Best Jet Table Saws: 15 Models Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you search for the best jet table saws and woodworking machinery, comparing factory dimensions and power options helps you choose the right tool. Jet offers 10-inch stationary table saws with 30-inch to 52-inch rip capacities, wood and metal band saws from 9 to 18 inches, scroll saws, and sliding miter saws operating on 120V or 230V power.
This guide compares 15 models based strictly on the specifications published on their listings. The JET 14-Inch 1.75 HP Band Saw takes the top spot because its 13-inch resaw depth and cast-iron table make it best for resawing thick slabs in small wood shops.
Quick picks
Our 15 picks
JET 14-Inch 1.75 HP Band Saw
Best for: resawing thick slabs in small wood shops
- Horsepower
- 1.75 HP
- Cutting Width
- 13-Inch
- Dimensions
- 75.5 × 27 × 37 inches
- Weight
- 272 pounds
This 14-inch woodworking band saw runs on a 1.75 HP capacitor-run motor and handles blades from 1/8 inch to 3/4 inch wide. It features a 13-inch resaw capacity, a 13-1/2-inch throat, and a 360-square-inch cast-iron table that tilts up to 45 degrees right. You get an included steel stand and an aluminum resaw fence, making it well suited for home wood shops slicing thick boards and bookmatched panels.
Pros
- 13-inch resaw capacity accommodates thick slabs in a single pass
- Ground cast-iron table provides 360 square inches of work surface and tilts 0–45° right
- Includes steel stand and machined-aluminum resaw fence
- Supports blade widths from 1/8 inch to 3/4 inch with ball-bearing guides
Cons
- Saw blade is sold separately
- Table tilts only to the right, not to the left
Good fit if
- You need up to 13 inches of resaw capacity for slicing thick lumber or bookmatched panels.
- You want an included steel stand and aluminum resaw fence with a measuring scale.
- You work with hardwood, softwood, and manufactured board in a home or small production shop.
Skip if
- You require a saw blade included directly in the box.
- You need a portable unit rather than a stationary 272-pound machine.
Verdict: Jet 14-Inch 1.75 HP Woodworking Band Saw delivers 13 inches of resaw depth and a rigid cast-iron table for cutting thick boards. Its 1.75 HP motor and wide blade range give you substantial versatility across hardwoods and sheet goods.
Jet 9-Inch Benchtop Band Saw
Best for: small-shop curve cutting and light resawing
- Dimensions
- 19 × 14.1 × 29 inches
- Weight
- 40 pounds
This compact benchtop woodworking saw gives you a 9-inch throat and a 3-1/2-inch resaw capacity for small projects. Weighing 40 pounds with a 19 by 14.1-inch footprint, it mounts to any bench and connects to a 2-1/2-inch dust port. Its worktable tilts up to 45 degrees for bevel cuts. It fits you if you require basic curve cutting and light resawing without consuming dedicated floor space.
Pros
- Worktable tilts from 0 to 45 degrees for bevel cuts
- Includes fence, miter gauge, and table assembly in the box
- Integrated 2-1/2-inch dust port connects to shop vacuums
- Cast aluminum wheels with precision blade guides
Cons
- Resaw depth capped at 3-1/2 inches
- Mounting hardware is not included in the box
- Intended only for wood and wood composites
Good fit if
- You need a 40-pound benchtop saw with a 9-inch throat.
- You cut wood curves or stock up to 3-1/2 inches thick.
- You make bevel cuts up to 45 degrees.
Skip if
- You need to resaw boards thicker than 3-1/2 inches.
- You plan to cut metal or non-wood materials.
Verdict: Jet 9-Inch Benchtop Band Saw provides a compact 9-inch throat and tilting table for tight curves and basic resawing. It suits small workshops needing dependable wood cutting in a 40-pound benchtop footprint.
Jet 10-Inch Band Saw with Stand
Best for: compact workshops needing flexible stand mounting
- Horsepower
- 1/2 HP
- Voltage
- 115V
- Blade Diameter
- 10-Inch
- Dimensions
- 34.6 × 13 × 16.5 inches
- Weight
- 83 pounds
This Jet 10-inch band saw runs on a standard 115V power supply and weighs 83 pounds. It includes a rigid steel stand for floor setup alongside a compact benchtop configuration. The tool uses a Poly-V drive system and upper and lower ball bearing blade guides for stability. If you need a compact workshop cutting station that runs on standard household voltage without taking up permanent floor space, this setup fits your needs.
Pros
- Includes rigid steel stand for floor mounting
- Upper and lower ball bearing blade guides
- Poly-V drive system minimizes vibration
- Quick-release blade tension lever
- Runs on standard 115V single-phase power
Cons
- Weighs 83 pounds, limiting frequent benchtop repositioning
- Single-voltage 115V operation without 230V support
Good fit if
- You need a 10-inch saw that plugs into standard 115V outlets.
- You want the option to mount your tool on an included steel floor stand.
- You require ball bearing blade guides and an extruded aluminum fence.
Skip if
- You need dedicated 230V workshop machinery.
- You require a lightweight bench machine for portable jobsite transport.
Verdict: Jet 10-Inch Band Saw with Stand delivers a flexible cutting platform with included stand mounting and ball bearing guides. It serves shops wanting standard 115V operation without sacrificing stable blade support.
Jet 14-Inch 1 HP Band Saw
Best for: general curved cutting and 6-inch resawing projects
- Horsepower
- 1 HP
- Voltage
- 115/230V
- Dimensions
- 26 × 19 × 68 inches
- Weight
- 120 pounds
This Jet 14-inch band saw features a 1 HP motor wired for dual-voltage 115V or 230V operation. It delivers a 6-inch resaw capacity alongside a cast iron frame and balanced six-spoke wheels to minimize vibration. Rack-and-pinion blade guide adjustments help streamline setup. If you need a stationary wood-cutting saw for curved cuts and moderate resawing on standard household circuits, this unit fits your workshop.
Pros
- Dual-voltage 115V/230V 1 HP motor
- Upper and lower cast iron frame
- Rack-and-pinion blade guide post adjustment
- Computer-balanced six-spoke wheels
- Upper and lower ball bearing blade guides
Cons
- Resaw capacity limited to 6 inches
- Lower 1 HP rating compared to larger shop machines
- Stands 68 inches tall with a fixed 120-pound footprint
Good fit if
- You need a stationary saw that can operate on 115V or 230V power.
- You cut stock that fits within a 6-inch resaw depth.
- You want micro-adjustable ball bearing blade guides.
Skip if
- You need more than 6 inches of resaw capacity.
- You require more than 1 HP of motor power for heavy resawing.
Verdict: Jet 14-Inch 1 HP Band Saw provides solid frame rigidity and dual-voltage flexibility for standard curved cuts and 6-inch resawing. It gives you dependable tracking control without demanding dedicated high-voltage shop wiring.
JET ProShop II 10-Inch Table Saw with Cast Wings
Best for: shops needing 120V power and cast wings
- Blade Diameter
- 10-Inch
- Rip Capacity
- 30-Inch
- Horsepower
- 1-3/4 HP
- Voltage
- 120V
- Dimensions
- 60 × 40 × 43 inches
View on Amazon: JET ProShop II 10-Inch Table Saw with Cast Wings
The Jet ProShop II 10-Inch Table Saw with Cast Wings gives you a 1.75 HP motor that runs on standard 120V power. It features cast wings, a 30-inch rip capacity, and a 10-inch blade. A single-belt drive system minimizes vibration, while the magnetic paddle switch includes a relocated motor reset. This saw suits woodworkers who want a stable stationary machine without upgrading to a 230V workshop circuit.
Pros
- Operates on standard 120V power with a 1.75 HP motor
- Solid cast wings provide support and stability
- Single-belt drive design reduces vibration and simplifies belt tensioning
- Quick-release riving knife and arbor lock enable tool-free adjustments
Cons
- Rip capacity is limited to 30 inches
- Stationary dimensions require a dedicated 60 by 40-inch footprint
Good fit if
- You need a 10-inch table saw running on a standard 120V power supply.
- You prefer cast wings over stamped steel extensions for stability.
- You cut stock that fits within a 30-inch rip capacity.
Skip if
- You need 50-inch or 52-inch rip capacity to break down large sheet goods.
- You want a 3 HP or 5 HP cabinet saw powered by 230V.
- You lack workshop floor space for a 60-inch by 40-inch machine.
Verdict: Jet ProShop II 10-Inch Table Saw with Cast Wings delivers steady 1.75 HP performance on standard 120V power alongside rigid cast wings. It provides reliable 30-inch rip performance for woodworkers who do not require a 230V circuit.
JET ProShop II 10-Inch Table Saw with 52-Inch Rip
Best for: ripping wide panels on standard 120V power
- Blade Diameter
- 10-Inch
- Rip Capacity
- 52-Inch
- Horsepower
- 1-3/4 HP
- Voltage
- 120V
- Dimensions
- 82 × 40 × 43 inches
- Weight
- 286 pounds
View on Amazon: JET ProShop II 10-Inch Table Saw with 52-Inch Rip
This Jet ProShop II table saw provides a 10-inch blade and an expansive 52-inch rip capacity powered by a 1-3/4 HP motor. It runs on standard 120V single-phase power, requiring no 230V electrical circuit. The saw includes steel extension wings, a magnetic paddle switch, and onboard storage. It suits you if you cut wide sheet materials and want extensive rip width without changing household electrical wiring.
Pros
- Expansive 52-inch rip capacity for wide stock
- Runs on standard 120V single-phase power
- Quick-release riving knife and redesigned arbor lock
- Single-belt design reduces vibration and eases tensioning
Cons
- Equipped with steel wings rather than cast iron wings
- Large 82-inch length requires significant shop floor space
Good fit if
- You need a 52-inch rip capacity for breaking down wide panels.
- You want a stationary saw that plugs into a standard 120V circuit.
- You value quick-release arbor and riving knife mechanisms for fast blade changes.
Skip if
- You prefer cast iron extension wings over stamped steel wings.
- You have a compact workshop that cannot fit an 82-inch-long machine footprint.
Verdict: Jet ProShop II 10-Inch Table Saw with 52-Inch Rip delivers massive cutting width on a standard 120V electrical supply. Its steel wings and 1-3/4 HP motor give you wide ripping capabilities without needing 230V wiring.
JET 7 x 12-Inch Horizontal/Vertical Metal Band Saw
Best for: horizontal and vertical metal stock cutting
- Blade Diameter
- 12-Inch
- Dimensions
- 48 × 17 × 44 inches
- Weight
- 374 pounds
View on Amazon: JET 7 x 12-Inch Horizontal/Vertical Metal Band Saw
If you need metal-cutting capability, this machine provides horizontal and vertical operation with a 7 by 12-inch capacity. You get a toolless quick-lock vise with miter presets at 15, 30, and 45 degrees, plus a built-in coolant system in the base. It includes a 9 by 12-inch infeed table and rolls on four 8-inch rubber wheels. This unit suits metalworkers who need dedicated cut-off utility rather than standard wood rip cuts.
Pros
- Toolless quick-lock vise with preset miters at 15, 30, and 45 degrees
- Base includes a built-in coolant system and chip tray
- Large 9 by 12-inch infeed table works in horizontal and vertical positions
- Four 8-inch rubber wheels for mobility around the shop
Cons
- Substantial weight at 374 pounds
- Built specifically for metal stock rather than standard sheet ripping
Good fit if
- You need both horizontal cut-off and vertical band saw operations.
- You work with metal that requires an integrated coolant system.
- You want mobile machinery equipped with four 8-inch wheels.
Skip if
- You need a standard circular table saw for ripping wood boards.
- You cannot accommodate a 374-pound machine in your workspace.
Verdict: JET 7 x 12-Inch Horizontal/Vertical Metal Band Saw delivers dual-position metal cutting with an integrated coolant system and built-in mobile base. It provides heavy-duty stock support for metal fabrication instead of traditional table saw woodworking tasks.
JET ProShop II 10-Inch Table Saw with Steel Wings
Best for: Woodworkers wanting 120V power with steel wings
- Blade Diameter
- 10-Inch
- Rip Capacity
- 30-Inch
- Horsepower
- 1-3/4 HP
- Voltage
- 120V
- Dimensions
- 60 × 40 × 43 inches
- Weight
- 236 pounds
View on Amazon: JET ProShop II 10-Inch Table Saw with Steel Wings
The Jet ProShop II is a 10-inch table saw fitted with stamped steel wings and a 1.75 HP motor running on standard 120V power. It provides a 30-inch rip capacity for breaking down sheet goods and boards. Features include a quick-release riving knife, single-belt drive, and an arbor lock. You get a stationary 236-pound workshop tool designed for woodworkers who want standard household outlet power.
Pros
- 1.75 HP motor runs on standard 120V power
- 30-inch rip capacity for standard board widths
- Quick-release riving knife and arbor lock for fast blade changes
- Single-belt drive design reduces vibration
- Magnetic paddle switch with integrated motor reset
Cons
- Equipped with stamped steel wings rather than cast iron
- 30-inch rip capacity limits wide panel cuts compared to 52-inch setups
- Substantial 236-pound weight requires stationary shop placement
Good fit if
- You want a 10-inch saw powered by a standard 120V outlet.
- You need up to 30 inches of rip capacity for your projects.
- You prefer steel wings over heavier cast-iron assemblies.
Skip if
- You need more than 30 inches of rip capacity for wider stock.
- You require cast-iron extension wings instead of steel.
- You need a portable saw for mobile jobsite tasks.
Verdict: Jet ProShop II 10-Inch Table Saw with Steel Wings delivers 1.75 HP cutting capability from a standard 120V outlet alongside a 30-inch rip capacity. It gives woodworkers a stationary cutting station equipped with steel wings and low-vibration belt drive mechanics.
JET ProShop II 10-Inch Table Saw with Cast Wings
Best for: wide rip capacity on standard 120V power
- Blade Diameter
- 10-Inch
- Rip Capacity
- 52-Inch
- Horsepower
- 1-3/4 HP
- Voltage
- 120V
- Dimensions
- 40 × 82 × 43 inches
- Weight
- 326 pounds
View on Amazon: JET ProShop II 10-Inch Table Saw with Cast Wings
This Jet ProShop II is a 10-inch table saw built with cast wings, a 1-3/4 HP motor, and a 52-inch rip capacity. Running on a standard 120V single-phase circuit, it provides wide cutting width without needing 230V wiring. Key hardware includes a magnetic paddle switch, quick-release riving knife, and an arbor lock. It suits you if you cut wide sheet stock but only have standard 120V outlets available in your shop.
Pros
- 52-inch rip capacity accommodates wide panels
- Runs on standard 120V single-phase power
- Cast wings and onboard storage for included accessories
- Quick-release riving knife and redesigned arbor lock
Cons
- At 326 pounds and 82 inches wide, it occupies substantial floor space
- 1-3/4 HP motor delivers less power than 3 HP or 5 HP alternatives
Good fit if
- You need a 52-inch rip capacity for wide panels.
- You run your tools on standard 120V single-phase electrical circuits.
- You prefer cast wings instead of stamped steel extensions.
Skip if
- You lack the floor area for an 82-inch wide stationary setup.
- You require a 3 HP or 5 HP motor for heavy industrial cutting.
Verdict: Jet ProShop II 10-Inch Table Saw with Cast Wings delivers extensive 52-inch rip capability on standard 120V single-phase electrical service. It gives you cast wings and practical blade controls without requiring a 230V circuit.
JET 18-Inch Variable-Speed Scroll Saw
Best for: detailed curve cutting and delicate fretwork
- Voltage
- 120V
- Dimensions
- 35.8 × 14.6 × 21.3 inches
- Weight
- 54 pounds
This machine is an 18-inch variable-speed scroll saw rather than a traditional table saw. Running on 120 volts, it operates between 400 and 1,550 strokes per minute across an 11-5/8 by 21-inch steel table. The arm tilts 45 degrees right and 30 degrees left, extending to 45 degrees when you remove the dust port. It suits you if you need intricate curve cutting and delicate detail work.
Pros
- Variable speed range from 400 to 1,550 strokes per minute
- Dual-action mechanism clamps and tensions blades simultaneously
- Spring-loaded top arm raises 10 inches and stays elevated
- Removable 2-1/2-inch dust port mounted under table
- Arm tilts 45 degrees right and up to 45 degrees left
Cons
- Functions as a scroll saw without rip capacity for large boards
- Dust port must be removed to tilt beyond 30 degrees to the left
Good fit if
- You need fine, detailed curved cuts at adjustable stroke speeds.
- You want an arm that tilts up to 45 degrees while the table stays flat.
- You work with standard 120V household outlets.
Skip if
- You need a circular blade for straight ripping and sheet breakdown.
- You require full left-tilt bevels without detaching the dust port.
Verdict: JET 18-Inch Variable-Speed Scroll Saw delivers precise speed control and dual-angle tilting for detailed fretwork. It provides specialty curved cutting rather than heavy lumber ripping.
JET 15-Inch 1.75 HP Woodworking Bandsaw
Best for: woodworkers resawing thick lumber and slicing veneers
- Horsepower
- 1-3/4 HP
- Voltage
- 115/230V
- Dimensions
- 29.9 × 24.6 × 79.5 inches
- Weight
- 382 pounds
This Jet 15-inch woodworking bandsaw operates on a dual-voltage 115V or 230V system with a 1.75 HP motor. Built with a precision-ground cast iron table and weighing 382 pounds, it provides solid stability for resawing thick stock, cutting book-matched panels, and slicing veneers. If you need a heavy stationary saw with toolless ball bearing blade guides and a micro-adjustable fence for versatile shop cutting, this model fits your space.
Pros
- Dual-voltage 1.75 HP motor operates on 115V or 230V single-phase power
- Toolless, independently adjustable upper and lower ball bearing guides
- Precision-ground cast iron table and cast iron handwheels
- Fence system includes a micro-adjustable, dual-position side plate
Cons
- Heavy 382-pound weight makes shop repositioning difficult
- Tall 79.5-inch vertical height requires high ceiling clearance
Good fit if
- You need dual-voltage flexibility to run on either 115V or 230V circuits.
- You resaw large lumber, slice veneers, or cut book-matched panels.
- You want toolless adjustments for upper and lower blade guide bearings.
Skip if
- You have low workshop ceilings that cannot fit a 79.5-inch tall frame.
- You need a lightweight machine that one person can move easily.
Verdict: Jet 15-Inch 1.75 HP Woodworking Bandsaw provides a rigid 382-pound cast iron foundation, dual-voltage power, and toolless guide adjustments for demanding resawing work.
Jet 10-Inch Sliding Dual-Bevel Miter Saw
Best for: compound angles and sliding crosscuts
- Blade Diameter
- 10-Inch
- Amperage
- 15-amp
- Voltage
- 115V
- Dimensions
- 37.3 × 24.8 × 14.5 inches
- Weight
- 47 pounds
This is a 10-inch sliding dual-bevel compound miter saw powered by a 15-amp motor running on standard 115V power. It features enclosed linear bearings for sliding cuts, front bevel controls, and adjustable side fences with extension tables. At 47 pounds, it gives you a dedicated crosscutting and angle-cutting machine to complement the rip cuts of a standard table saw in your shop.
Pros
- 15-amp motor operates on standard 115V power
- Dual-bevel capability with upfront controls
- Enclosed linear bearings for slide operation
- Built-in LED light for cutting visibility
- Includes dust bag and 2-1/2-inch dust port adapter
Cons
- Miter saw format cannot perform long rip cuts
- Weighs 47 pounds without an included rolling stand
Good fit if
- You need compound angle cuts and crosscuts alongside a ripping setup
- You want upfront bevel controls and sliding capacity on a standard 115V outlet
- You require adjustable extension tables and an ambidextrous handle
Skip if
- You need a machine designed primarily for ripping sheet goods and wide boards
- You require a traditional stationary table saw
Verdict: Jet 10-Inch Sliding Dual-Bevel Miter Saw delivers dedicated crosscutting and compound angles with its 15-amp motor and dual-bevel design. It serves as an angled cutting counterpart rather than a rip-cutting table saw.
JET 10-Inch XACTA Table Saw with 50-Inch Rip
Best for: wide sheet ripping in 230V workshops
- Blade Diameter
- 10-Inch
- Rip Capacity
- 50-Inch
- Horsepower
- 3 HP
- Voltage
- 230V
- Dimensions
- 85 × 36 × 38 inches
- Weight
- 510 pounds
View on Amazon: JET 10-Inch XACTA Table Saw with 50-Inch Rip
This cabinet table saw features a 3-horsepower motor running on 230-volt single-phase power, paired with a 10-inch blade. You get a 50-inch rip capacity via the commercial T-square fence, along with twin 11-inch cast iron extension wings. At 510 pounds, its stationary footprint measures 85 by 36 inches. It suits you if you need wide rip capability and heavy-duty cast iron stability for full sheet goods in a dedicated workshop space.
Pros
- 50-inch rip capacity handles wide sheet materials
- 3 HP motor built for continuous cutting loads
- Push-button arbor lock simplifies blade changes
- Two 11-inch cast iron extension wings maximize surface area
- Poly-V drive belt system supports quiet power transfer
Cons
- Requires a dedicated 230V circuit rather than standard 115V
- Heavy 510-pound mass restricts movement without specialized bases
- Large 85-inch overall length requires significant shop floor space
Good fit if
- You have an available 230V single-phase power supply.
- You rip wide panels up to 50 inches across.
- You want a stationary 510-pound cast iron work platform.
Skip if
- You only have access to standard 115V electrical outlets.
- You need a lightweight or mobile saw for a tight workshop.
- You do not have 85 inches of lateral clearance for the rails.
Verdict: Jet 10-Inch Deluxe XACTA 3 HP Table Saw provides broad 50-inch ripping capability backed by solid cast iron construction. Its 230V motor and wide stance trunnion deliver dependable power for permanent workshop setups.
Jet 18-Inch Band Saw with Foot Brake
Best for: deep resawing and cutting thick lumber
- Horsepower
- 1.75 HP
- Dimensions
- 10 × 10 × 10 inches
- Weight
- 383 pounds
This 18-inch stationary woodworking band saw delivers 1.75 horsepower with an expansive 16-inch resaw capacity and an 18-inch throat. It features a 27-1/4 by 20-inch tilting cast-iron table, toolless ball-bearing blade guides, dual 4-inch dust collection ports, and an integrated mechanical foot brake for quick stops. If you resaw thick lumber or cut large boards in a home or light production shop, this machine provides heavy capacity.
Pros
- Large 16-inch resaw capacity and 18-inch throat depth
- Step-activated foot brake stops blade and lower wheel quickly
- Toolless upper and lower ball-bearing blade guide adjustments
- Precision-ground cast-iron table tilts 45 degrees right and 5 degrees left
Cons
- Blade, miter gauge, and work light are sold separately
- Heavy 383-pound weight makes shop relocation difficult
Good fit if
- You need 16 inches of resaw height for slicing thick hardwood slabs.
- You want a mechanical foot brake for immediate hands-free stops.
- You run a dust extraction setup capable of supplying 600 CFM to two 4-inch ports.
Skip if
- You need a traditional table saw for ripping sheet goods and joinery.
- You want an out-of-the-box package that includes a blade and miter gauge.
Verdict: JET 18-Inch Band Saw with Foot Brake provides 16 inches of resaw clearance alongside reliable hands-free blade stopping for serious woodshops. It delivers rigid cast-iron support if you frequently cut large lumber and have your own blades.
Jet Deluxe XACTA 10-Inch 5 HP Table Saw
Best for: high-power stationary workshop cutting
- Blade Diameter
- 10-Inch
- Rip Capacity
- 30-Inch
- Horsepower
- 5 HP
- Voltage
- 230V
- Dimensions
- 65 × 36 × 38 inches
- Weight
- 330 pounds
This cabinet table saw pairs a high-output 5 HP motor with a 10-inch blade and a 30-inch rip capacity. Running on a 230V circuit, it features cast iron extension wings and a Poly-V drive belt system. You get a rail-mounted magnetic switch and a push-button arbor lock. It suits you if you need substantial cutting power for dense woods in a dedicated workshop space.
Pros
- High-output 5 HP motor for heavy ripping tasks
- Commercial XACTA II fence system with 30-inch rip capacity
- Twin 11-inch cast iron extension wings
- Push-button arbor lock for quick blade changes
- Poly-V drive belt system for smooth power transfer
Cons
- Requires a dedicated 230V power connection
- Weighs 330 pounds and lacks portability
- Rip capacity tops out at 30 inches
Good fit if
- You have an available 230V workshop circuit.
- You need maximum 5 HP cutting performance for thick stock.
- You want a heavy, stationary cast iron table surface.
Skip if
- You only have standard 115V wall outlets.
- You need to rip wide sheet goods beyond 30 inches.
- You require a portable saw that moves between job sites.
Verdict: JET Deluxe XACTA 10-Inch 5 HP Table Saw delivers substantial cutting power and stable cast iron mass for demanding shop work. Its 30-inch fence and 230V single-phase setup make it a heavy-duty choice for stationary installations.
Specifications side by side
| Spec | JET 14-Inch 1.75 HP Band Saw | Jet 9-Inch Benchtop Band Saw | Jet 10-Inch Band Saw with Stand | Jet 14-Inch 1 HP Band Saw | JET ProShop II 10-Inch Table Saw with Cast Wings | JET ProShop II 10-Inch Table Saw with 52-Inch Rip | JET 7 x 12-Inch Horizontal/Vertical Metal Band Saw | JET ProShop II 10-Inch Table Saw with Steel Wings | JET ProShop II 10-Inch Table Saw with Cast Wings | JET 18-Inch Variable-Speed Scroll Saw | JET 15-Inch 1.75 HP Woodworking Bandsaw | Jet 10-Inch Sliding Dual-Bevel Miter Saw | JET 10-Inch XACTA Table Saw with 50-Inch Rip | Jet 18-Inch Band Saw with Foot Brake | Jet Deluxe XACTA 10-Inch 5 HP Table Saw |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Blade Diameter | not specified | not specified | not specified | not specified | 10-Inch | 10-Inch | not specified | 10-Inch | 10-Inch | not specified | not specified | 10-Inch | 10-Inch | not specified | 10-Inch |
| Rip Capacity | not specified | not specified | not specified | not specified | 30-Inch | 52-Inch | not specified | 30-Inch | 52-Inch | not specified | not specified | not specified | 50-Inch | not specified | 30-Inch |
| Amperage | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | 15-amp | not specified | not specified | not specified |
| Horsepower | 1.75 HP | not specified | 1/2 HP | 1 HP | 1-3/4 HP | 1-3/4 HP | not specified | 1-3/4 HP | 1-3/4 HP | not specified | 1-3/4 HP | not specified | 3 HP | 1.75 HP | 5 HP |
| Voltage | not specified | not specified | 115V | 115/230V | 120V | 120V | not specified | 120V | 120V | 120V | 115/230V | 115V | 230V | not specified | 230V |
| Cutting Width | 13-Inch | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Dimensions | 75.5 × 27 × 37 inches | 19 × 14.1 × 29 inches | 34.6 × 13 × 16.5 inches | 26 × 19 × 68 inches | 60 × 40 × 43 inches | 82 × 40 × 43 inches | 48 × 17 × 44 inches | 60 × 40 × 43 inches | 40 × 82 × 43 inches | 35.8 × 14.6 × 21.3 inches | 29.9 × 24.6 × 79.5 inches | 37.3 × 24.8 × 14.5 inches | 85 × 36 × 38 inches | 10 × 10 × 10 inches | 65 × 36 × 38 inches |
| Weight | 272 pounds | 40 pounds | 83 pounds | 120 pounds | not specified | 286 pounds | 374 pounds | 236 pounds | 326 pounds | 54 pounds | 382 pounds | 47 pounds | 510 pounds | 383 pounds | 330 pounds |
| Color | White | not specified | White | White | White | White | Gray | White | White | White | White | White | White | White | White |
| Model | 714400K | JWBS-9 | JWB-10 | JWBS-14CS | JPS-10 | JPS-10 | HVBS-712D | JPS-10 | JPS-10 | JWSS-18B | JWBS-15 | JMS-10X | JTAS-10XL50-1DX | JWBS-18SFX | JTAS-10XL30-5/1DX |
| Size | not specified | not specified | not specified | 14-inch | not specified | not specified | 7 x 12" | not specified | not specified | not specified | not specified | not specified | 10-Inch | not specified | not specified |
The Jet Lineup at a Glance
The table saws divide primarily by horsepower and operating voltage. If you use standard 120V circuits, 1.75 HP models like the JET ProShop II 10-Inch Table Saw with Cast Wings provide 30-inch or 52-inch rip capacities for general sheet cutting. If your workshop has 230V service, stationary cabinet machines like the JET 10-Inch XACTA Table Saw with 50-Inch Rip and Jet Deluxe XACTA 10-Inch 5 HP Table Saw supply 3 HP to 5 HP for heavy rip cuts.
The remaining machinery covers curved cuts, resawing, and angled crosscuts. Stationary bandsaws, such as the JET 14-Inch 1.75 HP Band Saw, provide up to 13 inches of cutting width for thick stock. Benchtop bandsaws and miter saws serve woodworkers needing compact footprints for curved work or dedicated compound miter cuts.
Where Jet Fits Your Workshop
This selection suits woodworkers outfitting a permanent shop with stationary equipment. Machine weights range from a 40-pound benchtop saw to a 510-pound stationary table saw. Machine lengths span from 19 inches up to 85 inches. For table saws, power levels run from 1.75 HP to 5 HP with 30-inch to 52-inch rip capacities.
You will not find compact jobsite saws, folding wheel stands, or cordless battery tools here. Every listed table saw requires dedicated floor space, runs on 120V or 230V electricity, and strictly uses a 10-inch blade diameter.
Key Specs for Choosing Jet Saws
-
Matching Motor Horsepower
Motor horsepower dictates how cleanly a saw drives blades through dense stock. Jet table saw models supply between 1.75 HP and 5 HP. A 1.75 HP motor handles common sheet goods and standard lumber thickness without drawing excessive amperage. If you process thick hardwoods daily, select a heavier motor. The Jet Deluxe XACTA 10-Inch 5 HP Table Saw delivers maximum power for dense timber without bogging down during deep cuts. Match your planned cut depths and wood density to the motor output before choosing.
-
Selecting Fence Rip Capacity
Rip capacity measures the maximum distance between the blade and the fence. Jet builds saws with 30-inch, 50-inch, and 52-inch rip spans. A 30-inch rip fence saves floor space while managing regular board trimming and small sheet cuts. If you routinely break down four-foot by eight-foot plywood sheets, choose a wider configuration. The JET ProShop II 10-Inch Table Saw with 52-Inch Rip lets you slice past the center of full-sized panels without manual repositioning. Confirm your panel dimensions against the rip rating.
-
Checking Electrical Circuit Requirements
Check your shop electrical supply before settling on a saw. Jet tools operate on standard 120V lines, 230V circuits, or switchable 115/230V wiring. A 120V tool connects directly to conventional household receptacles without electrical upgrades. Larger saws demand a dedicated 230V connection to run their heavy-duty motors safely. The JET 10-Inch XACTA Table Saw with 50-Inch Rip relies exclusively on a 230V circuit to run its 3 HP motor. Inspect your breaker panel so your electrical infrastructure matches the required tool voltage.
-
Comparing Table Wing Materials
Table saw wings extend the support area on either side of the main cast-iron surface. Jet offers wing extensions in stamped steel or solid cast iron. Steel wings keep total machine weight lower, which eases workshop positioning. The JET ProShop II 10-Inch Table Saw with Steel Wings weighs 236 pounds, making it lighter than cast-wing equivalents. Solid cast-iron wings increase overall assembly mass and resist deflection under heavy boards. Decide whether you prefer lower machine weight or maximum table flatness and dampening.
-
Assessing Tool Weight Stability
Machine weight indicates structural stability, vibration absorption, and mobility. Jet machinery on this list spans from 40 pounds to 510 pounds. Lightweight machinery suits garages where you must stow gear after cutting. The Jet 9-Inch Benchtop Band Saw weighs only 40 pounds and rests easily on a standard workbench. Heavy stationary machines stay firmly in place during aggressive material feeds without shifting across the floor. If you lack a permanent, dedicated station, prioritize lighter tools or plan for mobile bases.
-
Measuring Workshop Footprint Space
Workshop floor area limits which machinery you can safely operate. Measure your available space against the tool dimensions before purchase. Long fence rails expand the width or length of the machine significantly. For example, the JET ProShop II 10-Inch Table Saw with Cast Wings measures 60 inches long by 40 inches wide. You must also maintain clearance around the table for infeed and outfeed board support. Compare the factory dimensions against your room layout to ensure unobstructed walking paths and safe movement.
Frequently asked questions
What blade diameter do Jet table saws use?
All Jet table saws in this comparison use a 10-inch blade diameter. This size applies across both the 1.75 HP ProShop II line and the heavy-duty Deluxe XACTA cabinet models. A 10-inch blade diameter gives you standard compatibility with widely available saw blades, dado stacks, and accessories across typical woodworking cuts.
What is the difference between cast iron and steel wings on the Jet ProShop II?
The primary difference lies in machine weight and table stability. For example, the 30-inch ProShop II with steel wings weighs 236 pounds, whereas the 52-inch cast-wing version weighs 326 pounds. Steel wings reduce total machine weight, making assembly or movement easier, while cast iron wings add mass to absorb motor vibration during cuts.
Can you run a Jet table saw on a standard 120-volt household circuit?
Yes, you can run all 1.75 HP Jet ProShop II table saws on standard 120V electrical circuits. Models like the JPS-10 operate directly on 120V lines with either 30-inch or 52-inch rip setups. However, more powerful units like the 3 HP and 5 HP Deluxe XACTA saws require a dedicated 230V power connection.
How much floor space does a Jet table saw require?
Jet table saw footprints vary significantly based on rip capacity and rail dimensions. The ProShop II with a 30-inch rip measures 60 inches long and 40 inches wide. In contrast, extended models like the 52-inch rip ProShop II reach 82 inches in length, and the 50-inch XACTA reaches 85 inches long by 36 inches wide.
Which Jet table saw offers the highest horsepower?
The Jet Deluxe XACTA model JTAS-10XL30-5/1DX offers the highest output with a 5 HP motor. It runs on a 230V electrical supply and features a 30-inch rip fence. If you need wide ripping instead of maximum horsepower, the 3 HP XACTA model provides 50 inches of rip capacity on 230V power.
Why are band saws and miter saws included in the Jet lineup?
The 15-model guide compares overall Jet shop machinery, where band saws and miter saws handle tasks table saws cannot perform. Jet band saws like the 14-inch model 714400K provide 13 inches of resaw depth for thick slabs. The JMS-10X sliding miter saw specializes in compound angle crosscuts rather than ripping sheet goods.
How much does the heaviest Jet table saw weigh?
The heaviest table saw in this comparison is the Jet 10-Inch XACTA Table Saw with 50-Inch Rip, weighing 510 pounds. This stationary weight provides a rigid, vibration-resistant platform for continuous cutting. By comparison, the 1.75 HP ProShop II models range between 236 pounds with steel wings and 326 pounds with cast iron wings.