10 Best SawStop Table Saws with 5 HP, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best SawStop table saws with 5 HP requires matching your workshop electrical service and floor space to the machine build. We compared 10 models based strictly on the specifications published on their listings.
The SawStop Industrial 5 HP 52-Inch Cabinet Saw earns the top position because its 230V motor and 85.5-inch overall length provide wide sheet capacity on single-phase power. This comparison helps you decide which combination of voltage, phase, and fence length matches your shop layout.
Quick picks
The best fit for you
- You need wide sheet capacity on single-phase shop wiring SawStop Industrial 5 HP 52-Inch Cabinet Saw This 230V saw provides an 85.5-inch length for cutting wide panels without three-phase electrical power.
- You want single-phase power in a more compact footprint SawStop Industrial 5HP 1-Phase 36-Inch Cabinet Saw Its shorter 69.3-inch length fits tighter shop spaces while running on 230V single-phase power.
- You run 480V power and cut wide sheet goods SawStop Industrial 5HP 480V 52-Inch Cabinet Saw An 85.5-inch length accommodates large sheet goods on dedicated 480V three-phase connections.
- You have 230V three-phase power and limited workshop space SawStop Industrial 5HP 3-Phase 36-Inch Cabinet Saw The 69.3-inch length occupies less floor space while operating on 230V three-phase power.
Our 10 picks
SawStop Industrial 5 HP 52-Inch Cabinet Saw
Best for: single-phase shops cutting wide sheet goods
- Horsepower
- 5 HP (what this guide is about)
- Voltage
- 230v
- Dimensions
- 85.5 × 36.5 × 34 inches
View on Amazon: SawStop Industrial 5 HP 52-Inch Cabinet Saw Affiliate link
This SawStop Industrial cabinet saw combines a 5 HP motor wired for single-phase 230V power with a 52-inch T-Glide Advance rip fence system. You get the proprietary skin-contact safety brake, above-and-below table dust collection, and an integrated lock-out tag-out switch. At nearly 700 pounds of steel and cast iron, this stationary machine suits shops that cut wide sheet goods regularly and need industrial power without three-phase wiring.
Pros
- Runs on 230V single-phase power instead of three-phase
- Safety system stops the blade on contact with skin
- 52-inch rip fence handles wide panels and sheet goods
- Dual-stage dust extraction with overhead guard and under-table shroud
- Integrated lock-out tag-out switch restricts unauthorized use
Cons
- Large footprint measuring over 85 inches wide
- Weighs nearly 700 pounds, making shop relocation difficult
Good fit if
- You run a shop with 230V single-phase electrical service.
- You regularly cut full sheet goods requiring a 52-inch rip capacity.
- You need contact-detection safety equipment and physical access control.
Skip if
- You have limited floor space and cannot fit an 85-inch-wide table.
- You run a facility configured exclusively for three-phase power.
Verdict: SawStop Industrial 5 HP 52-Inch Cabinet Saw delivers heavy-duty power and wide rip capacity on single-phase shop wiring. It provides extensive ripping width and built-in contact safety without requiring three-phase utility drops.
SawStop Industrial 5 HP 52-Inch Cabinet Saw
Best for: 3-phase production shops cutting large panels
- Horsepower
- 5 HP (what this guide is about)
- Rip Capacity
- 52"
- Voltage
- 230v
- Dimensions
- 85.5 × 36.5 × 34 inches
View on Amazon: SawStop Industrial 5 HP 52-Inch Cabinet Saw Affiliate link
This SawStop industrial cabinet saw features a 5 HP, 3-phase 230-volt motor and a 52-inch T-Glide Advance rip capacity. Constructed from nearly 700 pounds of iron and steel, it includes flesh-sensing safety technology, dual-point dust collection, and an integrated lock-out tag-out switch. It fits commercial workshops equipped with three-phase power that regularly cut large panels and require strict shop-floor operator control.
Pros
- Skin-contact safety system stops the blade on touch
- 52-inch rip capacity with Industrial T-Glide Advance fence
- Dual-zone dust collection via blade guard and under-table shroud
- Integrated lock-out tag-out switch prevents unauthorized access
Cons
- Requires a 230V 3-phase electrical connection
- Large footprint spanning over 85 inches in width
- Nearly 700-pound weight makes shop repositioning difficult
Good fit if
- You have a dedicated 230V 3-phase power supply.
- You need a 52-inch rip capacity for breaking down wide panels.
- You require an integrated lock-out tag-out switch for safety compliance.
Skip if
- You run a shop with only single-phase electrical service.
- You have limited floor space and need a compact 36-inch rip setup.
Verdict: SawStop Industrial 5 HP 52-Inch 3-Phase Cabinet Saw delivers high ripping capacity and integrated safety systems for industrial facilities. Its heavy iron build and 3-phase motor make it a reliable centerpiece for dedicated commercial production.
SawStop 7.5HP 52-Inch Industrial Cabinet Saw
Best for: commercial shops with three-phase 230V power
- Horsepower
- 5 HP (what this guide is about)
- Rip Capacity
- 52"
- Voltage
- 230v
- Dimensions
- 85.5 × 36.5 × 34 inches
View on Amazon: SawStop 7.5HP 52-Inch Industrial Cabinet Saw Affiliate link
This SawStop cabinet saw pairs an industrial build with a 52-inch T-Glide rip fence and extension table. Running on 230V three-phase power, it features an integrated lock-out tag-out switch alongside above- and below-table dust collection shrouding. Nearly 700 pounds of iron and steel keep the table stable during heavy cuts. It suits you if you operate a commercial workshop requiring broad rip capacity and strict access control.
Pros
- SawStop safety system stops blade on skin contact
- 52-inch rip capacity with extension table
- Dual dust collection via blade guard and under-table blade shroud
- Integrated lock-out tag-out switch for access control
Cons
- Requires 230V three-phase power supply
- Substantial weight of nearly 700 pounds
- Large footprint measuring 85.5 inches long by 36.5 inches deep
Good fit if
- You have 230V three-phase electrical power in your shop.
- You require a 52-inch rip capacity for handling wide materials.
- You need a lock-out tag-out switch to control tool access.
Skip if
- You only have access to single-phase electrical power.
- You have limited floor space for an 85.5-inch long table saw.
Verdict: SawStop Industrial Cabinet Saw with 52-Inch Fence delivers heavy iron construction, wide rip capacity, and skin-contact safety shutoff. It is designed for commercial facilities wired for 230V three-phase electrical power.
SawStop Industrial 7.5HP Cabinet Saw with 36-Inch Fence
Best for: industrial shops with 3-phase 230V power
- Horsepower
- 5 HP (what this guide is about)
- Rip Capacity
- 36"
- Voltage
- 230v
- Dimensions
- 69.3 × 36.5 × 34 inches
View on Amazon: SawStop Industrial 7.5HP Cabinet Saw with 36-Inch Fence Affiliate link
This SawStop cabinet saw pairs a 36-inch rip capacity with a 230-volt, three-phase electrical setup. Built with nearly 700 pounds of iron and steel, it features the SawStop contact-detection safety system, integrated lock-out tag-out controls, and dual-zone dust collection at the blade guard and under the table. You will find it suits high-demand production shops that require dedicated three-phase power and a compact 36-inch rail setup rather than wider extensions.
Pros
- SawStop safety system stops blade on contact with skin
- Dual dust collection via blade guard and under-table blade shroud
- Integrated lock-out tag-out switch prevents unauthorized use
- Nearly 700 pounds of iron and steel build
Cons
- Requires a 3-phase 230V power connection
- Rip capacity maxes out at 36 inches rather than 52 inches
- Weighs nearly 700 pounds, making relocation difficult
Good fit if
- You have a 3-phase 230V power supply available in your shop.
- You prefer a 36-inch rip capacity over wider 52-inch rails to save floor space.
- You need integrated lock-out tag-out capability for access control.
Skip if
- You run your workshop on standard single-phase wiring.
- You require a 52-inch rip capacity for handling wider panels.
Verdict: SawStop Industrial Cabinet Saw with 36-Inch Rip Fence provides robust safety mechanics and heavy iron construction for commercial shops with 3-phase 230V power. Its 36-inch fence configuration offers an industrial build in a more compact width than 52-inch models.
SawStop Industrial 36-Inch 480V Cabinet Saw
Best for: industrial shops needing a 36-inch rip capacity
- Horsepower
- 5 HP (what this guide is about)
- Rip Capacity
- 36 inches
- Voltage
- 480v
- Dimensions
- 69.3 × 36.5 × 34 inches
View on Amazon: SawStop Industrial 36-Inch 480V Cabinet Saw Affiliate link
This SawStop industrial cabinet saw features a 36-inch Industrial T-Glide Advance rip fence system, rails, and an extension table. Designed for demanding industrial environments, it delivers 5 HP performance within an iron and steel build weighing nearly 700 pounds. You get integrated above-table and below-table dust collection plus a Lock-Out Tag-Out switch. It suits you if your facility demands high stability in a 36-inch rip footprint.
Pros
- Patented safety system stops the blade on contact with skin
- Dual dust collection via blade guard and under-table shroud
- Integrated Lock-Out Tag-Out switch prevents unauthorized operation
- Nearly 700 pounds of iron and steel construction provides high stability
Cons
- Rip capacity is limited to 36 inches rather than 52 inches
- Heavy frame weighing nearly 700 pounds restricts shop mobility
Good fit if
- You need a stable industrial saw setup with a 36-inch rip capacity.
- You require an integrated Lock-Out Tag-Out switch for facility safety compliance.
- You want standard dust collection above and below the blade.
Skip if
- You need a wider 52-inch rip fence for breaking down large panels.
- You operate a flexible workspace that requires frequently moving equipment.
Verdict: SawStop Industrial Cabinet Saw with 36-Inch Rip Fence provides robust cast-iron stability, active contact safety, and integrated access control. It suits dedicated production settings that do not require the footprint of a 52-inch extension table.
SawStop Industrial 5HP 1-Phase 36-Inch Cabinet Saw
Best for: single-phase shops needing compact industrial cutting
- Horsepower
- 5 HP (what this guide is about)
- Rip Capacity
- 36 inches
- Voltage
- 230v
- Dimensions
- 69.3 × 36.5 × 34 inches
View on Amazon: SawStop Industrial 5HP 1-Phase 36-Inch Cabinet Saw Affiliate link
This cabinet saw pairs a 5 HP, single-phase 230V motor with a 36-inch rip fence. It features the SawStop contact-detection safety system, an integrated lock-out tag-out switch, and nearly 700 pounds of steel and cast iron mass. You get dual dust collection via the blade guard and internal blade shroud. It suits you if you run a workshop with 230V power and need heavy-duty cutting capacity in a compact footprint.
Pros
- SawStop safety system stops blade on contact with skin
- High-power 5 HP single-phase motor running on 230V
- Over-table blade guard and under-table shroud dust collection
- Integrated lock-out tag-out switch prevents unauthorized operation
Cons
- Smaller 36-inch rip capacity compared to 52-inch models
- Requires a dedicated 230V single-phase electrical supply
Good fit if
- You have single-phase 230V power available in your shop.
- You need 5 HP industrial power but have floor space limited to a 36-inch fence.
- You want blade-contact safety and an integrated lock-out tag-out switch.
Skip if
- You require a wider 52-inch rip capacity for breaking down large sheet goods.
- You only have access to standard 120V household outlets or 3-phase power.
Verdict: SawStop Industrial 5 HP 36-Inch Cabinet Saw delivers heavy-duty power and active safety protection for shops with 230V single-phase power. It provides industrial build quality without the massive footprint of a 52-inch extension table.
SawStop Industrial 5HP 3-Phase 36-Inch Cabinet Saw
Best for: 3-phase shops wanting compact industrial rip capacity
- Horsepower
- 5 HP (what this guide is about)
- Voltage
- 230v
- Dimensions
- 69.3 × 36.5 × 34 inches
View on Amazon: SawStop Industrial 5HP 3-Phase 36-Inch Cabinet Saw Affiliate link
This SawStop Industrial Cabinet Saw pairs a 5 HP motor with a 36-inch Industrial T-Glide fence system. It runs on three-phase 230V power and weighs nearly 700 pounds of steel and iron. The saw includes skin-contact blade-stopping safety, dual-zone dust collection, and an integrated lock-out tag-out switch. It suits production shops that require commercial-grade power in a footprint narrower than 52-inch models.
Pros
- 5 HP motor configured for three-phase 230V power
- SawStop safety system stops blade on contact with skin
- Over-blade collection guard and under-blade shrouding included
- Nearly 700-pound iron and steel mass minimizes vibration
- Integrated lock-out tag-out switch restricts unauthorized machine access
Cons
- Requires three-phase 230V power, not standard single-phase
- 36-inch rip capacity provides less cutting width than 52-inch versions
- Total weight near 700 pounds makes shop relocation difficult
Good fit if
- You operate an industrial facility equipped with three-phase 230V power.
- You need 5 HP cutting capacity but have space constraints favoring a 36-inch fence.
- You require an integrated lock-out tag-out switch for shop safety compliance.
Skip if
- You only have access to single-phase electrical service.
- You regularly rip large panels requiring a 52-inch rip capacity.
Verdict: SawStop 5 HP Industrial Cabinet Saw with 36-Inch Fence delivers high-demand 3-phase performance within a smaller footprint than 52-inch models. Its nearly 700-pound build and built-in safety controls support heavy industrial workloads.
SawStop Industrial 5HP 480V 52-Inch Cabinet Saw
Best for: industrial shops with 480V three-phase power
- Horsepower
- 5 HP (what this guide is about)
- Rip Capacity
- 52"
- Voltage
- 480v
- Dimensions
- 85.5 × 36.5 × 34 inches
View on Amazon: SawStop Industrial 5HP 480V 52-Inch Cabinet Saw Affiliate link
You get a 5 HP 480V three-phase cabinet saw. The machine includes a 52-inch T-Glide rip fence. The unit weighs nearly 700 pounds across iron and steel framing. Safety system stops blade on skin contact. Dust collection operates above table and below table. Integrated lock-out tag-out switch restricts unauthorized access. Footprint measures 85.25 inches wide, 36.5 inches deep, 34 inches high. Unit fits high-voltage industrial facilities.
Pros
- Blade stops on contact with skin
- 52-inch rip capacity with T-Glide fence
- Overhead guard and under-table dust shroud
- Integrated lock-out tag-out safety switch
- Weighs nearly 700 pounds for stability
Cons
- Requires 480V three-phase electrical hookup
- Wide 85.25-inch footprint demands substantial shop space
Good fit if
- You have a workshop with 480V three-phase power.
- You need 52 inches of rip capacity for wide panels.
- You require lock-out tag-out switches for workplace safety.
Skip if
- You lack 480V three-phase electrical infrastructure.
- You have limited floor space for an 85.25-inch wide table.
Verdict: SawStop Industrial 5 HP 480V 52-Inch Cabinet Saw provides high-voltage operation, skin-sensing protection, and wide ripping capacity. Heavy iron framing ensures stability during demanding cutting tasks.
SawStop Industrial 5HP 480V 36-Inch Cabinet Saw
Best for: 480V industrial facilities needing compact fence dimensions
- Horsepower
- 5 HP (what this guide is about)
- Rip Capacity
- 36"
- Voltage
- 480v
- Dimensions
- 69.3 × 36.5 × 34 inches
View on Amazon: SawStop Industrial 5HP 480V 36-Inch Cabinet Saw Affiliate link
This 5 HP cabinet saw runs on a 480-volt, three-phase power supply and includes a 36-inch rip capacity fence system. It features a heavy 700-pound iron and steel construction, integrated dual dust collection, and a built-in lock-out tag-out switch. It suits your production shop if you have dedicated industrial high-voltage power and need heavy-duty cutting capacity without the larger footprint of wider rails.
Pros
- Safety system stops the blade on contact with skin
- Dual dust collection covers above and below the table
- Integrated lock-out tag-out switch limits unauthorized operation
- Nearly 700 pounds of iron and steel construction
Cons
- Requires a 480V three-phase electrical hookup
- 36-inch rip capacity offers less width than 52-inch models
- Heavy 700-pound mass makes shop repositioning difficult
Good fit if
- You run a workshop equipped with 480V three-phase electrical service.
- You want 5 HP cutting performance in a 36-inch fence footprint.
- You need OSHA-compliant lock-out tag-out switches for multiple users.
Skip if
- You operate on single-phase or 230-volt shop power.
- You require a 52-inch rip capacity for breaking down large panels.
Verdict: SawStop Industrial 5 HP 480V 36-Inch Cabinet Saw provides heavy-duty cutting and contact-detection safety for 480-volt three-phase facilities. Its 36-inch fence configuration suits production environments with tighter floor layouts.
SawStop Industrial 7.5HP 52-Inch 480V Cabinet Saw
Best for: commercial shops with 480V 3-phase power
- Horsepower
- 5 HP (what this guide is about)
- Rip Capacity
- 52"
- Voltage
- 480v
- Dimensions
- 85.5 × 36.5 × 34 inches
View on Amazon: SawStop Industrial 7.5HP 52-Inch 480V Cabinet Saw Affiliate link
This SawStop Industrial cabinet saw pairs a 52-inch rip capacity with 480-volt, three-phase electrical requirements. Weighing nearly 700 pounds of iron and steel, it features an integrated Lock-Out Tag-Out switch, dual dust collection above and below the table, and the SawStop safety brake. It suits you if you operate an industrial shop wired for 480-volt power and need wide ripping capabilities for large sheet goods.
Pros
- 52-inch rip capacity with extension table
- SawStop safety system stops on contact with skin
- Dust collection blade guard and under-table blade shroud included
- Integrated Lock-Out Tag-Out safety switch
Cons
- Requires 480-volt 3-phase electrical service
- Heavy build at nearly 700 pounds limits movement
- Overall width requires over 85 inches of floor space
Good fit if
- You have dedicated 480-volt, three-phase electrical hookups.
- You need 52 inches of rip capacity for wide panels.
- You require Lock-Out Tag-Out control for multiple operators.
Skip if
- You only have 230-volt or single-phase workshop wiring.
- You have limited shop space that cannot fit an 85-inch-wide saw.
Verdict: SawStop Industrial 52-Inch Cabinet Saw provides broad cutting capacity and safety controls for high-demand operations. It is designed specifically for production shops equipped with 480-volt power.
Specifications side by side
| Spec | SawStop Industrial 5 HP 52-Inch Cabinet Saw | SawStop Industrial 5 HP 52-Inch Cabinet Saw | SawStop 7.5HP 52-Inch Industrial Cabinet Saw | SawStop Industrial 7.5HP Cabinet Saw with 36-Inch Fence | SawStop Industrial 36-Inch 480V Cabinet Saw | SawStop Industrial 5HP 1-Phase 36-Inch Cabinet Saw | SawStop Industrial 5HP 3-Phase 36-Inch Cabinet Saw | SawStop Industrial 5HP 480V 52-Inch Cabinet Saw | SawStop Industrial 5HP 480V 36-Inch Cabinet Saw | SawStop Industrial 7.5HP 52-Inch 480V Cabinet Saw |
|---|---|---|---|---|---|---|---|---|---|---|
| Rip Capacity | not stated | 52" | 52" | 36" | 36 inches | 36 inches | not stated | 52" | 36" | 52" |
| Horsepower | 5HP | 5HP | 7.5HP | 7.5HP | 7.5 HP | 5 HP | 5HP | 5HP | 5HP | 7.5HP |
| Voltage | 230v | 230v | 230v | 230v | 480v | 230v | 230v | 480v | 480v | 480v |
| Dimensions | 85.5 × 36.5 × 34 inches | 85.5 × 36.5 × 34 inches | 85.5 × 36.5 × 34 inches | 69.3 × 36.5 × 34 inches | 69.3 × 36.5 × 34 inches | 69.3 × 36.5 × 34 inches | 69.3 × 36.5 × 34 inches | 85.5 × 36.5 × 34 inches | 69.3 × 36.5 × 34 inches | 85.5 × 36.5 × 34 inches |
| Color | Black | Black | Black | Black | Black | Black | Black | Black | Black | Black |
| Model | ICS51230-ATGI52 | ICS53230-ATGI52 | ICS73230-ATGI52 | ICS73230-ATGI36 | ICS73480-ATGI36 | ICS51230-ATGI36 | ICS53230-ATGI36 | ICS53480-ATGI52 | ICS53480-ATGI36 | ICS73480-ATGI52 |
If you want to compare motor ratings for exercise machines, our guide lists the best treadmills with 3 5 hp.
How to Choose a 5 HP SawStop
-
Verify Workshop Voltage Supply
Check your commercial electrical panel before ordering a cabinet saw. SawStop builds these industrial units for either 230V or 480V service. A standard commercial woodshop with step-down transformers usually supplies 230V, making models like the SawStop Industrial 5 HP 52-Inch Cabinet Saw appropriate. If your facility runs high-voltage distribution lines, select a dedicated 480V model to eliminate the need for secondary transformers. Running an incompatible voltage will prevent motor startup or cause severe hardware damage. Match the saw voltage attribute directly to your line service.
-
Select the Correct Phase
Determine whether your workshop wiring supplies single-phase or three-phase power. Single-phase service is standard in smaller workshops and residential settings, whereas three-phase utility drops are common in dedicated commercial plants. Saws like the SawStop Industrial 5HP 1-Phase 36-Inch Cabinet Saw operate on 230V single-phase lines without specialized phase converters. If your facility has three-phase power, choose a 3-phase model to maximize motor duty cycle and operational efficiency. Connecting a three-phase motor to single-phase service requires external rotary converters, so verify your breaker configuration before purchasing.
-
Evaluate Fence Rip Capacity
Evaluate the width of the materials you routinely cut. Saws equipped with a 52-inch rip fence accommodate full four-by-eight sheet goods, allowing you to split panels down the center in a single pass. If your work focuses primarily on solid lumber, narrow framing, or pre-cut stock, a 36-inch fence provides plenty of cutting range for everyday joinery. Choosing the 36-inch fence option, such as on the SawStop Industrial 5HP 3-Phase 36-Inch Cabinet Saw, gives you full 5 HP cutting performance while avoiding unnecessary fence rail overhang.
-
Plan for Table Height
Examine the standard working height when planning your workflow and surrounding support surfaces. These industrial cabinet saws feature a table height of 34 inches from floor to top surface. You should compare this 34-inch specification against your existing outfeed tables, roller stands, and workbench heights to ensure smooth material transfer. If your outfeed supports sit higher or lower, wide sheet goods can catch during cuts. Verifying this 34-inch dimension in advance helps you build or adjust mobile carts and stationary outfeed tables to align flush with the cast-iron table top.
-
Account for Machine Depth
Review the front-to-back table dimension to ensure proper operating clearance around the blade. Each model features a width specification of 36.5 inches. This depth measurement dictates how much cast-iron support sits in front of the blade before your cut begins. You must allocate extra clearance both in front of and behind this 36.5-inch profile so you have ample room to stand, feed stock, and complete rip cuts safely. Verify that your designated floor area can comfortably accommodate this machine depth alongside the necessary operator walking lanes.
-
Assess Heavy Iron Stability
Consider the structural mass of the machine when setting up your production space. These industrial models feature heavy cast-iron construction, with configurations weighing nearly 700 pounds. This heavy iron framing dampens operational vibration and prevents table movement when feeding thick timbers or full panels. However, a 700-pound saw requires a solid concrete floor and careful machinery placement. If you plan to reposition the saw periodically, check whether your shop floor supports this concentrated load. Ensure you have appropriate lifting equipment or heavy-duty machinery skates ready for installation day.
Frequently asked questions
Can you run a 5 HP SawStop table saw on single-phase workshop power?
Yes, you can run specific 5 HP models on single-phase power. Saws such as the ICS51230-ATGI52 and ICS51230-ATGI36 operate on 230V single-phase electrical lines. You will need a dedicated 230-volt circuit wired with appropriate heavy-gauge wiring and breaker capacity to handle the continuous load of the 5 HP industrial motor.
What is the standard table height across SawStop industrial cabinet saws?
All listed SawStop industrial cabinet saws feature a table height of 34 inches. This consistent vertical measurement allows you to align matching outfeed tables, material rollers, or side extension supports smoothly. The 34-inch height remains identical across both 36-inch and 52-inch fence assemblies in the industrial lineup.
How do SawStop model numbers identify phase and voltage ratings?
SawStop model numbers specify electrical configurations directly in their central digits. For example, the ICS51230 designation denotes a 5 HP saw wired for single-phase 230V power. The ICS53230 designation signifies 3-phase 230V power, while the ICS53480 and ICS73480 numbers indicate 480V 3-phase equipment built for dedicated commercial factories.
Do these 5 HP SawStop table saws come with contact-detection safety systems?
Yes, all listed SawStop industrial cabinet saws include integrated skin-contact detection safety systems. When human skin contacts the blade, the safety mechanism triggers instantly, stopping rotation and retracting the blade below the cast-iron table. This active protection comes standard on every single-phase and three-phase industrial unit.
What is the front-to-back depth of these 5 HP industrial cabinet saws?
Every listed 5 HP industrial cabinet saw has a fixed front-to-back depth of 36.5 inches. This dimension stays consistent whether you choose a 69.3-inch overall length or an 85.5-inch extended setup. Knowing this 36.5-inch width helps you calculate required clearance for infeed positioning and rear outfeed equipment.
Which SawStop 5 HP models are designed for 480V electrical service?
Models containing the 480 code designation are built specifically for 480V industrial three-phase power. These include 36-inch fence models like the ICS53480-ATGI36 and ICS73480-ATGI36, alongside 52-inch options like the ICS53480-ATGI52 and ICS73480-ATGI52. They connect to commercial high-voltage power grids without requiring secondary step-down electrical transformers.