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best festool table saws means looking at portable track saws, cordless compact units, and stationary workbenches. This guide covers 14 models ranked by their published specifications. The top pick is the Festool TS 55 Plunge Track Saw with 55-Inch Guide Rail, which leads for splinter-free straight cuts in sheet goods. You will also find options like the cordless CSC SYS 50 and the TKS 80 with SawStop. Each selection reflects specific dimensions, weights, and safety features listed on the product pages.
Quick picks
Our 14 picks
Festool TS 55 Plunge Track Saw with 55-Inch Guide Rail
Best for: splinter-free straight cuts in sheet goods
- Dimensions
- 60 × 17 × 13 inches
- Weight
- 22.8 pounds
View on Amazon: Festool TS 55 Plunge Track Saw with 55-Inch Guide Rail
This Festool track saw package includes a plunge-cut saw and a 55-inch guide rail. It cuts from 90° to 47° with an unchanged cutting edge along the rail line. The unit weighs 22.8 pounds and features an integrated riving knife plus an attachable splinter guard. If you break down sheet goods and want straight cuts without a stationary table saw footprint, this setup suits your portable cutting needs.
Pros
- Includes 55-inch guide rail for guided plunge cutting
- Cutting edge line remains unchanged from 90° to 47° bevels
- Equipped with a riving knife for joint alignment and safety
- Attachable splinter guard enables splinter-free cuts on both sides
Cons
- Package length of 60 inches requires dedicated transport space
- Total assembly weight is 22.8 pounds
Good fit if
- You need splinter-free cuts on both faces of a workpiece.
- You make bevel cuts between 90° and 47° along a fixed track.
- You require a riving knife for plunge cutting.
Skip if
- You require a fixed table saw top with a standard rip fence.
- You need a cutting tool shorter than 60 inches for tight spaces.
Verdict: Festool TS 55 Plunge Track Saw with 55-Inch Guide Rail delivers accurate straight and bevel cuts up to 47° with dedicated track guidance and riving knife protection. It serves as a precise alternative to a stationary saw for panel work.
Festool TS 55 Plunge-Cut Track Saw
Best for: splinter-free plunge cuts across varying bevel angles
- Dimensions
- 15.6 × 11.6 × 13.3 inches
- Weight
- 17 pounds
The Festool TS 55 Plunge-Cut Track Saw is a plunge-cut circular saw designed for precise cuts. It weighs 17 pounds and measures 15.6 inches long, 11.6 inches wide, and 13.3 inches high. The tool bevels from 90° to 47° while keeping the cutting edge unchanged. You get an attachable splinter guard for clean cuts on both sides. This tool suits you if you need controlled cuts in a compact handheld format.
Pros
- Cutting edge remains unchanged when beveling from 90° to 47°
- Attachable splinter guard provides clean cuts on both sides
- Concentrated torque increases cutting progress and blade service life
- Compact housing measuring 15.6 by 11.6 by 13.3 inches
Cons
- Guide rail is not included in the box
- Carries a 17-pound tool weight
Good fit if
- You need bevel cuts from 90° to 47° that maintain the same cut line.
- You want splinter-free cuts on both faces using an attachable guard.
- You already own or plan to obtain a guide rail separately.
Skip if
- You require an out-of-the-box setup that includes a guide rail.
- You want a stationary table saw rather than a plunge-cut handheld saw.
Verdict: Festool TS 55 Plunge-Cut Track Saw maintains a constant cutting line across 90° to 47° bevels with dual-side splinter protection. It is a solid choice if you already have or plan to purchase a guide rail.
Festool Plunge-Cut Saw with Scoring Blade
Best for: splinter-free two-sided panel and sheet cutting
- Dimensions
- 15.6 × 11.7 × 17.2 inches
- Weight
- 22 pounds
This plunge-cut saw features an integrated diamond scoring blade designed to give you splinter-free cuts on both sides. It provides a 2-3/8-inch (60 mm) cutting depth and includes KickbackStop technology to lower kickback risk. Compatible with FS and FSK rails, this 22-pound tool suits you if you cut panels and need two-sided splinter-free results on site.
Pros
- Diamond scoring blade provides splinter-free cuts on both sides
- KickbackStop mechanism helps reduce injury risk during plunge cuts
- 2-3/8-inch (60 mm) cutting depth
- Works with FSK cross cutting and FS guide rails
Cons
- Weight of 22 pounds is heavier than standard circular saws
- Maximum cutting depth is capped at 2-3/8 inches
Good fit if
- You require splinter-free cuts on both face and back sides of panels.
- You want KickbackStop protection to reduce kickback during plunge cuts.
- You work with FS guide rails or FSK cross cutting rails.
Skip if
- You need cutting capacity deeper than 2-3/8 inches (60 mm).
- You want a lighter saw than this 22-pound unit.
Verdict: Festool Plunge-Cut Saw with Scoring Blade provides clean double-sided panel cuts with integrated kickback protection. Its 2-3/8-inch depth and rail compatibility offer strong utility for sheet breakdown.
Festool TS 60 Plunge Track Saw
Best for: deep plunge cuts with kickback protection
- Dimensions
- 15.6 × 11.7 × 13.3 inches
- Weight
- 17.4 pounds
This Festool plunge-cut track saw features an EC-TEC motor paired with thin-kerf blade compatibility. Weighing 17.4 pounds with dimensions measuring 15.6 by 11.7 by 13.3 inches, it functions with standard guide rails or FSK cross-cutting guide rails. Integrated KickbackStop reduces kickback risk during cuts. It suits you if you need deeper plunge cuts than the TS 55 F in a portable format.
Pros
- Integrated KickbackStop reduces kickback risk during plunge cuts
- EC-TEC motor works with thin kerf saw blades
- Provides greater cutting depth than the TS 55 F at the same size and weight
- Compatible with both standard guide rails and FSK cross-cutting guide rails
Cons
- Guide rail sold separately
- Total weight is 17.4 pounds
Good fit if
- You need greater cutting depth than the TS 55 F without adding tool bulk.
- You want active KickbackStop technology to limit kickback while plunge-cutting.
- You plan to cut using FSK cross-cutting rails or standard Festool guide rails.
Skip if
- You need an included guide rail in the package.
- You want a saw lighter than 17.4 pounds.
Verdict: Festool TS 60 Plunge Track Saw delivers extended cutting depth and KickbackStop safety in a 17.4-pound package. It pairs with both standard guide tracks and FSK cross-cutting rails.
Festool TS 60 KEB Track Saw with 55-Inch Guide Rail
Best for: guided plunge cuts and sheet breaking
- Dimensions
- 15.6 × 11.7 × 13.3 inches
- Weight
- 23.3 pounds
View on Amazon: Festool TS 60 KEB Track Saw with 55-Inch Guide Rail
This is a plunge-cut track saw bundled with a 55-inch guide rail. It features an EC-TEC motor, a KickbackStop safety function, and an adjustable bevel range from -1° to 47°. Measuring 15.6 by 11.7 by 13.3 inches and weighing 23.3 pounds, it handles straight plunge cuts and pairs with FSK guide rails. It suits you if you need guided sheet cutting without a stationary table.
Pros
- KickbackStop helps reduce kickback during sawing and plunge cuts
- EC-TEC motor works with thin kerf blades for fast cutting
- Bevel cut adjustments range from -1° to 47°
- Includes a 55-inch (1400mm) guide rail in the package
- Compatible with standard guide rails and FSK cross-cutting guide rails
Cons
- Total product weight is 23.3 pounds
- Lacks the fixed rip fence and table surface of a standard table saw
Good fit if
- You need bevel cutting angles between -1° and 47°.
- You want KickbackStop protection while plunge-cutting.
- You need a bundled 55-inch guide rail for straight cuts.
Skip if
- You need a stationary table saw with a traditional rip fence.
- You require rip cuts longer than 55 inches without buying extra rails.
Verdict: Festool TS 60 KEB Track Saw with 55-Inch Guide Rail delivers guided plunge cuts with integrated KickbackStop protection and bevel capabilities up to 47°. It provides an accurate portable alternative to a stationary table saw.
Festool Carvex Cordless Barrel Grip Jigsaw
Best for: portable curve cutting and splinter-free trimming
- Power Source
- Cordless
- Dimensions
- 15.6 × 11.7 × 7.36 inches
This is a cordless barrel-grip jigsaw built for curved and straight cuts. It measures 15.6 inches long by 11.7 inches wide and 7.36 inches high. Key specs include a triple blade guide, stroboscopic lights, and a tool-less base change system. Because it is a bare tool, it suits you if you already own compatible batteries and need portable curved cutting alongside your primary shop saws.
Pros
- Triple blade guide for curved cuts
- Tool-less base change system
- Stroboscopic lights illuminate cutting area
- Splinterguard minimizes tearout
Cons
- Does not include batteries or a charger
- Jigsaw form factor rather than a stationary table saw
Good fit if
- You need a cordless handheld saw for curved cuts.
- You already own compatible batteries and a charger.
- You want splinter-free cuts with tool-free base swaps.
Skip if
- You need a complete kit with battery and charger included.
- You require a stationary table saw for rip cuts.
Verdict: Festool Carvex Cordless Barrel Grip Jigsaw delivers handheld curve cutting with triple blade guidance and tool-less base adjustments. It functions as a portable cutting companion rather than a stationary table saw.
Festool CSC SYS 50 Cordless Table Saw
Best for: compact cordless interior finishing and precision trim
- Rip Capacity
- 11" (280 mm)
- Voltage
- 2x18 V
- Power Source
- Cordless
- Dimensions
- 25.2 × 21 × 16.9 inches
- Weight
- 120 pounds
This Festool cordless table saw runs on a 2x18 V dual-battery system paired with a brushless motor. It fits inside a Systainer footprint, giving you an 11-inch rip capacity and a maximum cutting height of 1-7/8 inches. Digital controls let you set blade height and bevel angles from -10° to 47° to 0.1 millimeters. It suits you if you need compact, battery-powered precision for interior finishing and cross-cuts.
Pros
- 2x18 V cordless operation with brushless EC-TEC motor
- Digital height and bevel adjustment accurate to 0.1 mm (1/256 in)
- Cross-cut capacity up to 17-3/4 inches with sliding table
- Bevel range from -10° to 47° and miter range from -70° to +70°
Cons
- Rip capacity limited to 11 inches
- Maximum cutting height capped at 1-7/8 inches
- Total listed weight is 120 pounds
Good fit if
- You need cordless operation powered by 2x18 V batteries.
- You need digital blade adjustments down to 0.1 mm for fine interior finishing.
- You frequently make wide cross-cuts up to 17-3/4 inches.
Skip if
- You require more than 11 inches of parallel rip capacity.
- You need to cut stock thicker than 1-7/8 inches in a single pass.
Verdict: Festool CSC SYS 50 Cordless Table Saw delivers digital accuracy and dual-battery cordless portability for small-scale shop cuts on jobsites. Its 11-inch rip capacity and 1-7/8-inch depth limit it to trim and interior finishing tasks.
Festool CSC SYS 50 Cordless Table Saw
Best for: precise interior trim and compact cordless cutting
- Rip Capacity
- 11" (280 mm)
- Voltage
- 2x18 V
- Power Source
- Cordless
- Dimensions
- 25.2 × 21 × 16.9 inches
- Weight
- 51.8 pounds
The Festool CSC SYS 50 Cordless Table Saw gives you a portable cutting setup driven by a 2x18 V dual-battery system and a brushless EC-TEC motor. You get an 11-inch rip capacity, a 1-7/8-inch maximum cutting height, and digital height and angle adjustments accurate to 1/256 inch. It suits you if you need precise bevel cuts down to -10 degrees in a compact 51.8-pound footprint.
Pros
- Digital height and angle adjustments accurate to 1/256 inch (0.1 mm)
- Wide bevel capacity from -10° to 47° and miter range from -70° to +70°
- Sliding table supports cross-cut widths up to 17-3/4 inches
- Brushless motor powered by a 2x18 V dual-battery platform
Cons
- Parallel rip capacity is limited to 11 inches
- Maximum vertical cut depth is capped at 1-7/8 inches
- Carries a relatively heavy bare weight of 51.8 pounds
Good fit if
- You need digital cut repeatability down to a tenth of a millimeter.
- You make specialized bevel cuts between -10° and 47° on interior trim.
- You work on cordless jobsites requiring a sliding table design.
Skip if
- You need to rip panels wider than 11 inches.
- You cut stock thicker than 1-7/8 inches.
Verdict: Festool CSC SYS 50 Cordless Table Saw delivers exact digital adjustments and exceptional angle ranges in an integrated cordless package. It trades large rip capacity for tight tolerances on fine interior finishing cuts.
Festool Mobile Saw Table and Work Bench
Best for: supporting and cutting sheet goods on jobsites
- Dimensions
- 45.3 × 9.84 × 27.6 inches
- Weight
- 75 pounds
This unit functions as a mobile cutting table and assembly workbench for your workshop or jobsite. It measures 45.3 inches long, 9.84 inches wide, and 27.6 inches high, giving you a dedicated black work surface for sheet materials. Weighing 75 pounds, it supports panel machining and gluing tasks. You will find it useful if you need portable sheet-material support rather than an integrated standalone motorized table saw.
Pros
- Designed for cutting and machining sheet materials
- Functions as an assembly and gluing workbench
- Setup dimensions of 45.3 by 9.84 by 27.6 inches
- Rated for workshop and construction site use
Cons
- Provides a work support surface without a built-in saw
- Weighs 75 pounds for transport
Good fit if
- You need a mobile table for cutting and gluing sheet materials.
- You want a dedicated workbench for workshop or construction sites.
Skip if
- You want an all-in-one table saw with an integrated motor and blade.
- You need lightweight equipment under 75 pounds.
Verdict: Festool Mobile Saw Table and Work Bench serves as a sturdy 75-pound workstation for cutting sheet goods and assembly work across shops and jobsites. It functions strictly as a support bench rather than a standalone motorized saw.
Festool KAPEX Cordless Sliding Compound Miter Saw
Best for: cordless, wide-angle miter and bevel cutting
- Power Source
- Cordless
- Dimensions
- 29.5 × 21.3 × 19.7 inches
- Weight
- 47.4 pounds
View on Amazon: Festool KAPEX Cordless Sliding Compound Miter Saw
This Festool cordless sliding compound miter saw runs on a brushless EC-TEC motor and a dual-battery system. It offers miter angles up to 60 degrees on each side, bevel cuts up to 46 degrees right and 47 degrees left, and a twin-column guide with two bearings. At 47.4 pounds, it suits you if you need portable, battery-powered crosscutting and angled cuts without an electrical outlet.
Pros
- Dual-battery system paired with a brushless EC-TEC motor
- Wide miter range up to 60° on each side and bevel angles up to 46° right and 47° left
- Twin-column guide with two bearings for precise blade guidance
- Equipped with carrying handles and weighs 47.4 pounds
Cons
- Does not include batteries or a charger
- Requires a large footprint at 29.5 inches long by 21.3 inches wide
Good fit if
- You need miter cuts up to 60° on both left and right sides.
- You already own compatible Festool batteries and a charger.
- You want a cordless brushless miter saw with a dual-bearing guide.
Skip if
- You need a complete kit that includes batteries and a charger in the box.
- You prefer a stationary corded saw that plugs directly into a wall outlet.
Verdict: Festool Cordless KAPEX Sliding Compound Miter Saw delivers broad bevel and miter adjustments using a brushless dual-battery drive. It provides smooth, guided cuts for portable jobsite use once paired with your own batteries.
Festool CSC SYS 50 Cordless Table Saw
Best for: precise interior finishing and compact trim work
- Rip Capacity
- 11" (280 mm)
- Voltage
- 2x18 V
- Power Source
- Cordless
- Dimensions
- 25.2 × 21 × 16.9 inches
- Weight
- 64 pounds
The Festool CSC SYS 50 Cordless Table Saw is a compact, battery-powered jobsite saw designed to fit inside a Systainer. You get a 2x18 V brushless motor system, digital height and angle adjustments accurate to 1/256 inch, and an 11-inch rip capacity. With a 1-7/8-inch cutting height and built-in sliding table, it suits you if you need highly portable precision for interior finishing work.
Pros
- Digital height and bevel adjustments accurate to 1/256 inch (0.1 mm)
- Cordless 2x18 V dual-battery system with brushless EC-TEC motor
- Bevel angles from -10° to 47° and miter cuts from -70° to +70°
- Integrated sliding table supports cross-cuts up to 17-3/4 inches
Cons
- Rip capacity is limited to 11 inches
- Maximum cutting height is capped at 1-7/8 inches
- Total weight is 64 pounds
Good fit if
- You need digital height and angle adjustments accurate to 1/256 inch.
- You cut stock that stays within a 1-7/8-inch thickness.
- You want a cordless saw that includes a sliding table.
Skip if
- You need to rip stock wider than 11 inches.
- You regularly cut materials thicker than 1-7/8 inches.
Verdict: Festool CSC SYS 50 Cordless Table Saw provides digital precision and cordless mobility in a compact format. Its 11-inch rip capacity and 1-7/8-inch cut depth make it tailored for detailed interior work rather than large sheet goods.
Festool TKS 80 Table Saw with SawStop
Best for: deep cuts requiring integrated SawStop safety
- Cutting Depth 90
- 80 mm
- Weight
- 84.7 pounds
This table saw includes integrated SawStop technology for safety when sawing. You get an 80 mm cutting height at 90 degrees to handle large workpieces. The design unfolds to a table height of 900 mm and features an expandable work surface with longitudinal and angle stops. At 84.7 pounds, this tool fits you if you require deep cuts and a standing workspace.
Pros
- 80 mm cutting height at 90 degrees
- Integrated SawStop technology for added safety
- 900 mm unfolded table height
- Expandable work surface with longitudinal and angle stops
Cons
- 84.7-pound weight makes one-person transport heavy
- Bevel cut depth at 45 degrees not specified
- Rip capacity dimensions not listed
Good fit if
- You need an 80 mm cutting height at 90 degrees for thick stock.
- You want integrated SawStop safety technology on your saw.
- You prefer a 900 mm working height when unfolded.
Skip if
- You need a lightweight benchtop saw under 80 pounds.
- You require explicit 45-degree bevel depth specifications.
Verdict: Festool TKS 80 Table Saw with SawStop provides an 80 mm cutting height and built-in safety technology for large workpieces. Its 900 mm working height and expandable surface support demanding cutting tasks.
Festool PRECISIO Pull-Action Table Saw
Best for: precise bevel cuts and compact folding storage
- Cutting Depth 90
- 0 - 52 mm
- Height
- 0.08 inches
- Weight
- 50.7 pounds
Festool PRECISIO Pull-Action Table Saw gives you a pull-action cutting setup weighing 50.7 pounds. You get a cutting height between 0 and 52 mm at 90 degrees, dropping to 0 to 37 mm at 45 degrees. The blade bevel ranges from -2 to 47 degrees for undercut capability. When folded down, the table stands 316.00 mm high. It suits woodworkers needing precise crosscuts and rip cuts with integrated splinter protection.
Pros
- FastFix tool-free blade change mechanism
- Cutting depth up to 52 mm at 90° and 37 mm at 45°
- Bevel tilt range spans from -2° to 47°
- Folded table height measures 316.00 mm
- Movable splinter guard supports low-tear cuts on both sides
Cons
- Maximum cutting depth tops out at 52 mm
- Total unit weight is 50.7 pounds
Good fit if
- You need bevel cuts extending past standard angles from -2° to 47°.
- You want tool-free blade swaps using the FastFix system.
- You make crosscuts and rip cuts using an all-round V-groove angle stop.
Skip if
- You need a cutting capacity thicker than 52 mm.
- You want a portable saw lighter than 50.7 pounds.
Verdict: Festool PRECISIO Pull-Action Table Saw delivers controlled cuts up to 52 mm deep with extended bevel adjustment. It provides versatile multi-function pull operation and folds down to a 316.00 mm profile.
Festool Sliding Compound Miter Saw with Dual Lasers
Best for: precise beveling and laser-guided crosscuts
- Dimensions
- 29.4 × 22.8 × 19.8 inches
- Weight
- 57.3 pounds
View on Amazon: Festool Sliding Compound Miter Saw with Dual Lasers
This sliding compound miter saw features a rail-forward design and dual lasers for left and right cut alignment. Measuring 29.4 inches long, 22.8 inches wide, and weighing 57.3 pounds, it provides up-front rotary micro-bevel adjustments and up to 91 percent dust extraction using a 36-millimeter hose. You will find it suits detailed cutting and trim tasks where you need fine bevel pointers, laser-guided targeting, and clean dust collection.
Pros
- Dual lasers mark cut boundaries on left and right sides
- Rail-forward design maintains compact footprint and eliminates head play
- Micro-adjustable bevel knob positioned up front with fine pointers
- Captures up to 91% of dust with pivoting 36 mm hose connector
Cons
- Heavy 57.3-pound weight limits everyday portability
- Large physical footprint measuring 29.4 by 22.8 inches
- Miter saw configuration cannot perform table saw rip cuts
Good fit if
- You need dual-laser guidance to track cut lines on both sides.
- You require precise micro-bevel settings using front-mounted controls.
- You prioritize dust management capable of capturing up to 91% of waste.
Skip if
- You need a lightweight machine under 50 pounds for frequent transit.
- You require a traditional table saw for wide ripping operations.
Verdict: Festool KAPEX Sliding Compound Miter Saw delivers precise dual-laser alignment and fine micro-bevel adjustments in a rail-forward chassis. Its 57.3-pound build and 91% dust capture rate make it a dedicated precision crosscutting tool.
Specifications side by side
| Spec | Festool TS 55 Plunge Track Saw with 55-Inch Guide Rail | Festool TS 55 Plunge-Cut Track Saw | Festool Plunge-Cut Saw with Scoring Blade | Festool TS 60 Plunge Track Saw | Festool TS 60 KEB Track Saw with 55-Inch Guide Rail | Festool Carvex Cordless Barrel Grip Jigsaw | Festool CSC SYS 50 Cordless Table Saw | Festool CSC SYS 50 Cordless Table Saw | Festool Mobile Saw Table and Work Bench | Festool KAPEX Cordless Sliding Compound Miter Saw | Festool CSC SYS 50 Cordless Table Saw | Festool TKS 80 Table Saw with SawStop | Festool PRECISIO Pull-Action Table Saw | Festool Sliding Compound Miter Saw with Dual Lasers |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Rip Capacity | not specified | not specified | not specified | not specified | not specified | not specified | 11" (280 mm) | 11" (280 mm) | not specified | not specified | 11" (280 mm) | not specified | not specified | not specified |
| Cutting Depth 90 | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 80 mm | 0 - 52 mm | not specified |
| Voltage | not specified | not specified | not specified | not specified | not specified | not specified | 2x18 V | 2x18 V | not specified | not specified | 2x18 V | not specified | not specified | not specified |
| Power Source | not specified | not specified | not specified | not specified | not specified | Cordless | Cordless | Cordless | not specified | Cordless | Cordless | not specified | not specified | not specified |
| Dimensions | 60 × 17 × 13 inches | 15.6 × 11.6 × 13.3 inches | 15.6 × 11.7 × 17.2 inches | 15.6 × 11.7 × 13.3 inches | 15.6 × 11.7 × 13.3 inches | 15.6 × 11.7 × 7.36 inches | 25.2 × 21 × 16.9 inches | 25.2 × 21 × 16.9 inches | 45.3 × 9.84 × 27.6 inches | 29.5 × 21.3 × 19.7 inches | 25.2 × 21 × 16.9 inches | not specified | not specified | 29.4 × 22.8 × 19.8 inches |
| Weight | 22.8 pounds | 17 pounds | 22 pounds | 17.4 pounds | 23.3 pounds | not specified | 120 pounds | 51.8 pounds | 75 pounds | 47.4 pounds | 64 pounds | 84.7 pounds | 50.7 pounds | 57.3 pounds |
| Height | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 0.08 inches | not specified |
| Color | White | Multicolor | White | White | White | not specified | Black | Black | Black | Multicolor | White | Tks 80 Ebs | not specified | Multicolor |
| Model | 576708+491498 | 576708 | 576735 | 576726 | 576726+491498 | 576522 | 576821+577001+577079 | 576821 | 205183 | 576848 | 578621+577079 | 575781 | 574772 | 575306 |
| Size | not specified | not specified | not specified | 20 | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | PRECISIO CS 50 EBG-Set | not specified |
Festool Table Saw Specs Compared
This lineup spans portable track saws to compact cordless units. The Festool TS 55 Plunge Track Saw with 55-Inch Guide Rail offers a 60-inch length for panel work. For deeper cuts, the Festool TS 60 Plunge Track Saw provides extended depth and KickbackStop safety. These tools prioritize guide rail compatibility and bevel angles over stationary rip capacity. You should choose these if you need splinter-free straight cuts on sheet goods without a fixed cabinet. The Festool CSC SYS 50 Cordless Table Saw delivers 11-inch rip capacity in a 51.8-pound package. It trades large capacity for digital precision in interior finishing. Shoppers seeking compact trim work will find this model suitable. Other options like the Festool PRECISIO Pull-Action Table Saw fold for storage. Compare weight and dimensions to match your jobsite constraints.
Where Festool Fits Your Shop
Festool covers portable track saws, cordless table units, and stationary benches. The range spans from 17-pound handheld track saws to 120-pound cordless table saws. You get plunge cuts, pull-action precision, and sliding miter options. However, the lineup lacks a dedicated heavy-duty stationary table saw for large sheet goods. The cordless table saws limit rip capacity to 11 inches. There are no corded table saws in this selection. You must choose between portable track guides or compact cordless workstations for most tasks.
If you also need outdoor heating, you can compare burner output and clearance dimensions for the best table fire tables.
How to Choose Your Festool Saw
-
Check Cutting Depth Needs
Your material thickness determines the required blade depth. The Festool TS 60 models offer deeper plunge cuts than the TS 55 series, which is vital for thick hardwoods or stacked laminates. If you only cut standard sheet goods, the shallower depth of the TS 55 is sufficient. Match the spec to your thickest regular project to avoid buying unnecessary power or capacity.
-
Verify Rip Capacity
Rip capacity defines how wide a board you can cut in a single pass. The Festool CSC SYS 50 provides an 11-inch rip capacity, ideal for trim and interior finishing. This is narrower than traditional stationary saws. If you need to rip wide panels, this compact unit may limit your workflow. Check this spec before committing to a cordless table saw for large sheet goods.
-
Assess Weight and Portability
Weight impacts how easily you transport the tool to jobsites. The Festool TS 55 Plunge-Cut Track Saw weighs 17 pounds, making it easy to carry. In contrast, the CSC SYS 50 Cordless Table Saw can weigh up to 120 pounds, requiring more effort to move. Choose a lighter model if you frequently set up and tear down at different locations.
-
Consider Power Source
Power source affects where you can work. The Festool Carvex and CSC SYS 50 are cordless, offering freedom from outlets on remote jobsites. The TS 55 and TS 60 require a power cord. Decide if you need battery mobility for outdoor work or prefer the consistent power of a corded tool for stationary shop use. Match the source to your typical work environment.
-
Evaluate Safety Features
Safety specs protect you during operation. The Festool TS 60 KEB includes integrated KickbackStop protection, which reacts quickly to dangerous kickback events. The TS 55 models use dedicated track guidance for stability. The TKS 80 pairs with SawStop technology for advanced injury prevention. Prioritize these specs if you frequently cut dense materials or work alone without immediate assistance.
Frequently asked questions
Which Festool saw is best for cutting sheet goods?
The Festool TS 55 Plunge Track Saw with 55-Inch Guide Rail is the top pick for splinter-free straight cuts in sheet goods. It delivers accurate straight and bevel cuts up to 47° with dedicated track guidance. This setup serves as a precise alternative to a stationary saw for panel work, ensuring clean edges on large materials.
Does Festool make a cordless table saw?
Yes, the Festool CSC SYS 50 Cordless Table Saw is a compact unit designed for interior finishing and precision trim. It features digital accuracy and dual-battery portability. With an 11-inch rip capacity and a 1-7/8-inch depth limit, it trades large rip capacity for tight tolerances on fine interior finishing cuts rather than handling large sheet goods.
What is the difference between the TS 55 and TS 60?
The Festool TS 60 Plunge Track Saw delivers extended cutting depth compared to the TS 55 series. It also includes KickbackStop safety technology in a 17.4-pound package. Both models pair with standard guide tracks, but the TS 60 offers deeper plunge cuts and enhanced safety features for more demanding cutting tasks on thicker materials.
Can I use Festool saws for curved cuts?
The Festool Carvex Cordless Barrel Grip Jigsaw handles portable curve cutting and splinter-free trimming. It delivers handheld curve cutting with triple blade guidance and tool-less base adjustments. While it functions as a portable cutting companion rather than a stationary table saw, it provides the flexibility needed for intricate shapes and detailed trimming work on various projects.
Is there a stationary option with safety features?
The Festool TKS 80 Table Saw with SawStop provides an 80 mm cutting height and built-in safety technology for large workpieces. Its 900 mm working height and expandable surface support demanding cutting tasks. This model integrates SawStop safety mechanisms to protect users during deep cuts, making it suitable for handling large workpieces with enhanced security.
What is the Festool Mobile Saw Table used for?
The Festool Mobile Saw Table and Work Bench serves as a sturdy 75-pound workstation for cutting sheet goods and assembly work. It functions strictly as a support bench rather than a standalone motorized saw. This mobile platform provides a stable surface for cross-shop and jobsite use, allowing you to set up your saw for efficient panel breakdown.
Which saw is best for precise bevel cuts?
The Festool PRECISIO Pull-Action Table Saw delivers controlled cuts up to 52 mm deep with extended bevel adjustment. It provides versatile multi-function pull operation and folds down to a 316.00 mm profile for storage. This design allows for precise bevel cuts and compact folding storage, making it ideal for tasks requiring exact angles and limited workspace.