DEWALT 20V MAX Jig Saw Alternatives: 6 Similar Picks Compared

Comparing DEWALT 20V Jig Saw Alternatives

DEWALT 20V MAX Cordless 7-1/4-Inch Circular Saw

The DEWALT DCS590B circular saw trades the tight curved cutting agility of the DCS335B jig saw for sheer speed and depth on straight cuts. It runs a 7-1/4-inch blade at 5,500 RPM, slicing up to 2-9/16 inches deep into framing lumber. In contrast, the DCS335B weighs 4.76 pounds and focuses on detailed curved patterns and scrollwork. The circular saw weighs 9.88 pounds and measures 15.4 inches long, making it heavier and bulkier to guide. You lose the keyless bevel detents and compact maneuverability of the barrel grip tool. Pick this circular saw if you break down plywood sheets or rip framing timber instead of following detailed interior curves.

Baikemon 8-1/4-Inch Cordless Sliding Miter Saw

The Baikemon BM10A sliding miter saw offers rigid stationary crosscutting on the same 20V platform. Its 8-1/4-inch blade handles wide crosscuts and fixed miter angles across boards with precision that freehand cutting cannot replicate. However, you sacrifice total portability and curve cutting. At 27 pounds and 31 inches in length, this tool requires dedicated bench space, whereas the 4.76-pound DCS335B jig saw measures 11.5 inches long and fits easily inside a tool bag. You cannot use the miter saw for sink cutouts, internal openings, or contour tracing. Choose the Baikemon miter saw if your primary cuts involve repetitive, square chops or angled trim pieces across wide boards.

DEWALT 20V MAX Cordless Brushless Jig Saw

The DEWALT DCS334B provides a traditional top-handle design that contrasts with the barrel grip on the DCS335B. At 4.2 pounds, the DCS334B is slightly lighter than the 4.76-pound DCS335B. It also has a more compact footprint, measuring 8.25 inches long and 1.75 inches wide compared to the DCS335B at 11.5 inches long and 3.75 inches wide. Both units share the 20V MAX cordless platform and brushless motor efficiency for curved wood cutting. However, the top handle places your hand higher above the cut, giving you less direct low-profile leverage than a barrel body. Choose the DCS334B if you prefer classic top-handle steering and a lighter hand tool for general woodworking.

DEWALT 7-1/4-Inch Cordless Miter Saw

The DEWALT DCS361B miter saw is built specifically for repeatable crosscuts, bevels, and miter joints rather than freehand curves. It mounts a 7-1/4-inch blade on a fixed, rigid frame that delivers consistent trim cuts that a jig saw cannot achieve. That structure comes with significant bulk. The DCS361B weighs 30 pounds and measures 25.4 inches long by 21 inches wide, whereas the DCS335B jig saw weighs just 4.76 pounds and measures 11.5 inches long. You give up the flexibility to trace patterns, execute plunge cuts, or work in tight spaces. Select the DCS361B if your cutting work focuses on clean moldings, baseboards, and accurate framing angles on the DEWALT 20V system.

The DEWALT DCS565P1 circular saw is engineered for swift ripping and lumber sizing rather than intricate scroll cuts. It uses a 6-1/2-inch blade and tilts up to a 50-degree bevel, allowing you to cut through dimensional lumber faster than a reciprocating jig saw blade can manage. In exchange, you lose the narrow radius control and 45-degree positive stop shoe found on the DCS335B. The circular saw is also heavier at 7.6 pounds and longer at 15.9 inches, compared to the 4.76-pound, 11.5-inch DCS335B. Pick the DCS565P1 when your routine projects center on rapid crosscuts, board breakdown, and angled construction cuts rather than delicate curves or detailed interior cutouts.

The WEN 20691BT track saw provides guided, track-aligned cuts up to 2.25 inches deep, giving you straight rip accuracy that a freehand jig saw cannot match. It uses a 6.5-inch circular blade driven by a brushless motor. However, this accuracy costs maneuverability. Weighing 11.3 pounds and measuring 13 inches long by 9.84 inches wide, the WEN saw is substantially heavier than the 4.76-pound DCS335B. It is limited to straight lines on a track system and cannot make tight radius cuts, scroll cuts, or quick curved adjustments. Choose the WEN track saw if your work emphasizes breaking down sheet goods into straight panels rather than curved shape carving.

Quick picks

Our 7 picks

1 Best overall

DEWALT 20V MAX Cordless Barrel Grip Jig Saw

Best for: barrel-grip control on 20V batteries

Voltage

20V MAX

Power Source

Cordless

Dimensions

11.5 × 3.75 × 8.19 inches

Weight

4.76 pounds

View on Amazon: DEWALT 20V MAX Cordless Barrel Grip Jig Saw

This cordless barrel-grip jig saw runs on the DEWALT 20V MAX platform. It features a brushless motor, a variable speed dial reaching up to 3,200 blade speed, and keyless bevel detents at 0°, 15°, 30°, and 45°. You also get an integrated dust blower, an LED light, and keyless T-shank blade swaps. It suits you if you want close-in workpiece control without a top-handle grip.

Pros

• Brushless motor with variable speed dial up to 3,200 blade speed
• All-metal keyless shoe bevel with detents at 0°, 15°, 30°, and 45°
• Integrated dust blower and bright LED light for line-of-sight visibility
• All-metal lever-action keyless blade clamp for T-shank blades

Cons

• Bare tool configuration does not include a battery or charger
• Weighs 4.76 pounds before attaching a battery

Good fit if

• You already own compatible DEWALT 20V MAX batteries and chargers.
• You want a compact barrel-grip body for low-profile cut control.

Skip if

• You need a bundled battery and charger right out of the box.
• You prefer a top-handle style jig saw body.

Verdict: DEWALT 20V MAX Barrel Grip Jig Saw provides precise speed control and keyless bevel adjustments in a low-profile cordless format. It gives you solid cutting control if you already use the 20V MAX tool system.

2 Also great

DEWALT 20V MAX Cordless 7-1/4-Inch Circular Saw

Best for: fast, straight framing and sheet cuts

Blade Diameter

7-1/4 in.

No-Load Speed

5,500 RPM

Cutting Depth 90

2-9/16 in.

Voltage

20V MAX

Power Source

Cordless

Dimensions

15.4 × 9.44 × 9.6 inches

View on Amazon: DEWALT 20V MAX Cordless 7-1/4-Inch Circular Saw

When your cutting calls for straight, deep cuts rather than intricate curves, this DEWALT cordless circular saw gives you a heavy-duty alternative to a jig saw. You get a brushless motor spinning a 7-1/4-inch blade at up to 5,500 RPM, delivering a 2-9/16-inch cutting depth at 90 degrees. It suits you if you need rapid breakdown of framing lumber and sheet goods on the 20V platform.

Pros

• 7-1/4-inch blade provides a 2-9/16-inch maximum cutting depth at 90 degrees
• Brushless motor delivers up to 5,500 RPM no-load speed and 1,700 MWO
• Automatic electric brake stops the blade quickly after trigger release
• Supports bevel cuts with a 2-inch cutting depth at 45 degrees

Cons

• Tool only; 20V MAX battery and charger are not included
• Weighs 9.88 pounds before adding a battery pack

Good fit if

• You need straight crosscuts and rip cuts up to 2-9/16 inches deep.
• You already own compatible DEWALT 20V MAX batteries.
• You want an electric brake to halt blade spin immediately.

Skip if

• You need to cut tight curves, scrollwork, or interior cutouts.
• You need a bundled battery and charger in the box.
• You prefer a tool lighter than 9.88 pounds for extended overhead cutting.

Verdict: DEWALT 20V MAX XR 7-1/4-Inch Cordless Circular Saw delivers fast straight cuts and up to 2-9/16 inches of depth capacity for heavy framing tasks. It gives up the curved cutting agility of a jig saw in exchange for 5,500 RPM cutting speed.

3 Best budget

WEN 6.5-Inch Cordless Track Saw

Best for: Ripping thick boards with dual-battery power

Power Source

Cordless

Voltage

20V MAX

Dimensions

13 × 9.84 × 9.84 inches

Weight

15.2 pounds

View on Amazon: WEN 6.5-Inch Cordless Track Saw

This WEN cordless track saw replaces a table saw for rip and bevel cuts. It uses two 20V MAX 4.0 Ah batteries to drive a brushless motor with variable speed from 2000 to 5500 RPM. You can rip boards up to 2.25 inches thick or create 45-degree bevels in 1.65-inch material. It includes two batteries and a charger, making it ready for immediate use.

Pros

• Brushless motor with variable speed from 2000 to 5500 RPM
• Includes two 20V MAX 4.0 Ah batteries with onboard LED gauges
• Rips boards up to 2.25 inches thick
• Compatible with WEN CT9502 and CT9110 tracks

Cons

• Heavier at 15.2 pounds compared to lighter alternatives
• Smaller 6.5-inch blade limits cutting depth versus larger saws
• Requires two batteries for operation, reducing runtime on a single charge

Good fit if

• You need to rip thick boards without a table saw
• You already own WEN 20V MAX batteries
• You want variable speed control for different materials

Skip if

• You prefer a single-battery system for lighter weight
• You need to cut material thicker than 2.25 inches
• You require a larger blade capacity for deeper cuts

Verdict: WEN 6.5-Inch Brushless Track Saw offers substantial power for ripping thick lumber thanks to its dual-battery design. It fits users who already have WEN 20V tools and need precise, variable-speed cutting capabilities for thick stock.

4 Best premium

Baikemon 8-1/4-Inch Cordless Sliding Miter Saw

Best for: wide crosscuts using DEWALT 20V batteries

Blade Diameter

8-1/4"

No-Load Speed

4,100 RPM

Power Source

Cordless

Voltage

20V MAX

Dimensions

31 × 14.5 × 14 inches

Weight

27 pounds

View on Amazon: Baikemon 8-1/4-Inch Cordless Sliding Miter Saw

This Baikemon cordless sliding miter saw runs on DeWalt 20V MAX batteries, giving you a stationary crosscut option instead of a handheld jig saw. Its 4,100 RPM brushless motor drives an 8-1/4-inch blade to deliver a maximum crosscut capacity of 2.56 by 12.20 inches. It suits you if you already own DeWalt batteries and need straight, wide board crosscuts, 47-degree miters, or 45-degree bevels for trim and framing projects.

Pros

• Brushless motor running at 4,100 RPM
• Max cross-cut capacity of 2.56 by 12.20 inches
• Compatible with DEWALT 20V MAX batteries
• Built-in laser guide for alignment
• Includes two TCT blades

Cons

• Battery and charger are not included
• Single bevel only rather than dual bevel
• Weighs 27 pounds, reducing portability compared to handheld saws

Good fit if

• You need to make wide crosscuts up to 12.20 inches using DEWALT 20V MAX batteries.
• You want bevels up to 45 degrees and miters up to 47 degrees left and right.

Skip if

• You need curved or irregular scroll cuts that require a jig saw.
• You need dual-bevel capability without flipping workpieces.

Verdict: Baikemon 8-1/4-Inch Cordless Sliding Miter Saw delivers broad crosscuts and miter angles on an existing DEWALT battery system. It trades the curved cutting versatility of a jig saw for rapid, straight crosscuts on wider boards.

5 Also great

DEWALT 20V MAX Cordless Brushless Jig Saw

Best for: woodworkers already using 20V cordless tool batteries

Voltage

20V MAX

Power Source

Cordless

Dimensions

8.25 × 1.75 × 6.38 inches

Weight

4.2 pounds

View on Amazon: DEWALT 20V MAX Cordless Brushless Jig Saw

This cordless tool delivers up to 3,200 blade speed powered by a 20V brushless motor. You get a four-position orbital action switch, an integrated dust blower, and keyless bevel detents at 0, 15, 30, and 45 degrees. At 4.2 pounds, it suits woodworkers who need precise curved cuts and already own compatible 20V batteries.

Pros

• Brushless motor with variable speed trigger and dial
• Four-position orbital action for cut speed and quality control
• Keyless shoe bevel with detents at 0, 15, 30, and 45 degrees
• Built-in LED light and integrated dust blower

Cons

• Sold as a bare tool without a battery or charger
• Blade clamp is designed specifically for T-shank blades

Good fit if

• You already own compatible 20V batteries and a charger.
• You need tool-free bevel adjustments and quick T-shank blade swaps.
• You want an onboard dust blower and LED to keep cutlines visible.

Skip if

• You need a complete kit that includes a battery and charger.
• You primarily use U-shank jigsaw blades.

Verdict: DEWALT 20V Cordless Brushless Jig Saw provides reliable speed control and flexible orbital settings for detailed woodwork. It is a practical addition if you already use this 20V battery system.

6 Also great

DEWALT 7-1/4-Inch Cordless Miter Saw

Best for: repeatable miter and bevel trim cuts

Blade Diameter

7-1/4"

Voltage

20V MAX

Power Source

Cordless

Dimensions

25.4 × 21 × 16.1 inches

Weight

30 pounds

View on Amazon: DEWALT 7-1/4-Inch Cordless Miter Saw

If you need crosscut precision instead of curved cuts, this 20V MAX cordless miter saw offers an alternative to a jig saw. It runs a 7-1/4-inch blade and weighs 30 pounds for jobsite portability. The tool cuts up to 3-5/8-inch nested crown and 3-1/2-inch vertical base molding. You gain an integrated cut line positioning system and 11 miter stops for repeatable trim work on your existing battery platform.

Pros

• Integrated cut line cross-cut positioning system
• Stainless steel miter detent plate with 11 positive stops
• Cuts 3-5/8-inch nested crown and 3-1/2-inch base vertically
• Cam lock miter handle with oversized bevel scale

Cons

• Sold as bare tool without battery or charger
• Weighs 30 pounds, making it heavier to carry than handheld saws

Good fit if

• You already own compatible DEWALT 20V MAX batteries.
• You make repetitive angle or miter cuts in trim and molding.
• You need a dedicated benchtop cutting station that remains portable.

Skip if

• You need to cut curves, circles, or internal plunge cuts.
• You require an ultralight handheld cutting tool.

Verdict: DEWALT 20V MAX 7-1/4-Inch Cordless Miter Saw replaces curved jig saw flexibility with rigid crosscut accuracy. It delivers clean miter angles and bevel cuts in a portable 30-pound footprint.

7 Best 6-1/2-inch

DEWALT 20V MAX XR 6-1/2-Inch Cordless Track Saw

Best for: straight sheet goods cutting within 1/32 inch

Blade Diameter

6-1/2 in.

No-Load Speed

2,500 - 5,400 RPM

Voltage

20V MAX

Power Source

Cordless

Dimensions

44.3 × 11.3 × 11.3 inches

Weight

13 pounds

View on Amazon: DEWALT 20V MAX XR 6-1/2-Inch Cordless Track Saw

This 20V MAX cordless plunge track saw uses a 6-1/2-inch blade and runs at 2,500 to 5,400 RPM. It delivers straight cuts within 1/32 inch for sheet goods. At 13 pounds, it is heavier than a standard jig saw but provides guided cutting accuracy. You get a kickback brake and an included 48-tooth blade.

Pros

• Variable speed range from 2,500 to 5,400 no-load RPM
• Kickback brake system shuts off motor during stalls or pinches
• Repeatable straight cutting within 1/32 of an inch
• Includes 48-tooth fine-finish blade and onboard wrench

Cons

• Guide tracks sold separately
• At 13 pounds, it is significantly heavier than cordless jig saws

Good fit if

• You need long, straight sheet-breakdown cuts accurate to 1/32 inch.
• You already own compatible DEWALT 20V MAX batteries and guide tracks.
• You require variable cutting speeds between 2,500 and 5,400 RPM.

Skip if

• You need to cut tight curves or interior scrollwork.
• You want a package that includes the guide tracks out of the box.

Verdict: DEWALT 20V MAX 6-1/2-Inch Plunge Track Saw delivers straight sheet-goods breakdown within 1/32 inch for woodworkers who need guided panel cuts rather than curved cuts.

Specifications side by side

Frequently asked questions

See also

• black decker dustbuster 20v hand vacuum alternatives