ALORAIR 360 degree Intake Air Review: Who It Fits and Who Should Skip It

What stands out

• 360-degree air intake design for broad coverage
• Built-in ionizer for odor and dust reduction
• Two-stage speed selection with vortex fan
• Timer cycle controller for automatic shutdown
• Includes IR remote for easy operation

Who it fits

Key specs explained for ALORAIR

Airflow: 1050/1350 CFM

This value shows the volume of air the fan moves each minute. You get two settings, allowing you to adjust suction power based on your dust levels. Higher CFM helps clear sawdust faster than lower output units. This matters if you run a table saw that generates heavy chips. Compare this to other shop vacuums to ensure you have enough suction for your specific workspace size and dust generation rate.

Filtration Rating: 1um

The filter captures particles as small as one micrometer. This size includes fine woodworking dust that can linger in the air. Capturing these tiny particles improves your breathing quality while using a table saw. It also helps protect your lungs from long-term exposure to harmful wood dust. Look for this rating when buying filters to ensure they trap the smallest, most dangerous particulates from your cutting tools.

Voltage: 115V

This unit plugs into a standard household outlet. You do not need special industrial wiring or a heavy-duty circuit breaker. This makes setup simple in any garage or workshop. Most table saws also use this voltage, so you can likely share a power strip or nearby outlet. Check your shop layout to ensure you have a convenient 115V source near your workbench for easy access.

Mounting Style: Ceiling, workbench

You can hang this unit from the ceiling or place it on a flat surface. Ceiling mounting saves floor space, which is valuable in tight workshops. Workbench placement allows for easy mobility if you move your table saw. Use the included hook and chain for hanging. Consider your shop layout to decide which option keeps the unit close to your dust source while maintaining clear walkways.

Design and build details

The unit measures 20.5 inches long by 20.5 inches wide and 9.8 inches high. It weighs 27 pounds. The casing is finished in blue. According to the listing, this compact footprint allows you to place it on a workbench or hang it from the ceiling using the included hook and chain. This mounting flexibility lets you position the intake near your primary dust source, whether that is a scroll saw or a sanding station.

Controls are straightforward. You get a timer cycle controller that shuts the fan down automatically after one to nine hours. An IR remote system is also included for distance operation. The remote uses infrared signals, meaning you must keep it within line of sight. There is no wireless interference with other devices. This layout prioritizes simple manual operation over complex smart features.

The build supports two-stage speed selection. You can switch between airflow settings to match your workload. The strong vortex fan maintains high static pressure even when the filter captures significant wood chips. This design choice ensures consistent performance during heavy sanding or turning tasks. The 360-degree intake design helps cover a larger area with circulating airflow. You get a robust, functional tool built for garage or workshop environments where reliable air filtration is necessary.

Setup and everyday use

Setting up this unit involves choosing between two placement options. The listing notes it includes a hook and chain for ceiling suspension. You can also place it on a workbench. The electrical requirements are 115 volts at 60 Hz with a 1.5 amp draw. This standard household connection makes installation straightforward in most garages or workshops. You do not need specialized wiring for this device.

Daily operation centers on the timer cycle controller. You can set the fan to shut down automatically after one to nine hours. This feature helps you manage runtime without manual intervention. The unit also features an IR remote system. The listing states there is no wireless interference, providing strong anti-interference ability. You can adjust settings from a distance without standing next to the machine.

The 360-degree air intake design allows the system to cover a large area. It is rated for rooms up to 1700 square feet. The noise rating sits between 60 and 69 dB during operation. This range is typical for shop air cleaners of this size. The built-in ionizer subjects drawn-in air to electric discharge. This process targets pollutants and odor particles for oxidative degradation. You get two-stage speed selection on the strong vortex fan. This lets you maintain high static pressure even when the filter collects wood chips. The filter itself is designed for easy replacement when maintenance is needed.

Check compatibility and upkeep first

Before purchasing, verify your workspace voltage matches the 115V requirement. This unit is not compliant with California regulations, so it cannot be shipped to that state. You must account for the 27-pound weight if you plan to move it frequently, though the hook and chain allow for ceiling mounting to save floor space. The filter is rated MEVR 11, capturing 90% of particles down to 3-10 microns and 85% of 1-micron dust. You will need to replace these filters periodically to maintain the 1350 CFM airflow. Consider whether the 60-69 dB noise level fits your shop environment. This system complements table saws by cleaning the air after cutting. It does not replace dust collection at the source. Use it to manage fine particulate matter that escapes your primary collector. Check the 1700 square foot coverage limit for your room size. Ensure you have adequate electrical outlets for the 1.5 amp draw.

Check before you buy

• Confirm 115V power availability in your shop.
• Verify you do not live in California.
• Check if 1700 sq ft coverage suits your room.
• Plan for periodic MEVR 11 filter replacements.

The product at a glance

1

ALORAIR 1350 CFM Air Filtration System

Best for: Large workshops needing wide coverage and odor control

Airflow

1050/1350 CFM

Filtration Rating

1um

Voltage

115V

Amperage

1.5 A

Mounting Style

Ceiling, workbench

Intended Use

Garage

View on Amazon: ALORAIR 1350 CFM Air Filtration System Affiliate link

This ALORAIR unit features a 360-degree intake design with airflow ratings of 1050 or 1350 CFM. It covers spaces up to 1700 square feet using a vortex fan and includes a built-in ionizer for odor removal. The system uses MEVR 11 class filters to capture fine particles. You can mount it on a ceiling or workbench. It runs on 115V power and includes an IR remote for timer control.

Pros

• 360-degree air intake design for wide coverage
• Built-in ionizer reduces odors and improves air quality
• Two-stage speed selection with strong vortex fan
• MEVR 11 class filtration captures 90% of 3-10um particles
• Ceiling or workbench mounting options with hook and chain

Cons

• Cannot be shipped to California due to regulatory requirements
• Noise rating ranges from 60 to 69 dB
• Only includes IR remote, lacking wireless app control

Good fit if

• You need to cover a large workshop area up to 1700 sq ft
• You want to mount the unit on a ceiling or workbench
• You require odor elimination alongside dust filtration

Skip if

• You live in California and need compliant shipping
• You prefer quiet operation below 60 dB
• You need app-based remote control instead of IR

Verdict: ALORAIR 360 Intake Air Filtration System is a practical choice for woodworkers needing wide-area coverage and odor control. It fits shops where ceiling or bench mounting is preferred and California shipping restrictions do not apply.

Specifications side by side

Frequently asked questions

See also

• alorair 360 degree intake air alternatives
• best table saws under 150
• alorair stackable hepa air scrubber review
• giantex 360 degree swivel floor review