Shop Fox W1875—2 HP Benchtop Table Saw Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This shop fox w1875 2 hp benchtop table saw review covers a robust tool designed for serious cutting. The Shop Fox W1875 is a 10-inch benchtop saw that comes with a dedicated stand. It is defined by its 2 HP motor and its 120V power requirement. These two specs set the foundation for its performance capabilities. The unit weighs 70 pounds and measures 64 inches in length. It offers a maximum depth of cut of 3-1/2 inches at 90 degrees. This guide explains how these numbers translate to your workshop workflow.
What stands out
- 2 HP motor for strong cutting power
- 120V single-phase electrical requirement
- 3-1/2 inch maximum depth of cut at 90 degrees
- Includes a 10-inch carbide-tipped blade
- Right-tilting blade mechanism with 0-45 degree range
Who it fits
Good fit for
This saw suits woodworkers who need high power in a portable format. The 2 HP motor handles thick stock well, thanks to the 3-1/2 inch cutting depth. You will appreciate the included stand, which sets the table height to 36-1/2 inches. This is ideal for users who want a dedicated station without permanent installation. The 120V operation means it works with standard household outlets. It is a good fit for those who value raw cutting capacity over compact storage.
Who should skip it
Look elsewhere if you need left-tilting capability. This model only tilts right, which limits some crosscut precision tasks. If you require a 45-degree depth greater than 2-1/2 inches, this unit falls short. The 120V power draw may not suit all job sites with limited circuits. You should also skip this if you prefer a lightweight, easily transportable tool. At 70 pounds with the stand attached, it is not designed for frequent moving between locations.
Verdict: The Shop Fox W1875 delivers serious power and depth in a standalone package. It is a solid choice for those prioritizing cutting capacity and stable height.
Key specs explained
Motor: 2 HP
This horsepower rating indicates the motor's power output. You get strong torque for cutting through dense hardwoods or thick stock without bogging down. A 2 HP motor is standard for serious benchtop saws. It handles demanding tasks better than lower-rated units, ensuring smoother cuts and less strain on the machine during heavy use.
Voltage: 120V
This saw operates on standard household current. You can plug it into any regular outlet without needing special electrical work or expensive adapters. This makes it accessible for most home workshops. It simplifies setup and allows you to move the saw easily to different locations within your shop or garage without worrying about power availability.
Blade Diameter: 10"
The blade size determines the maximum width of material you can cut. A 10-inch blade is the industry standard for benchtop saws. It balances cutting capacity with a compact footprint. This size allows you to rip wide boards while keeping the overall machine small enough to fit on a workbench or stand in tighter spaces.
Cutting Depth 90: 3-1/2"
This spec shows how deep the blade cuts at a standard 90-degree angle. A 3-1/2-inch depth is exceptional for a benchtop saw. Most competitors offer only around 3 inches. This extra depth lets you cut through thicker lumber, like 4x4 posts, in a single pass, saving you time and effort on large projects.
Table Height from Floor: 36-1/2"
This measurement indicates the working height of the saw table. At 36.5 inches, it is slightly lower than the standard 36 inches. You may need to adjust your stance or use a different stool for comfort. This height affects your posture during long cutting sessions, so consider how it fits your personal workflow and shop layout.
Design and build details
The Shop Fox W1875 is a benchtop table saw designed for stability and portability. It features a dedicated stand that raises the table height to 36-1/2 inches. This elevation reduces bending for many users. The overall dimensions are 64 inches in length, 40.3 inches in width, and 34.8 inches in height. You should account for this footprint in your workshop layout.
The unit weighs 70 pounds. This mass provides a stable base during cuts, reducing vibration compared to lighter models. The finish is black. The listing states it includes a 10-inch carbide-tipped blade. This blade is ready for immediate use. The saw operates on 120V power. This standard household voltage allows you to use it in most garages or shops without special wiring.
The table tilts to the right, ranging from 0 to 45 degrees. This right-hand tilt is common for benchtop saws. The maximum depth of cut is 3-1/2 inches at 90 degrees. At 45 degrees, the depth is 2-1/2 inches. These specs indicate it handles standard lumber and sheet goods well. The design prioritizes a compact footprint without sacrificing cutting capacity. You get a sturdy tool that fits in smaller spaces. The included stand makes setup straightforward. You can move it when needed, though the weight helps keep it steady while working.
Setup and everyday use
The W1875 arrives with a dedicated stand, which simplifies the initial assembly process. You do not need to build a separate workbench or find compatible legs. The stand raises the table surface to 36-1/2 inches from the floor. This height is ergonomic for most users, reducing the need to hunch over the machine. The entire unit weighs 70 pounds. This weight provides stability during operation but allows you to move it if needed. The overall footprint is 64 inches long by 40.3 inches wide. You should ensure you have adequate floor space for this size.
Powering the saw requires a standard 120V outlet. You do not need specialized electrical infrastructure. The 2 HP motor delivers consistent torque for daily tasks. You can cut through dense hardwoods or thick stock without the motor slowing down. The included 10-inch carbide-tipped blade is ready for immediate use. This saves you the step of purchasing a separate blade before your first cut.
In daily use, the saw offers a maximum depth of cut of 3-1/2 inches at 90 degrees. This capacity handles most standard lumber and sheet goods. The blade tilts to the right, allowing for bevel cuts up to 45 degrees. This range covers typical joinery and angled projects. The black finish resists minor scratches from routine workshop activity. You get a reliable tool that combines benchtop convenience with sufficient power for serious projects.
Before You Buy This Saw
Owning this benchtop saw requires a few practical preparations. First, verify your workshop has a standard 120V outlet. The motor draws significant power, so ensure your circuit can handle the load without tripping. You will also need to check your blade compatibility. The unit includes a 10-inch carbide-tipped blade, but you may want to upgrade for specific materials. Regular upkeep involves keeping the rail clean. Dust buildup affects accuracy, so wipe the surface after each use. This model fits well alongside other options in Table Saws if you prioritize portability. It is lighter than cabinet saws but offers more power than basic contractor models. The included stand provides stability, yet you should still secure it during heavy cuts. Consider your storage space too. At 70 pounds, it is manageable, but the stand adds bulk. Plan your layout carefully to accommodate its 64-inch length. This saw suits those who need a powerful, mobile tool for varied projects.
Check before you buy
- Check your workshop has a 120V outlet.
- Verify your circuit can handle the 2 HP motor.
- Ensure you have space for the 64-inch stand.
- Plan for regular rail cleaning to maintain accuracy.
The product at a glance
Shop Fox 10-Inch Benchtop Table Saw with Stand
Best for: Deep cuts and portable heavy-duty work
- Blade Diameter
- 10"
- Horsepower
- 2 HP
- Cutting Depth 90
- 3-1/2"
- Voltage
- 120V
- Dimensions
- 64 × 40.3 × 34.8 inches
- Weight
- 70 pounds
View on Amazon: Shop Fox 10-Inch Benchtop Table Saw with Stand Affiliate link
The Shop Fox W1875 is a 2 HP benchtop table saw with a 120V motor. It reaches 3-1/2" depth at 90° and 2-1/2" at 45°. The unit includes a 10" carbide-tipped blade and stands 36-1/2" tall from the floor. This setup suits users needing deep cuts in a portable format. It fits workshops where space is limited but power is required for thicker stock.
Pros
- 2 HP motor provides strong cutting power
- 3-1/2" maximum depth of cut at 90°
- Includes 10" carbide-tipped blade
- Stands 36-1/2" tall from the floor
Cons
- Limited to 120V power supply
- Blade tilt only goes right, 0-45°
- Heavy at 70 pounds
Good fit if
- You need a 2 HP motor for thick stock
- You require a 3-1/2" cut depth at 90°
- You want a ready-to-use saw with a blade included
Skip if
- You need a 240V motor for higher efficiency
- You require left-side blade tilt for better visibility
- You prefer a lighter unit under 50 pounds
Verdict: Shop Fox W1875 2 HP Benchtop Saw delivers robust 2 HP power and deep 3-1/2" cuts, making it ideal for users who need heavy-duty performance in a benchtop format without needing left-side tilt.
Specifications side by side
| Spec | Shop Fox 10-Inch Benchtop Table Saw with Stand |
|---|---|
| Blade Diameter | 10" |
| Horsepower | 2 HP |
| Cutting Depth 90 | 3-1/2" |
| Voltage | 120V |
| Dimensions | 64 × 40.3 × 34.8 inches |
| Weight | 70 pounds |
| Color | Black |
| Model | W1875 |
Frequently asked questions
How heavy is the Shop Fox W1875 with its stand?
The unit weighs 70 pounds. This weight provides stability during heavy cuts but requires effort to move. The included stand adds bulk, so plan your workshop layout carefully. You will need a clear path to transport it if you change locations frequently.
What are the overall dimensions of the Saw with the stand?
The saw measures 64 inches in length, 40.3 inches in width, and 34.8 inches in height. These dimensions fit in most standard garages. Ensure you have enough floor space for the extended footprint. The height allows for comfortable standing work without excessive bending.
Does this saw cut deep enough for thick lumber?
Yes, it offers a cutting depth of 3-1/2 inches. This depth handles thick hardwoods and dense materials effectively. The 2 HP motor supports these deep cuts without stalling. You can tackle large stock pieces that smaller benchtop saws cannot manage.
Is the Shop Fox W1875 suitable for left-handed users?
No, this model does not feature left-side tilt. The blade tilts to the right side only. If you prefer left-side tilt for better visibility or chip ejection, this saw may not fit your needs. Right-tilt designs are common in this class.
What voltage does the Shop Fox W1875 require?
It requires a standard 120V power outlet. You do not need specialized industrial wiring. This makes it accessible for home workshops. Just ensure your circuit can handle the 2 HP motor load to prevent tripping breakers during heavy use.
Who is this benchtop saw best for?
It is ideal for users needing heavy-duty performance in a portable format. The 2 HP motor and deep cut capacity suit serious woodworkers. It fits those who want robust power without a stationary cabinet saw. It is less suitable for those requiring left-side tilt.
Does the package include a stand?
Yes, the Shop Fox W1875 comes with a dedicated stand. You do not need to build or buy separate legs. The stand raises the table to a comfortable working height. This simplifies setup and ensures immediate usability upon assembly.