WEN vs DOVAMAN: Table Saws Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This WEN vs DOVAMAN table saw comparison highlights two distinct tools. You might expect them to be similar, but they serve different purposes. The WEN model is a band saw, while the DOVAMAN is a sliding miter saw. Both are benchtop units designed for workshop use. The main difference lies in their cutting style and power. One focuses on curved and deep cuts, while the other handles crosscuts and miters with high speed.
Key differences
| Aspect | WEN 9-Inch Benchtop Band Saw | DOVAMAN 10-Inch 2-Speed Sliding Miter Saw |
|---|---|---|
| Tool Type | Band Saw | Sliding Miter Saw |
| Blade Diameter | Uses 59-1/2-inch blades | 10-Inch |
| Amperage | 2.8-Amp | 15 Amp |
| No-Load Speed | 2500 feet per minute | 5000RPM and 3200RPM |
| Weight | 40 pounds | 37.5 pounds |
Which one should you choose?
Choose WEN 9-Inch Benchtop Band Saw if
- You need to make curved cuts or resaw thick lumber up to 3-1/2 inches deep.
- You prefer a lighter duty motor for detailed woodworking projects.
- You want a tool that includes a rip fence and miter gauge for guided cuts.
Choose DOVAMAN 10-Inch 2-Speed Sliding Miter Saw if
- You require high-speed cutting for wood, PVC, or soft metals.
- You need to cut wide boards up to 13 inches using the sliding rail.
- You value a dual-speed setting for precision and power control.
Verdict: The WEN band saw is the better choice for specialized tasks like resawing or intricate curves. The DOVAMAN miter saw is superior for general crosscutting and miter work with its powerful 15-amp motor. Choose based on whether you need vertical depth or horizontal sliding capacity.
WEN vs DOVAMAN Spec Showdown
Motor power
The DOVAMAN features a 15-amp pure copper motor, delivering significantly higher electrical draw than the WEN model. The WEN uses a 2.8-amp motor. Higher amperage generally indicates greater cutting torque and the ability to handle denser materials without bogging down. For heavy-duty tasks, the DOVAMAN’s 15-amp rating offers a clear performance advantage. The WEN’s lower amperage suits lighter, precision work but lacks the raw power for thick stock. You should choose based on your typical material thickness and cut volume.
Blade size
Blade diameter affects cut capacity and versatility. The DOVAMAN accepts a 10-inch blade, which is standard for miter saws and allows for wider crosscuts. The WEN uses 59-1/2-inch band saw blades, which are measured by length, not diameter. Comparing diameters directly is difficult because these are different tool types. However, the 10-inch blade on the DOVAMAN provides a larger cutting surface area for standard woodworking tasks. The WEN’s band blade length allows for deep resawing capabilities that the miter saw cannot match. Each excels in its specific geometry.
No-load speed
Speed settings impact cut quality and material compatibility. The DOVAMAN offers dual-speed operation at 5000 RPM and 3200 RPM. This allows you to switch between high speed for wood and lower speed for PVC or soft metals to prevent melting. The WEN operates at a fixed 2500 feet per minute blade speed. While efficient for band sawing, it lacks the adjustable RPM flexibility of the DOVAMAN. If you cut multiple materials, the DOVAMAN’s variable speed is a practical benefit. The WEN is optimized for a single cutting method.
Cutting capacity
Capacity defines the largest piece you can cut. The DOVAMAN has an extended cutting range up to 4 x 13 inches due to its sliding rails. This accommodates wide boards and large projects. The WEN can create cuts up to 3-1/2 inches deep and 9 inches wide. While the WEN’s 9-inch width is respectable, the DOVAMAN’s 13-inch sliding capacity is superior for wide lumber. If you frequently work with wide stock, the DOVAMAN provides more room. The WEN is better suited for narrower or thicker resawing tasks.
Weight
Portability matters if you move your tools often. The WEN weighs 40 pounds. The DOVAMAN weighs 37.5 pounds. The difference is only 2.5 pounds, which is negligible in practical handling. Both units are benchtop models designed to sit on a workbench. Neither is ultralight, but both are manageable for one person to lift. The DOVAMAN is slightly lighter, but you will not notice a significant difference in stability or ease of transport. This round is a tie for most users.
Table size
Table dimensions affect workpiece support. The WEN has a spacious table measuring 12-1/4 x 11-7/8 inches. It also bevels up to 45 degrees for angled cuts. The DOVAMAN includes extendable side tables and sliding rails, effectively increasing the support area beyond the base. The DOVAMAN’s design accommodates larger materials better than the fixed WEN table. If you need to support wide boards during crosscuts, the DOVAMAN’s extended setup is more functional. The WEN’s table is adequate for smaller, precise band sawing tasks.
Choose the Right Saw for Your Needs
You need versatile material cutting
The DOVAMAN handles wood, PVC, and soft metals with its dual-speed motor. You get 5000 RPM for fast cuts or 3200 RPM for precision. The 15-amp motor provides ample power for these tasks. Its sliding rail allows you to cut wider boards up to 13 inches. This flexibility makes it ideal for multi-material projects.
You require curved or deep cuts
The WEN is a band saw, not a miter saw. It creates cuts up to 3-1/2 inches deep and 9 inches wide. You can use blades from 1/8 to 3/8 inches for detailed work. The 2.8-amp motor rotates blades up to 2500 feet per minute. This tool is designed for intricate shapes and resawing tasks that a miter saw cannot perform.
You want a compact, portable unit
The WEN benchtop band saw weighs 40 pounds and measures 11 inches in length. It is slightly heavier but more compact in footprint than the DOVAMAN. The DOVAMAN is 34 inches long. If your workspace is tight, the WEN’s smaller dimensions might fit better. Its 12-1/4 inch work table offers stable support for smaller projects.
The products compared
WEN 9-Inch Benchtop Band Saw
Best for: small workshop curve cutting
- Amperage
- 2.8-Amp
- Dimensions
- 11 × 7 × 4 inches
- Weight
- 40 pounds
View on Amazon: WEN 9-Inch Benchtop Band Saw Affiliate link
This WEN benchtop band saw features a 2.8-amp motor that rotates the blade up to 2500 feet per minute. It handles cuts up to 3-1/2 inches deep and 9 inches wide. The work table measures 12-1/4 by 11-7/8 inches and bevels up to 45 degrees. You should consider this tool if you need a compact saw for smaller projects. It weighs 40 pounds and fits well in limited workspace areas.
Pros
- 2.8-amp motor reaches 2500 feet per minute
- Cuts up to 3-1/2 inches deep and 9 inches wide
- Table bevels up to 45 degrees
- Includes rip fence and miter gauge
Cons
- 2-year warranty is shorter than typical industry standards
- 9-inch blade width limits wide stock capacity
- Benchtop design may vibrate on lighter workbenches
Good fit if
- You need a compact saw for small workshops
- You primarily cut curves or narrow stock
- You want a portable unit under 50 pounds
Skip if
- You frequently cut material wider than 9 inches
- You require a heavy-duty industrial duty cycle
- You need a 10-inch or larger blade capacity
Verdict: WEN 9-Inch 2.8-Amp Benchtop Band Saw suits hobbyists who need a compact tool for detailed cuts. It fits users with limited space who do not require wide stock capacity.
DOVAMAN 10-Inch 2-Speed Sliding Miter Saw
Best for: Multi-material cutting with a wide sliding range
- Blade Diameter
- 10"
- Amperage
- 15 A
- No-Load Speed
- 5000 RPM, 3200 RPM
- Feed Speed
- 2-Speed
- Dimensions
- 34 × 20 × 15 inches
- Weight
- 37.5 pounds
View on Amazon: DOVAMAN 10-Inch 2-Speed Sliding Miter Saw Affiliate link
This DOVAMAN model is a 10-inch sliding miter saw with a 15-amp motor. It features dual-speed settings of 5000RPM and 3200RPM for cutting wood, PVC, and soft metals. The 13-inch sliding rail and extendable side tables allow a cutting range up to 4 x 13 inches. A built-in laser guide aids precision. It weighs 37.5 pounds and measures 34 inches long.
Pros
- 15-amp pure copper motor for high efficiency
- Dual-speed settings at 5000RPM and 3200RPM
- 13-inch sliding rail with 4 x 13-inch cutting capacity
- Built-in laser guide for precise cuts
- Ambidextrous design for left and right-handed use
Cons
- Limited to soft metals and non-ferrous materials
- No mention of dust collection port
- Heavier at 37.5 pounds than some benchtop saws
Good fit if
- You need to cut PVC or soft metals alongside wood
- You require a wide cutting capacity for larger stock
- You prefer an ambidextrous tool layout
Skip if
- You primarily cut hardwoods or metals requiring high RPM
- You need a dedicated table saw for rip cuts
- You require a lightweight tool under 30 pounds
Verdict: DOVAMAN 10-Inch Sliding Miter Saw offers versatile multi-material cutting with dual speeds and a generous sliding range. It fits users who frequently work with PVC or soft metals and need a wide cutting capacity for larger projects.
Specifications side by side
| Spec | WEN 9-Inch Benchtop Band Saw | DOVAMAN 10-Inch 2-Speed Sliding Miter Saw |
|---|---|---|
| Blade Diameter | not stated | 10" |
| Amperage | 2.8-Amp | 15 A |
| No-Load Speed | not stated | 5000 RPM, 3200 RPM |
| Feed Speed | not stated | 2-Speed |
| Dimensions | 11 × 7 × 4 inches | 34 × 20 × 15 inches |
| Weight | 40 pounds | 37.5 pounds |
| Size | 59-1/2-inch blades | 10 Inch |
| Color | Black, Silver | A-black |
| Model | BA3959 | DMS01A |
Frequently asked questions
Is the WEN a table saw?
No. The WEN model listed is a 9-inch benchtop band saw. It uses a 59-1/2-inch blade for cutting curves. It is not a table saw. You cannot use it for straight crosscuts or rip cuts like a table saw. It is designed for detailed curve cutting in small workshops.
Is the DOVAMAN a table saw?
No. The DOVAMAN model is a 10-inch sliding miter saw. It features a 15-amp motor and dual speeds. It is designed for angled and crosscuts. It is not a table saw. You cannot feed wood through it from the side like a table saw. It sits on a benchtop.
Which is better for cutting curves?
The WEN is better for curves. It is a band saw with a 7-inch width capacity. This allows you to cut intricate shapes. The DOVAMAN is a miter saw. It only makes straight, angled cuts. It cannot follow curved lines. Choose the WEN for detailed woodworking curves.
Which is better for cutting PVC?
The DOVAMAN is better for PVC. It has a 15-amp motor and dual speeds. You can use 3200 RPM for precision cutting. This speed helps prevent melting the plastic. The WEN is a band saw. It is not designed for cutting PVC pipes or sheets. Use the DOVAMAN for this task.
How heavy is the WEN band saw?
The WEN band saw weighs 40 pounds. It measures 11 inches long, 7 inches wide, and 4 inches high. This makes it a compact unit. It fits in small spaces. It is heavier than the DOVAMAN. You need a sturdy bench to support its weight during operation.
How heavy is the DOVAMAN miter saw?
The DOVAMAN miter saw weighs 37.5 pounds. It is slightly lighter than the WEN. It measures 34 inches long, 20 inches wide, and 15 inches high. The sliding feature requires more length. Place it on a solid surface. Ensure your bench can handle the weight and vibration during use.